日本思达（CEDAR)扭力扳手_详细资料

产品信息

日本思达电子数显扭力扳手操作简单，精度准确。

Screw tightening control

仠 DIGITAL TORQUE WRENCH DIW-120/75/20/15

(1) Unify the display sectiona frame. It became stronger.
(2) Display Measurement Mode, Unit, Etc. on Display Section.
(3) Data Output is USB Form.
(4) Prepare each button in accordance with operation.
Button operation became simple

＊The torque screwdriver is Ergonomiclight weight, yet ruggedly constructed
＊Available in: lb-in, kg-cmN-m
＊Peak, Real TimePeak Down measuring mode (selectable)
＊800 data memory.
＊Programmable HighLow set points with both audible beepGreen/Red LED indicator for uniform torque tightening or GO/NO GO testing
＊Programmable screw tightening counter
＊Programmable Auto Zero function resets unit to zero for easy operation
＊Both CWCCW operation
＊ASCII format output(USB)
＊Runs on internal NiCad batteries (for 12 hours) Auto shut-off after 10 min. of non-use
＊ AC chargercarrying case included.

NEW丂DEVELOPMENT
Wrench head awivels 300亱

Specification DIW-15 DIW-20 DIW-75 DIW-120

Measuring range N丒m
(at the time of Track) 0.20 - 15 N 0.20 - 20 N 0.20 - 75 N丒m 2.0 - 120 N丒m

2.0乣150 kgf丒cm 2.0乣200 kgf丒cm 2.0乣750 kgf丒cm 20乣1200 kgf丒cm

2.0乣130 lbf丒in 2.0乣180 lbf丒in 2.0乣650 lbf丒in 20乣1040 lbf丒in

Accuracy 亇0.5% (F/S)
(199 or less digit亇1digit) 亇0.5% (F/S)
(499 or less digit亇3digit) 亇0.5% (F/S)
(199 or less digit亇1digit乯

Display The 4 figures digital display of LCD

The measurement direction CW-CCW (rightleft)

Measuring
mode P-P Peak Holding Peak Load Value

T-R Track Showing Real time torque value ( Used for Zero-Adjustment )

P-D Peak down Holding Load Value at the moment to change from upward to downword

C Real-time output Load torque value is outputted every about1/ 160 second

Decision
function Setting of torque value Programmable HighLow setpoints with both audible beepGreen/ Red LED indicator for uniform torque tightening or GO/NO GO testing

The Maximum, the minimum,the average value Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels.

Data spec. Data transfer ASCII format (Baud rate : 19200)

Data memory 800 data / ten channels data

A setup of the number of counts One to 99 count (count in a direction with a bundle)

Auto power save 10 minutes no use, automatically switch off.

Charging time From empty - less than 5hours

Continunous working time 12 hours

Outside size 冇34(grip)亊236(L) 冇34(grip)亊235(L) 冇34(grip)亊320(L) 冇34(grip)亊445(L)

Socket engagement 6.35 square, including steel ball 9.5 square, including steel ball 12.7 square, including steel ball

Attachment - One-way socket

Accessories
(one piece each) AC/DC adaptor

An inspection report, a proofreading certificate, a traceability system figure

您可能感兴趣的产品

日本思达（CEDAR)扭力扳手

产品信息

联系我们

关注我们

Specification		DIW-15	DIW-20	DIW-75	DIW-120
Measuring range N丒m (at the time of Track)		0.20 - 15 N	0.20 - 20 N	0.20 - 75 N丒m	2.0 - 120 N丒m
		2.0乣150 kgf丒cm	2.0乣200 kgf丒cm	2.0乣750 kgf丒cm	20乣1200 kgf丒cm
		2.0乣130 lbf丒in	2.0乣180 lbf丒in	2.0乣650 lbf丒in	20乣1040 lbf丒in
Accuracy		亇0.5% (F/S) (199 or less digit亇1digit)		亇0.5% (F/S) (499 or less digit亇3digit)	亇0.5% (F/S) (199 or less digit亇1digit乯
Display		The 4 figures digital display of LCD
The measurement direction		CW-CCW (rightleft)
Measuring mode	P-P Peak	Holding Peak Load Value
	T-R Track	Showing Real time torque value ( Used for Zero-Adjustment )
	P-D Peak down	Holding Load Value at the moment to change from upward to downword
	C Real-time output	Load torque value is outputted every about1/ 160 second
Decision function	Setting of torque value	Programmable HighLow setpoints with both audible beepGreen/ Red LED indicator for uniform torque tightening or GO/NO GO testing
The Maximum, the minimum,the average value		Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Data spec.	Data transfer	ASCII format (Baud rate : 19200)
	Data memory	800 data / ten channels data
A setup of the number of counts		One to 99 count (count in a direction with a bundle)
Auto power save		10 minutes no use, automatically switch off.
Charging time		From empty - less than 5hours
Continunous working time		12 hours
Outside size		冇34(grip)亊236(L)	冇34(grip)亊235(L)	冇34(grip)亊320(L)	冇34(grip)亊445(L)
Socket engagement		6.35 square, including steel ball	9.5 square, including steel ball		12.7 square, including steel ball
Attachment		-	One-way socket
Accessories (one piece each)		AC/DC adaptor
		An inspection report, a proofreading certificate, a traceability system figure