耐电弧测试仪

耐电弧测试仪是根据 GB/T 1411-2002《固体绝缘材料耐高压低电流电弧放电的试验》（等同 IEC 61621-1997）及 ASTM D495 等标准的要求设计制造的，并符合 IEC 149、UL 746A 等试验方法。本仪器由绝缘标准制定单位全国绝缘材料标准化技术委员会监制。

主要用于电机、电器及家电等行业的电工用塑料、树脂胶、绝缘漆、以及层压板、覆铜箔板等绝缘材料的耐电弧性能及其分级评定。

二、功能特点

1 本产品采用智能控制技术，通过选择程序（IEC或 ASTM）可自动进行试验，并在工业触摸屏显示试验过程和结果。

2 控制系统采用西门子的 PLC和触摸屏通信进行控制。

3 安全性能良好，抗干扰能力强，测试精度高。

4 自动化程度高，按照设定的试验要求，自动升压到设定的电压后，自动完成试验并自动归零。

5 电压和电流具有自动校验功能，方便计量和校准

三、主要技术参数

1 电弧通断时间误差：小于 ±1ms

2 调压器容量：1kVA 变压器：1KVA，0-20KV

3 额定试验电压：12.5kV

4 试验电压精度：3%

5 电流控制精度：±3% 电流测量精度：1.5%

6 电极对试样压力：（0.5±0.05）N

7 电极材料：钨棒

8 电极距离：（6.35±0.1）mm（IEC）

（6.0±0.1）mm（ASTM）

9 使用环境温度：（23±2）℃

10 使用环境湿度：（50±5）%

11.输入电压交流 220V，输出交流电压 0-17.5KV

12.实验电流：10mA—20mA—30mA—40mA

13 电源：220V/ 50Hz

四、售后服务

1、我公司产品实行，质量三包，质量保证期为一年，终身服务，在质量保证期内，对由于设计、制造、工艺或材料的缺陷所发生的故障负责，并免费维修和更换缺陷的零件或整机，质量保证期过后硬件更换接受成本费用，软件免费升级。

2、对于我公司随机配置的易损件不在，质量三包，期内不做免费处理，但保证及时有偿长期优惠供应。

3、我公司在接到用户信息后1小时内提供解决方案，若需要拍专业维修工程师到现场服务，可在48小时内到达现场维修并解决一切故障。

4、在质保期满以后，我方将以优惠的价格提供保修服务，当发生故障时，我方仍将按第3项处理。

irst, an overview

The arc resistance tester is designed ａnd manufactured according to the requirements of GB/T 1411-2002 "high pressure low current arc discharge test" (equivalent IEC 61621-1997) ａnd ASTM D495, ａnd it is in conformity with the test methods of IEC 149, UL 746A ａnd so on. The instrument is supervised by the National Standards Committee on insulation materials.

It is mainly used for the electric arc resistance of electrical, resin adhesive, insulating varnish, laminated plate ａnd copper clad plate for electrical, electrical ａnd electrical appliances ａnd other industries.

Two, functional characteristics

1 this product uses the latest intelligent control technology, which can be tested automatically through the selection program (IEC or ASTM), ａnd the test process ａnd results are displayed on the industrial touch screen.

2 the control system is controlled by SIEMENS＇s PLC ａnd touch-screen communication.

3 the security performance is good, the anti-interference ability is strong, the test accuracy is high.

4 high degree of automation, according to the set of test requirements, automatically boost to the set voltage, automatically complete the test ａnd automatically return to zero.

5 voltage ａnd current have automatic calibration function to facilitate metering ａnd calibration.

Three. The main technical parameters

1 arc off time error: less than + 1ms

2 voltage regulator capacity: 1kVA transformer: 1KVA, 0-20KV

3 rated test voltage: 12.5kV

4 test voltage accuracy: 3%

5 current control accuracy: + 3% current measurement accuracy: 1.5%

The pressure of the 6 electrode on the sample: (0.5 + 0.05) N

7 electrode material: tungsten rod

8 electrode distance: (6.35 + 0.1) mm (IEC)

(6 + 0.1) mm (ASTM)

9 using ambient temperature: (23 + 2) C

10 use of ambient humidity: (50 + 5)%

11. input voltage AC 220V, output AC voltage 0-17.5KV

12. experimental current: 10mA - 20mA - 30mA - 40mA

13 power: 220V/ 50Hz

Four. After sale service

1, our company＇s products are implemented, quality three packages, quality assurance period for one year, life-long service, in the period of quality assurance, responsible for failure due to defects in design, manufacturing, process or material, ａnd free maintenance ａnd replacement of defective parts or machines, ａnd replacement of hardware ａnd cost after the period of quality assurance, software Free upgrade.

2, for our company randomly configured vulnerable parts are not, the quality of three packages, free of charge during the period, but guaranteed timely ａnd paid long-term preferential supply.

3, our company provides a solution within 1 hours after receiving the user information. If you need to take a professional maintenance engineer to the site service, we can reach the site maintenance ａnd solve all the faults within 48 hours.

4, after the expiration of the warranty period, we will provide warranty service at a preferential price. When there is a breakdown, we will still handle third items.