MSP430F1612IPM 深圳TI/德州MSP430F1612IPM原装进口

深圳TI/德州MSP430F1612IPM原装进口

MSP430F1612 (正在供货)

16 位超低功耗 MCU，具有 55kB 闪存、5120B RAM、12 位 ADC、双 DAC、2 个 USART、I2C、HW Mult 和 DMA

封装：QFP64  包装：1000/包

深圳市恒创亿科技有限公司

地址：深圳市龙岗区龙岗大道远洋新干线C座605

：，

：2313605325

深圳TI/德州MSP430F1612IPM原装进口

TI型号

工作温度：−40°C to 85°C

PACKAGED DEVICES:

PLASTIC 64-PIN QFP (PM):SP430F155IPM MSP430F156IPM MSP430F157IPM MSP430F167IPM MSP430F168IPM MSP430F169IPM MSP430F1610IPM MSP430F1611IPM MSP430F1612IPM

PLASTIC 64-PIN QFN (RTD):MSP430F155IRTD MSP430F156IRTD MSP430F157IRTD MSP430F167IRTD MSP430F168IRTD MSP430F169IRTD MSP430F1610IRTD MSP430F1611IRTD MSP430F1612IRTD

描述

德州仪器（TI）MSP430系列超低功耗微控制器由多个器件组成，具有针对各种应用的不同外设。 该架构结合五种低功耗模式进行了优化，以延长便携式测量应用的电池使用寿命。 该器件具有功能强大的16位RISC CPU，16位寄存器和恒定发生器，有助于实现Z高的代码效率。 数字控制振荡器（DCO）允许在低功耗模式下从低功耗模式唤醒到主动模式。

特性

低电源电压范围：1.8 V至3.6 V

超低功耗

工作模式：在1 MHz，2.2 V时为330μA

待机模式：1.1μA

关模式（RAM保持）：0.2μA

参数 

相关终端应用

Ÿ  可视门铃

Ÿ  平板电脑：多媒体

Ÿ  无线接入点系统

Ÿ  无线环境传感器

Ÿ  漏水检测仪

Ÿ  烟雾和温度探测器

Ÿ  电子智能锁

Ÿ  破损玻璃检测器

Ÿ  空气质量和气体检测

Ÿ  脉动式血氧计

Ÿ  血糖监护仪

Ÿ  访问控制 HMI 键盘

Ÿ  车镜 - 侧镜

Ÿ  输液泵

Ÿ  运动检测器（PIR 和微波等）

Ÿ  进入控制面板

Ÿ  遥控钥匙或紧急按钮

Ÿ  铁路运输 - 感测

Ÿ  门窗传感器

Ÿ  门键盘和阅读器

Ÿ  防火安全发声器、扬声器和频闪灯

 Low Supply-Voltage Range, 1.8 V... 3.6 V Ultralow-Power Consumption: − Active Mode: 330 μA at 1 MHz, 2.2 V − Standby Mode: 1.1 μA − Off Mode (RAM Retention): 0.2 μA Five Power-Saving Modes Wake-Up From Standby Mode in less than 6 μs 16-Bit RISC Architecture, 125-ns Instruction Cycle Time Three-Channel Internal DMA 12-Bit A/D Converter With Internal Reference, Sample-and-Hold and Autoscan Feature Dual 12-Bit D/A Converters With Synchronization 16-Bit Timer_A With Three Capture/Compare Registers 16-Bit Timer_B With Three or Seven Capture/Compare-With-Shadow Registers On-Chip Comparator Serial Communication Interface (USART0), Functions as Asynchronous UART or Synchronous SPI or I2CTM Interface Serial Communication Interface (USART1), Functions as Asynchronous UART or Synchronous SPI Interface Supply Voltage Supervisor/Monitor With Programmable Level Detection Brownout Detector Bootstrap Loader I 2C is a registered trademark of Philips Incorporated

 Serial Onboard Programming, No External Programming Voltage Needed Programmable Code Protection by Security Fuse Family Members Include: − MSP430F155: 16KB+256B Flash Memory 512B RAM − MSP430F156: 24KB+256B Flash Memory 1KB RAM − MSP430F157: 32KB+256B Flash Memory, 1KB RAM − MSP430F167: 32KB+256B Flash Memory, 1KB RAM − MSP430F168: 48KB+256B Flash Memory, 2KB RAM − MSP430F169: 60KB+256B Flash Memory, 2KB RAM − MSP430F1610: 32KB+256B Flash Memory 5KB RAM − MSP430F1611: 48KB+256B Flash Memory 10KB RAM − MSP430F1612: 55KB+256B Flash Memory 5KB RAM Available in 64-Pin Quad Flat Pack (QFP) and 64-pin QFN (see Available Options) For Complete Module Descriptions, See the MSP430x1xx Family User’s Guide, Literature Number SLAU049 de

description The Texas Instruments MSP430 family of ultralow power microcontrollers consist of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low power modes is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that attribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less than 6μs. The MSP430x15x/16x/161x series are microcontroller configurations with two built-in 16-bit timers, a fast 12-bit A/D converter, dual 12-bit D/A converter, one or two universal serial synchronous/asynchronous communication interfaces (USART), I2C, DMA, and 48 I/O pins. In addition, the MSP430x161x series offers extended RAM addressing for memory-intensive applications and large C-stack requirements. Typical applications include sensor systems, industrial control applications, hand-held meters, etc.

深圳市恒创亿科技有限公司

地址：深圳市龙岗区龙岗大道远洋新干线C座605

：，

：2313605325