如需更详细资料或报价请资询:龙定国 Tel: 86br />Fax: 86br />Mail: document.write('')document.write('') document.write('')@163.comdocument.write('')Q Q: 32174454MSN: document.write('')document.write('')Web: document.write('')www.eastco-hk.comdocument.write('')美国BARCOR Hole Gauge/快测孔径规/孔规BARCOR HOLE GAGE快速孔径测量仪被设计用来快速量测细小平整或凹孔的直径。 11种型号有效的含括了孔径的范围,从0.010”-1.030”或0.25mm-26.15mm。 此种孔径规的工作原理是藉由滑动的尖针到直线读出0.0001”或0.001mm刻度。 此高功能的孔径规,特别适合量测薄金属板上的小孔、塑料制品、印刷电路板、燃油喷射嘴、薄壁管子 英制Model(型号) Capacity(范围)040 0.010"- .040"130 0.030"- .130"230 0.130"- .230"330 0.230"- .330"430 0.330"- .430"530 0.430"- .530"630 0.530"- .630"730 0.630"- .730"830 0.730"- .830"930 0.830"- .930"1030 0.930"- 1.030" 公制Model(型号) Capacity(范围)040M 0.25- 1.00mm130M 0.75- 3.30mm230M 3.30- 5.85mm330M 5.85- 8.35mm430M 8.35- 10.90mm530M 10.90- 13.50mm630M 13.50- 16.00mm730M 16.00- 18.55mm830M 18.55- 21.00mm930M 21.00- 23.60mm1030M 23.60- 26.15mm INSTANTLY MEASURE SMALL HOLE DIAMETERSThe BARCOR HOLE GAGE is a precision instrument designed to instantly give you a diameter reading in less than two seconds. Merely insert the precision ground, hardened tool steel Gaging Plunger into the hole, press the base of the gage firmly against the part and read the dial directly in .001" or .02mm diameter increments on the dial face. The HOLE GAGE is a direct reading gage. No Setting Master (Standard) or look-up chart is required. To check the setting, press the base of the gage against any flat ground surface and adjust the dial to read the “Set To” number stamped on the back. 22 Models (11 English/11 Metric) cover a range capacity from .010" (.25mm) to 1.030" (26.20mm). Individual gages, except for Model 040, have .100" capacity. Model 040 has .030" capacity. AGD Group-2 Dial Indicator with easy to read 2-1/4" Dia. dial. Yellow-for-Metric dial faces to prevent accidental misuse. All gages furnished with foam lined Storage Case and complete operating instructions. Optional NBS Certification available. Smallest diameter available is .004" (.10mm) on specials. Optional Setting Masters available for greater accuracy. Available individually or in convenient sets. Super Hole Gage available with .0001" or .001mm resolution. Electronic Hole Gage with .0001"/.005mm and SPC, also available.