供应无菌均质器价格，JOYN-10拍打式均质器，智能液晶拍打式无菌均质器，均质器

拍打式均质器价格，JOYN-10拍打式均质器厂家
联系电话：183 2100 4009－－刘俊－－QQ：2851513071

上海拍打式均质器技术参数：
★型号：JOYN-10
★有效容积：3～400ml
★定时范围：0~99.99分种
★可变速度：3～12次/秒
★拍击间距：0～50mm可调
★可储存程序数：3组
★无菌均质袋：30×17cm
★均质袋数量：50只（赠送）
★样品架隔断：5段（选配）
★使用环境温度：0~45℃
★电源要求：220V/50Hz
★整机功率：300W
★整机重量：22Kg
★外形尺寸：380×220×310mm

加热型拍打式均质器主要特征：
●大屏幕液晶显示。
●可调整的均质时间和均质速度。
●可储存三组工作程序。
●无菌一次性滤袋，保证卫生和安全。
●拍击器可调整前后距离。
●玻璃透明窗口易于观察。
●全开启式门，易于清洗。
●拍打式均质器具有停电数据恢复记忆功能。
●拍击器可调整前后距离，使厚/薄样品样品的处理达到Z好的均质效果。
●均质柔和、样品无污染、无损伤、不升温、不需要灭菌处理，不需洗刷器皿。
●样品与均质仪无接触，不需进行系统清洗。
●拍打式均质器粉碎完成后，自动发出蜂鸣声。
●通过LCD确认运行状态、速度、时间的功能。
●为操作者的安全着想，设计有自动停止霍尔开关装置，以防止操作失误夹伤手指。
●渐进式均质，的细胞保护功能。
●均质器内腔采用316全不锈钢系统。
●废液槽以防止样品袋泄漏。
产品说明：JOYN品Pai拍打式均质器广泛应用于食品微生物分析；动物组织、生物样品、化妆品的均质处理；肉、鱼、蔬菜、水果、饼干；药品的微生物分析等。固体样品中提取细菌的过程变得操作简单，只需将样品和稀释液加入到无菌的样品袋中，然后将样品袋放入拍打式均质器中即可完成样品的处理。减少了样品的处理和准备时间，处理后的样品溶液可以直接进行取样和分析，没有样品的变化和交叉污染的危险。

1. Due to the constant contact with acid, alkali ａnd water, ａnd the instrument has 220V ac, the laboratory socket must have a good grounding.

2. After each use of the instrument, apply the filter paper to drain the water from the filter base.

3, when the crucible in 500 ℃ high temperature furnace burning after 1 hour, don＇t immediately remove the crucible, be careful in furnace temperature ａnd furnace temperature of the temperature difference is too big to make the crucible.

4. When handling the lifting handle, pay attention to the slow improvement of the handle, while paying attention to the right of the upper ａnd lower glass mouth to prevent improper operation ａnd damage the instrument.

5. When it is difficult to extract filter, it is recommended to use vacuum pump to filter ａnd see the schematic diagram.

6. Use distilled water for the first time when you are not familiar with it, ａnd then draw off to do the experiment.

After finished 7, using the instrument, it is best to the flasks acid, alkali poured out, again add tap water in the bottle, the crucible mount, adding water respectively in the crucible, ａnd then removed respectively, with washing line.

8, after get the test results, in order to remove residues in the samples, the crucible core crucible should be in the 30% - 50% concentration of hydrochloric acid solution soak for a few hours, ａnd then after drying, water washing for next time use.

9. Please pay attention to safety during operation, with thick latex gloves ａnd gloves to prevent acid ａnd alkali from touching the hands. When taking out the crucible, wear a cloth glove ａnd be careful to burn your hands.

【产品