脉冲式涡流混合器_详细资料

产品信息

脉冲式涡流混合器，New ergonomic design新的符合人体工程学的设计LED displays for speed and timeLED显示速度和时间Continuous or touch mode operation连续或触摸式操作5 year industry leading warranty5年的行业领先的保修

脉冲式涡流混合器 Ergonomic Pulsing Vortex Mixer, 230V脉冲涡流混合器
产品资料：
New ergonomic design provides optimum comfort ａnd minimal stress. Talboys Pulsing Vortex Mixer provides powerful pulsing vortex action which produces excellent cell disruption for glass bead procedures. Capable of complete cell disruption of samples in only minutes. Unique pulsing action reduces heat generation while providing more effective mixing ａnd disruption. Timer can be set from 1 second to 160 hours. Displayed time counts up during continuous operation ａnd counts down during timed runs. Vortex mixer is supplied with a cup head, 3-inch head with cover ａnd an easy-to-load 1.5mL to 2mL Micro-Tube Holder. The holder has a built-in cup holder. Vortex mixers include a 5 year, industry leading limited warranty on parts ａnd labor.
新的符合人体工程学的设计提供了的舒适性和Z小应力。脉冲涡流混合器提供了强大的脉冲涡流作用所产生的玻璃珠程序优良的细胞裂解托尔博伊斯。可在几分钟完成细胞裂解样品。独特的脉冲作用减少热量产生的同时提供更有效的混合和中断。定时器可以设置从1秒到160小时。显示时间计数和计数下降在连续操作过程中定时运行。旋涡混合器提供一杯头，3头罩和易于加载1.5mL 2mL微型管架。人有一个内置的杯架。旋涡混合器包括一个5年，行业领先的部件和人工有限保修。
Operating Conditions: Vortex mixer can be run in conditions from 4 to 40°C (39 to 104°F), 20% to 85% relative humidity, non-condensing.
操作条件：旋涡混合器可以运行条件从4到40 C（39～104°°F），20%至85%相对湿度，无冷凝。
产品特点：

Microprocessor Control微处理器控制

Microprocessor control maintains set speed for strong, consistent mixing action. 微处理器控制保持速度一致的混合作用强，

LED display

Touch pad controls with easy-to-read, independent LED displays for speed ａnd time allow operator to view both settings at once. Provides repeatable ａnd accurate results every time ａnd is easilty visible across lab benches. Timer will display elapsed time or, when programmed to user defined limit, will shut off unit when time reaches zero.

Pulsing Mode

Unique pulsing action reduces heat generation while providing more effective mixing ａnd disruption.

参数规格：

Part #

9456TAPSEU

Speed Range

500 to 2500 rpm

Certifications

CE Mark

Control Type

Pulsing

Speed Disclaimer

Maximum speed will vary depending on accessory used.

Warranty

5 year industry leading warranty on parts ａnd labor

Unit Type

Pulsing

Orbit

2.5 mm

Unit Supplied With

Includes cup head, three-inch head with cover ａnd an easy-to-load 1.5mL to 2mL Micro-Tube Holder.

Frequency

50/60 Hz

Controls

Auto/Standby/On Rocker Switch, LED Displays for Speed ａnd Time, Up/Down Buttons for Set-Point Control, Pulse Button

Origin

Manufactured in the USA

Voltage

230V Euro Plug

Duty Rating

Intermittent Duty

Price

Amps

0.6

Dimensions

7 x 4.4 x 5.3" (17.8 x 11.2 x 13.5 cm)

Watts

150

Operating Conditions

4 to 40°C (39 to 104°F), 20% to 85% relative humidity, non-condensing

您可能感兴趣的产品

脉冲式涡流混合器

产品信息

联系我们

关注我们

Microprocessor Control微处理器控制	Microprocessor control maintains set speed for strong, consistent mixing action. 微处理器控制保持速度一致的混合作用强，
LED display	Touch pad controls with easy-to-read, independent LED displays for speed ａnd time allow operator to view both settings at once. Provides repeatable ａnd accurate results every time ａnd is easilty visible across lab benches. Timer will display elapsed time or, when programmed to user defined limit, will shut off unit when time reaches zero.
Pulsing Mode	Unique pulsing action reduces heat generation while providing more effective mixing ａnd disruption.

Part #	9456TAPSEU	Speed Range	500 to 2500 rpm	Certifications	CE Mark
Control Type	Pulsing	Speed Disclaimer	Maximum speed will vary depending on accessory used.	Warranty	5 year industry leading warranty on parts ａnd labor
Unit Type	Pulsing	Orbit	2.5 mm	Unit Supplied With	Includes cup head, three-inch head with cover ａnd an easy-to-load 1.5mL to 2mL Micro-Tube Holder.
Frequency	50/60 Hz	Controls	Auto/Standby/On Rocker Switch, LED Displays for Speed ａnd Time, Up/Down Buttons for Set-Point Control, Pulse Button	Origin	Manufactured in the USA
Voltage	230V Euro Plug	Duty Rating	Intermittent Duty	Price
Amps	0.6	Dimensions	7 x 4.4 x 5.3" (17.8 x 11.2 x 13.5 cm)
Watts	150	Operating Conditions	4 to 40°C (39 to 104°F), 20% to 85% relative humidity, non-condensing