通过将反馈杠杆的位置从A转移到b,可以在直接和反向之间切换价值操作。(然而,输出管道必须改变。)同时,通过选择凸轮的结构,可以改变其特征。对于线性运动,可以用标准凸轮来选择线性和相等的特性。选择任何一种旋转运动,改变凸轮以获得适当的相同的%特性,平方律特征,和相等的反向%(可选)。
Features Durable for vibration and available various posture. Wide variation for specs. 请来电咨询 苏曼 13530663386 | | |
Cam action and characteristics are selectable
Value action can be switched between direct and reverse by shifting 90[deg] the position of the feedback lever A from A to B.(However the output piping has to be changed.) Also, the structure is such that the characteristics can be changed by selecting the cam. For linear motion, the standard cam can be used to select the characteristics of linear and equal %. Select any of these rotary motion, change the cam to obtain proper equal % characteristics, square-law characteristics, and equal reverse % (optional).
4 phase cam for linear motion
1.Figures above illustrate how the fiducial line on the linear motion cam is related to its bearing position. Figure A shows the direct action and Figure B shows the reverse action.
2.To use the cam for equal %, reassemble the cam so that the cam position mark on it faces 180[deg] opposite. Then slide the lever A setting position by 90[deg] (within the motion range of 45[deg]) in the same way as for linear motion to change between direct and reverse actions.
Cam for rotary motion
The cam for rotary motion(C3L) is normally set to linear. For equal % or other characteristics, replace the cam. Slide the lever A setting position by 180[deg] in the same way as for linear motion to change between direct and reverse actions (within the operating range of 90[deg]).