Specification | DI-4B-25 |
Measuring range | 0.30乣25 N 丂3.0乣250 kgf丒cm丂3.0乣220 lbf丒in |
Operative Measuring Range at P-D Mode | 0.70 - 25 N.m 丂丂7.0 - 250 kgf.cm丂丂7.0 - 220 lbf.in |
Accuracy | 亇 0.5% (in case of reading 499 or less = last digit +/- 3 reading) |
Display | Torque Meter | LED Digital Display, 4 digits |
Blow Counter | LED Digital Display, 2 digits (Displayed only in P-P mode) |
Measureing Direction | CW, CCW selectable with a Switch |
M''ment Mode | P-P Peak | Holding Peak Load Value |
T-R Track | Showing Real time torque value ( Used for Zero-Adjustment ) |
P-D Peak down | Holding Load Value at the moment to change from upward to downword |
Blow Counter | Count Range | Zero to 99 blow |
Count Time | 0.1 - 9.9 seconds |
Automatic Clearance | Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance |
One-touch-Zero Clearance | Easy Zero-Adjustment with pressing CLEAR button |
Data output | Serial Interface RS232C (Baud rate: 9600) |
Power Supply | Battery | Ni-Cd Chargeable Battery 1.2V x 5 cells (700mAh) |
Automatic PW off | Automatically power off after 5 minutes left without operation |
Charging time | Within 6 hours |
Continunous working time | 8 hours |
Battery Life Time | Chargeable more than 300 times |
Weight | 2.1kg |
Dimension | 150(W) x220(D) x74 (H) |
Accessories (one piece each) | Bit Socket ( 6.35 HEX - Subtense 17mm ) |
Measuring Joint : Hard Type (M10) & Soft Type (M10) |
Socket for Wrenches ( Subtense 17mm ) |
Dedicated AC/DC Adaptor (Charger), 230VAC or 120VAC- DC 7.5V 120mA Output |
Exclusive receipt case |
An inspection report, a proofreading certificate, traceability system figure |