U2进口射频导纳连续物位计
Overview
RF Admittance technology with manual calibration and a 4 – 20 mA output signal.
Patented Cote-Shield™ circuitry ensures accuracy and reliability regardless of product build-up on the sensor U2进口射频导纳连续物位计
Unaffected by changes in the process material density, pressure, or temperature variations
The widest selection of sensing elements for full process compatibility in the harshest of environments
Output
4-20 mAdc
Supply Voltage
11.5 - 50 Vdc at transmitter
Maximum Load Resistance
Vs (power supply) -11.5
.02
(i.e. max 625 ohms@ 24 Vdc)
Supply Voltage Error
± 0.2% maximum of full scale from 11.5 to 50 VDC
Accuracy
± 1% nominal
Ambient Temperature Limits
-40°F to 170°F (-40°C to 77°C)
Output Isolation
4000 volt minimum signal wire to sensor
Load Regulation
0.2% for zero to maximum load resistance
Response Time
0.5 seconds (standard)
0.5-30 seconds (optional)
Allowable Static Discharge to Sensor
10 amps maximum
100 amps with optional protection circuit
Sensing Element Connection
¾-inch NPT (standard)
Flange mounting (optional)
Electronic Housing:
Meets NEMA 1-5 and 12 including NEMA 4X. Suitable for Class I, Groups A, B, C, D; Class II, Groups E, F & G; Class III; Div. 1 & 2. The housing is suitable for Explosion Proof installations in Div. 1 hazardous locations when the electronics are powered from an approved source. Refer to system Control Drawings for proper and safe installation and wiring.
Area Classifications:
Cables and Sensors are intrinsically safe for all Groups, Division 1 & 2 when the electronics are powered from an approved source. The electronics are intrinsically safe for Groups C, D, E, F & G, Division 1 when powered from an approved source. The system (electronic unit, cable and sensor) is non-incendive and non-sparking and suitable for all Groups, Div. 2 without intrinsic safety barriers.
Maximum Cable Length
100 feet (30 m) (remote mount only)
该产品由深圳市银飞电子科技有限公司提供,销售商地址位于广东省深圳市福田区华强北路群星广场A座22楼2217。请您仔细阅读产品使用说明书,正确使用。
如果想SY该产品,请以下单位:
银飞电子主要销售通信设备、仪器仪表、电力设备、热工仪表、校准设备及工具配件。