日本思达（CEDAR)扭力起子_详细资料

产品信息

见详细说明

Bolting measurement of screwbolt

仠 TORQUE TESTER 丂DIS-RL series

Separate type merit!
Detection part is compact.

DIS-RL05
To measurement of the minute torque of 500 or less mN-m

Since the detection part was smalla light weight, minute torque measurement which needs prudence for handling was enabled.

DIS-RL2
Measurement to 2N丒m

It is easy to use measuring range widely.

DIS-RL6
Measurement to 6 N丒m

A new function is carried
(1) Display Board Became Legible.
丂(A Measurement modea unit. Other coded data is丂displayed.)
(2) Fault charge protection loading. It is pilot-lamp lighting during charge.

The main functions丂(DIS series)
仩 Yes-no decision丂
仩 Average calculation
仩 Data storage is 800 affairs.
仩 A convenient functional setup of a setup of a measurement start value etc.
仩 Data output at real time (every about 1/180 seconds).丂
仩 USB terminal data output

Specification DIS-RL05 DIS-RL2 DIS-RL6

Measuring range
2.0乣500 mN
0.020乣5 kgf丒cm
0.020乣4.5 lbf丒in 0.020乣2 N
0.20乣20 kgf丒cm
0.20乣18 lbf丒in 0.20乣6 N
2.0乣60 kgf丒cm
2.0乣54lbf丒in

Accuracy 亇0.5% (or less 499亇3digit)

Display The 4 figures digital display of LCD

The measurement direction CW-CCW (rightleft)

Measuring
mode P-P Peak Peak load value hold.

T-R Track Indication of real time torque value.

P-D Peak down Holding Load Value at the moment to change from upward to downword

C Real-time output Load torque value is outputted every about1/ 180 second by RS232C.

Decision
function Setting of torque value A topa minimum value are in a measuring range,a setup is possible.
Can confirm the set value by the buzzer sound or LED.

The Maximum, the minimum,the average value Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels.

clearance It is a display clearance in set-up time. (0.5 - 3.0 sec)

One-touch zero A clear button is pushedit is a zero. data output.

Data spec. Data transfer ASCII format (Baud rate : 19200)

Data memory 800 data stored

Power supply Ni-Cd chargeable battery 1.2V亊4cells 丂450mAh

Auto power save 10 minutes no use, automatically switch off.

Charging time about 3hours

Continunous working time 10 hours

Meter outside type dimension 100(W) x105(D) x33 (H) (It does not contain by the projection thing.)

Weight Meter part 520g

Bit/Socket part 兂4 HEX 6.35

Accessories
(one piece each)
兂4 bits
(亄)丂侐0/侐1 6.35HEX bits
(亄)丂侐1/侐2

Receipt case

AC/DC adaptor

An inspection report, a proofreading certificate, a traceability system figure

您可能感兴趣的产品

Bolting measurement of screwbolt
仠 TORQUE TESTER 丂DIS-RL series
Separate type merit! Detection part is compact.
	*DIS-RL05* To measurement of the minute torque of 500 or less mN-m Since the detection part was smalla light weight, minute torque measurement which needs prudence for handling was enabled.
	*DIS-RL2* Measurement to 2N丒m It is easy to use measuring range widely.
	*DIS-RL6* Measurement to 6 N丒m
A new function is carried (1) Display Board Became Legible. 丂(A Measurement modea unit. Other coded data is丂displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge.
The main functions丂(DIS series) 仩 Yes-no decision丂仩 Average calculation 仩 Data storage is 800 affairs. 仩 A convenient functional setup of a setup of a measurement start value etc. 仩 Data output at real time (every about 1/180 seconds).丂仩 USB terminal data output

Specification		DIS-RL05	DIS-RL2	DIS-RL6
Measuring range		2.0乣500 mN 0.020乣5 kgf丒cm 0.020乣4.5 lbf丒in	0.020乣2 N 0.20乣20 kgf丒cm 0.20乣18 lbf丒in	0.20乣6 N 2.0乣60 kgf丒cm 2.0乣54lbf丒in
Accuracy		亇0.5% (or less 499亇3digit)
Display		The 4 figures digital display of LCD
The measurement direction		CW-CCW (rightleft)
Measuring mode	P-P Peak	Peak load value hold.
	T-R Track	Indication of real time torque value.
	P-D Peak down	Holding Load Value at the moment to change from upward to downword
	C Real-time output	Load torque value is outputted every about1/ 180 second by RS232C.
Decision function	Setting of torque value	A topa minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum,the average value		Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
clearance		It is a display clearance in set-up time. (0.5 - 3.0 sec)
One-touch zero		A clear button is pushedit is a zero. data output.
Data spec.	Data transfer	ASCII format (Baud rate : 19200)
	Data memory	800 data stored
Power supply		Ni-Cd chargeable battery 1.2V亊4cells 丂450mAh
Auto power save		10 minutes no use, automatically switch off.
Charging time		about 3hours
Continunous working time		10 hours
Meter outside type dimension		100(W) x105(D) x33 (H) (It does not contain by the projection thing.)
Weight		Meter part 520g
Bit/Socket part		兂4	HEX 6.35
Accessories (one piece each)		兂4 bits (亄)丂侐0/侐1	6.35HEX bits (亄)丂侐1/侐2
		Receipt case
		AC/DC adaptor
		An inspection report, a proofreading certificate, a traceability system figure