日本思达(CEDAR)扭力测试仪_详细资料

产品信息

见详细资料

Rotation starting torquethe load torque under rotation

仠ROTATE TORQUE TESTER丂NTS-6 Series

Measurement by the high precision gearmotorthe strain meter
While an output shaft carries out self-rotation, the load fluctuation of a solid of revolution is caught by the sensor.

The main features
- Peak, Real timeRGmode.(selectable)
- Programmable HighLow set points with both audible beepGreen/Red LED indicator for uniform torque tightening or GO/NO GO testing.
- The type of series is five kinds.
It is adapted for various torque ranges (0.1 mN-m - 2 N-m).
- External inputoutput are also substantial.
An OK-NG outputdata output External start signal input
- By RG mode (real-time output) loading, a torque wave is also simply with a personal computer.

Specification丂

Specification NTS-6

S-1 S-2 S-5 S-10 S-20

Measuring range
(at the time of Track) 3.0乣100
mN丒m 3.0乣200
mN丒m 0.030乣0.5
N丒m 0.030乣1
N丒m 0.030乣2丂
N丒m

Accuracy 亇1丂亾

2 mN丒m丂or Less丂亇3dijit 0.2 N丒m丂or Less丂亇3dijit

Rotational frequency
(at the time of no-load) 85倰倫倣 25倰倫倣 13倰倫倣 18倰倫倣 18倰倫倣

Display The 4 figures digital display of LCD

The measurement direction CW-CCW Possible (rightleft) It rotates by the motor.

Measuring
mode Peak operation mode (PP):
Display the maximum under measurement .

Truck mode (GO):
Always display the load torque which has started.

RG mode (PD):
Carry out the data output of the load torque every 1/ 87 seconds.

Measurement start time Time after beginning rotation until it starts measurement is set up
(0.0 - 1 second).

Measuring time Time to measure is set up (1 - 20 seconds).

Torque judging It is in measuring rangea setup of a maximum valuea minimum value is possible.[ O.K.丂I値 the Set point ] Lamp lighting : [ NG Outside the Set point ] Error buzzer

External inputoutput Signal output (open collector): O.K., NG
Data output: ASCII Format (baud rate9600), External start switch input

Power supply AC100V乣240V

bit size 冇 4 HEX6.35

Outside size indicator 165乮W乯亊110乮D乯亊58乮H乯

Outside size detector 冇28亊155 冇37亊195 冇40亊235

Accessories
(one piece each)
Inspection report, Proofreading certificate, Traceability system figure

您可能感兴趣的产品

日本思达(CEDAR)扭力测试仪

产品信息

联系我们

关注我们

Specification	NTS-6
	S-1	S-2	S-5	S-10	S-20
Measuring range (at the time of Track)	3.0乣100 mN丒m	3.0乣200 mN丒m	0.030乣0.5 N丒m	0.030乣1 N丒m	0.030乣2丂 N丒m
Accuracy	亇1丂亾
	2 mN丒m丂or Less丂亇3dijit		0.2 N丒m丂or Less丂亇3dijit
Rotational frequency (at the time of no-load)	85倰倫倣	25倰倫倣	13倰倫倣	18倰倫倣	18倰倫倣
Display	The 4 figures digital display of LCD
The measurement direction	CW-CCW Possible (rightleft) It rotates by the motor.
Measuring mode	Peak operation mode (PP): Display the maximum under measurement .
	Truck mode (GO): Always display the load torque which has started.
	RG mode (PD): Carry out the data output of the load torque every 1/ 87 seconds.
Measurement start time	Time after beginning rotation until it starts measurement is set up (0.0 - 1 second).
Measuring time	Time to measure is set up (1 - 20 seconds).
Torque judging	It is in measuring rangea setup of a maximum valuea minimum value is possible.[ O.K.丂I値 the Set point ] Lamp lighting : [ NG Outside the Set point ] Error buzzer
External inputoutput	Signal output (open collector): O.K., NG Data output: ASCII Format (baud rate9600), External start switch input
Power supply	AC100V乣240V
bit size	冇 4			HEX6.35
Outside size indicator	165乮W乯亊110乮D乯亊58乮H乯
Outside size detector	冇28亊155		冇37亊195	冇40亊235
Accessories (one piece each)	Inspection report, Proofreading certificate, Traceability system figure