First, table model electrically operated centrifuge 800-1 Product synopsis:Table model electrically operated centrifuge 800-1 Is the conventional laboratory to use the centrifuge, widely applies in scientific research educations and the production department and so on the biology, chemistry, medicine.Low speed table model centrifuge highest rotational speed 4000R/MIN, is suitable for the emission immunity appraisal and the separation cell and the big particle, has may fixed time and may not fixed time two kinds.
Second, table model electrically operated centrifuge 800-1 Technical specification: Model | Highest rotational speed | Capacity | Relative centrifugal force | Fixed time scope | Power source |
800-1 | 4000rpm | 20ml×6 | 1795xg | 0-60min or Chang Kai | AC110V 60HZ |
ThreeTable model electrically operated centrifuge 800-1 security notices1st, use
Table model electrically operated centrifuge 800-1First reads the completely instruction for use in detail
2nd, before the work should put in the hollow tube evenly, moves 1-2 minute the machine by the highest rotational speed, discovered does not have exceptionally only then may work.
3rd, do not have to contact turning the head which revolves.
4th, forbid strictlys turning the head to move under the loading not balanced condition.
5th, the electric wire either the plug damage or the electric appliance equipment failure, should repair by the professional, the use manufacturer recommendation electric appliance equipment has not been able to create certain quality problem.
6th, do not have in the sunlight perpendicular incidence place use.
7th, the user provides the power source plug electrical fixed parameter should be bigger than the this aircraft the electric appliance fixed parameter, by good earth measure.
8th, being sure not places the this aircraft nearby the high temperature heating element.
9th, forbid strictlys in the revolution situation rotating the machine.
10th, the this aircraft forbid strictlys the intense hit.
11th, the replacement fuse, should draw out first the plug from the plug.
When 12th, revolution, certainly must cover the centrifuge canopy, guards against the object to enter, damages the machine.
13th, do not let the child use close the machine.
14th, forbid strictlys with the metal scouring the thing to carry on scours.Moistens the alkali using the soft cloth to carry on scours.
Fourth, table model electrically operated centrifuge 800-1 operating instructions:1.
Table model electrically operated centrifuge 800-1The work table should level firmly.The workshop neat clean, dry and ventilates good.
2. Starting front should first and turns the head the cavity to clean cleanly.
3. Beforehand the weighing consistent test tube correspondence will put in to the intelligence in.
4. Closure gentrifugalism canopy.The hypothesis fixed time time, closes the power switch.
5. The adjustment velocity modulation knob, rises to need the rotational speed.
6. The work finished, must modulate velocity the knob to put in the smallest position, the timer reset, switches off the power switch, the dump.
The wipe cavity and turns the head, closure gentrifugalism canopy
资料下载:
800离心机.doc
附件下载 (下载 0 次)
请 [登录] 后再下载!