用于双光子显微镜的电光调制器系统_详细资料

产品信息

产地类别进口

用于双光子显微镜的电光调制器系统
Conoptics是光学和激光附件制造业的先驱，开发了一套用于多光子显微镜的电光调制器。

多光子荧光显微镜结合了先进的激光扫描显微镜技术，使用红外波长获取更高分辨率的三维图像，多光子荧光显微镜是非常实用的研究工具。

Conoptics调制器采用KD*P晶体，光束从ZX入射，ZX出射，标准的波长范围从700nm到1100nm。电源使用Model 302RM，拥有1us的上升和下降沿的时间，可作为一个250KHz高速开关，并且可作为一个强度调制器。
用于双光子显微镜的电光调制器系统
调制器参数：

Aperture
3.5mm
Dimensions
50mm Diameter * 135mm
Transmission
>90%
Standard Wavelength Ranges
700-1100nm
Piezo Resonances
Minimal with clamped version(BK option)
Driver Compatibility
Full modulation with M302 Power Amplifier up to 1064nm

放大器参数：

Cabinet
Driver and power supply in single cabinet
Test Feature
Built-in test feature allows testing for max transmission of Pockel Cell with out adjusting bias voltage
DC Bias
Improved DC biasing of Pockel Cell provides greater linearity at higher bias voltages
Voltage Range
+/- 450VDC controlled by ten-turn front panel pot. Digital meter monitors differential bias applied to E.O. Modulator
Linearity
10bits referenced to full scale (.1%)
Bandwidth
DC to >200Khz with 90pf load and 3M (RG-62) cables
Max. Output Drive Level
750VP-P into 90pf load
Amplifier Input Signal
2VP-P max into 50/1K ohms delivers 750VP-P out
Input Signal Format
Options include Unipolar positive, negative or bipolar
Input Power (AC)
60W typical. Input power is both load (modulator) and frequency dependent.
Dimensions
19” Rack Mountable, 5.25”H(133mm) (3U) x 14”D (356mm)
Cooling
Forced air
Operating Environment
Designed for laboratory use (indoor only)
Temperature range +5deg C to +50deg C ambient
Humidity 20%-80% RH up to 32deg C
Altitude <3000M
Weight
20lbs (9.07kg)

您可能感兴趣的产品

Aperture	3.5mm
Dimensions	50mm Diameter * 135mm
Transmission	>90%
Standard Wavelength Ranges	700-1100nm
Piezo Resonances	Minimal with clamped version(BK option)
Driver Compatibility	Full modulation with M302 Power Amplifier up to 1064nm

Cabinet	Driver and power supply in single cabinet
Test Feature	Built-in test feature allows testing for max transmission of Pockel Cell with out adjusting bias voltage
DC Bias	Improved DC biasing of Pockel Cell provides greater linearity at higher bias voltages
Voltage Range	+/- 450VDC controlled by ten-turn front panel pot. Digital meter monitors differential bias applied to E.O. Modulator
Linearity	10bits referenced to full scale (.1%)
Bandwidth	DC to >200Khz with 90pf load and 3M (RG-62) cables
Max. Output Drive Level	750VP-P into 90pf load
Amplifier Input Signal	2VP-P max into 50/1K ohms delivers 750VP-P out
Input Signal Format	Options include Unipolar positive, negative or bipolar
Input Power (AC)	60W typical. Input power is both load (modulator) and frequency dependent.
Dimensions	19” Rack Mountable, 5.25”H(133mm) (3U) x 14”D (356mm)
Cooling	Forced air
Operating Environment	Designed for laboratory use (indoor only) Temperature range +5deg C to +50deg C ambient Humidity 20%-80% RH up to 32deg C Altitude <3000M
Weight	20lbs (9.07kg)