TPA-BNC转接头示波器转接器美国泰克Tektronix

TPA-BNC转接头示波器转接器美国泰克Tektronix

购买须知：

1.请您先确定产品的具体型号。

2.如果不确定型号，可以参考我们页面上提供的详细介绍或者直接咨询我们。

3.网页上的价格仅作参考，准确价格请电联我司。

4.货期方面请与我司，因为不同产品的货期是不一样的。

5.同一产品不同时间的价格与货期也是不一样的

6.其他的具体相关事宜，请。

7.谢谢您的光临！                                                                   

新型TPA-BNC
TekProbe-BNC 到TekVPI探头接口适配器连接到TekVPI 示波器上。这一适配器通过示波器的TekVPI 探头通道连接器上的BNC接口传送相连的TekProbe 采集的模拟测量信号。
此外，TPA-BNC适配器为操作相连的TekProbe-BNC Level 2 探头类型转换和提供要求的探头电源。其支持、并为用户提供了相连的 TekProbe-BNC Level 2 探头类型的所有性能特点和功能。
适用于：
TCP0030－交直流电流探头
TAP1500－ 1.5 GHz 有源电压探头
TAP2500－ 2.5 GHz 有源电压探头 

Features & Benefits

Enables Existing TekProbe® Products to Connect to Oscilloscopes with the TekVPI™ Probe Interface
An Easy-to-use Plug-in Adapter to the Oscilloscope’s TekVPI Interface
Provides Necessary Power, Communication, and Offset Control as Needed by the Attached TekProbe Product
Provides Overcurrent and Thermal Overload Protection for the Attached TekProbe Product
Provides an LED Probe Status Indicator which Identifies that the Probe has Powered-up Successfully
Applications

TPA-BNC转接头示波器转接器美国泰克Tektronix

Adapts Existing TekProbe® Probe Types for Application with TekVPI™ Oscilloscopes
TekVPI™ Interface Adapter

TPA-BNC Adapter enables existing TekProbe® interface products (active, differential, high-voltage, current, and optical probes) to be used with the newest generation of Tektronix oscilloscopes which feature the TekVPI™ probe interface architecture. Existing TekProbe-BNC probe types simply plug into the TPA-BNC adapter which is then plugged directly into any channel of an oscilloscope equipped with the TekVPI probe interface. The TPA-BNC adapter recognizes and supplies the necessary power and serial communication and offset control as used by the connected TekProbe product accessory.

Note: Tektronix probe types using a BNC connection, or a BNC connection with a single analog encoding pin for attenuation factor detection connect directly to the oscilloscope’s TekVPI probe interface and do not require a TPA-BNC adapter.

TekProbe® Interface

TekProbe is a probe interface architecture introduced in 1986, and used on many earlier models of Tektronix oscilloscopes including the TDS300, TDS400, TDS500, TDS600, TDS700, TDS3000/B/C, TDS5000/B, and TDS7000 Series. In addition to coupling the signal from the probe to the oscilloscope, the TekProbe interface provides power and offset control to active probes. It also allows the oscilloscope to sense the probe’s attenuation scale factor and/or probe type.