溶氧电极

oxysens汉密尔顿溶氧(DO)电极

HAMILTON发酵溶氧电极、发酵DO电极、哈米尔顿发酵溶氧电极、高温DO电极、

HAMILTON发酵电极，哈米尔顿发酵电极，HAMILTON高温电极，哈米尔顿高温电极

哈米尔顿溶氧电极，HAMILTON发酵溶氧电极|发酵用DO电极OXYSENS

汉米尔顿溶氧电极，HAMILTON发酵溶氧电极|发酵用DO电极OXYSENS

夏米顿溶氧电极，HAMILTON微生物发酵电极|微生物发酵用DO电极OXYSENS

氧气：40ppb-饱和
0-60度；ZD压力为4bar
温补：22k欧姆 ntc
免维护

●市场上DY款免维护do 传感器.不需要更换膜或电解液
●广泛应用于水、废水、游泳池、鱼塘和化肥设备
●oxysenes有一个内置的22k欧姆的ntc温度补偿
●极化和反应时间极短
●5米固定缆绳，vp头根据要求订制
●12mm 不锈钢轴、120 毫米轴长度和pg13.5 螺纹

型号：             订购号：
oxysens 120        237 150

附件：
oxyferm membrane kit 237 123
membrane kit cip    237 126
membrane kit fda    237 140
oxylyte 50 ml       237 118
oxylyte usd 50 ml   237 136
replacement cathode oxyferm 237 306
各种护套
连接线

OXYSENS Dissolved Oxygen sensors First maintenance free dissolved oxygen sensor in the market; never change membranes or electrolyte again! Designed for use in water, waste water, pools fish farms and composting plants. Required flow for correct values is only 0.02 m/sec. Oxysens has a built-in 22 kOhm NTC for temperature compensation. 5 meter fixed and sealed cable 12 mm shaft and PG 13.5 connection

Ordering Information Part # Description 237150 OXYSENS Dissolved Oxygen Sensor, 22 kOhm NTC 237158 Immersing set - stainless steel housing, which allows the installation and immersion of the sensor in water, while at the same time providing protection to the sensor's membrane
Technical Specifications Polarization potential -670 ± 50 mV Current in air at 25° C 40...80 nA Response time, t98% Max. 60 seconds @ 25° C from air to nitrogen Measuring range 40 ppb to saturation Flow sensitivity ≤ 5% Temperature range Working: 0...60° C / 32...140° F Storage: -10...60° C / 14...140° F; with watering cap containing water Pressure range 0...4 bar / 0...58 psi Zero shift <0.5% of current in air every 2 months with 25° C water under stable conditions Sensitivity shift <10% every 2 months with 25° C water under stable conditions Temperature response Ca. 3.1% per K Installation PG 13.5 Electrical connector 5 meter, fixed cable with stripped ends Integrated temperature sensor OXYSENS sensor: 22 kOhm NTC Dimensions 12 x 120 mm