Bridge power supply | DC10 V±0.3 V within 120 mA (Changeable to DC2.5 V or 5 V) with remote sensing. |
Input range | F.S. setting can be made with the input range of 0.3 mV/V to 3 mV/V. (At the time of bridge power supply is DC10 V.) ±F.S. setting can be available with the input range of ±0.6 mV/V to ±3 mV/V. (At the time of selection of of +/- display mode at the function setting) (At the time of bridge Power Supply is DC10 V) |
Zero adjustment range | ±2.4 mV/V |
Non-linearity | 0.01 %F.S. |
Temperature efficient | Zero point ±0.2 μV/℃ (Input conversion) Sensitivity ±0.001 5 %F.S./℃ |
A/D sampling | 100 times/s |
Input filter | 4 Hz |
Load display | |
Display range | -1 000 to 11 000 (Changeable to x 2, x 5 or x 10) -11 000 to 11 000 (Changeable to x 2, x 5 or x 10, When +/- display mode is set with Function setting.) |
Condition display | RUN, A/Z, LOCK, HOLD, CHECK |
Display of setting | 7segment fluorescence display tube and each 7 digits of S1, S2, S3 and S4 with 4.5 mm character height. |
Bar meter display | Displays the percentage of present load compared to the rated capacity (100 %) by 11 dots bar meter display. |
Display times | 4 times/s (20 times/s can be available depending on the setting.) |
External control function | ZERO, A/Z, A/Z OFF, HOLD, LOCK, A-SEL |
Comparator function | |
Set value | -999 999 to 999 999 |
Set quantity | S1, S2, S3, S4 points |
Conversion times of comparator | 30 times/s |
Contact output function | 4 points of S1, S2, S3 and S4 |
Operating temp./humidity range | Temperature -10 ℃ to 50 ℃, Humidity 85 %RHo r less (Non condensing) |
Power supply voltage | AC100 V (AC85 V to AC132 V) 50/60 Hz |
Power consumption | Approx.19 VA (without options, at AC100 V) Approx.23 VA at maximum (with options.) |
Outline dimensions(WxHxD) | 192 mm x 96 mm x 175 mm (excludes protruding parts) |
Weight | Approx. 1.9 kg (without options) |