PSM1700 英国牛顿PSM1700 PSM1700多功能相位增益分析仪频率响应分..._详细资料

产品信息

深圳市宏美瑞科技有限公司------英国牛顿N4L公司ZG区域一级代理销售平台
英国牛顿NEWTONS4TH LTD PSM1700 PSM1700多功能相位增益分析仪 频率响应分析仪|频率特性分析仪PSM1700 Frequency Response Analyzer
10μHz–1MHz Versatile High Performance Gain/Phase Frequency Response Analyzer
PSM1700 PsimetriQ is a comprehensive DFT and true RMS analysis instrument for R&D and production test applications. Specifically aimed at a range gain/phase analysis applications, amongst which include switched mode power supply feedback loop stability analysis and general frequency response analysis of filters. It has a clear, bright graphics display showing real time values or graphs or tables. It can be operated compley by remote control over RS232 or LAN as an option. When combined with the IAI (Impedance Analysis Interface) the PSM become a high accuracy 1MHz Impedance Analyzer/ LCR meter. It is designed to give optimum performance, speed of measurement and convenience, providing sophisticated measurement capability in a cost effective and easy to use bench top instrument.
Product Images
The LCR Active Head is ideal for LCR measurements up to 5MHz
The PSM1700 Frequency Response Analyzer features 100Vpk isolated inputs
The PSM1700 can be combine with an Impedance Analysis Interface for ultimate versatility
The PSM1700 can be combined with the N4L IAI Impedance Analysis Interface, transforming the PSM into a high accuracy LCR meter

Features & Benefits
Frequency range 10μHz to 1MHz
Floating differential inputs – 100 Vpk
Gain accuracy at < 1 kHz 0.02 dB
Phase accuracy at < 1 kHz 0.02°
Frequency response analyzer
Impedance analyzer
Vector Volt Meter / Phase Angle Volt Meter
RMS Volt Meter
Loop response analysis
Harmonic analyzer
PSM1700 Options, Software and Accessories
Communications Interfaces:
Standard: RS232
Optional: LAN(Option L), GPIB(Option G)
Probes and Probe Accessory Options:
LCR1 Active Head + Kelvin Lead Set
IAI Impedance analyser Interface + Kelvin Lead Set
IAI Kelvin Fixture Axial and Radial Component connection for LCR measurements
TA107 Transimpedance Amplifier
TTF35 ecom Test Fixture
PSM1 Power Meter Adaptor (Enables Power Measurements with the PSM1700)
LCR Kelvin Head Kelvin Replacement Lead Set
HVx100 2500V Attenuating Probe
Injection Transformer Options
Standard Injection Transformer 10Hz to 200kHz
High Frequency Injection Transformer 500Hz to 35MHz
High Voltage Injection Transformer 5Hz to 15MHz 600V CAT II Isolation
Low Frequency Injection Module DC to 100kHz
Current Measurement Options:
HF010m 10mΩ/20Arms 1MHz Bandwidth Current Shunt
HF100m 100mΩ/6Arms 1MHz Bandwidth Current Shunt
HF470m 470mΩ/3Arms 1MHz Bandwidth Current Shunt
HF01A 1Ω/1Arms 1MHz Bandwidth Current Shunt
Port Accessory Options:
USB to 9 Pin RS232 Serial Converter
Carry Cases:
PSM Soft Carry Case – Black Nylon Padded Case with accessory space, handle and strap
Rack Mounting Kit Options:
PSM17xx Rack Mounting Kit – 19″ Rack Mount Kit including brackets and fixing screws for PSM17xx
Calibration and Documentation:
Standard Recalibration – PSM17xx
Standard Recalibration - PSM17xx + IAI
External Laboratory ISO17025 UKAS Calibration + Standard Calibration – PSM17xx
Spare set of user manuals – Hard copy of user and communications manual
PC Software (Free of charge):
PSMComm – PSM PC Interface Software, databasing, graphs, real time data display
PSMSoft – Labview Executable with PSM, including Nyquist Simulation
Application Notes and Related Articles
Below are a list of application notes related to the field of frequency response analysis
APP020 - PSRR (Power Supply Rejection Ratio Testing) with the PSM
APP020 - Amplifier Frequency Response Analysis with the PSM
APP016 - Testing RFI line filters with the PSM
APP009 - Measuring low THD with the PSM17xx
APP008- N4L’s guide to LCR measurement with the IAI
APP006 – High Voltage Capacitance Measurement with the PSM series analyzers
APP005 - Measuring Fluctuating Signals with the PSM
APP004 - Testing FSK communications with the PSM
APP003 - Using the PSM with LVDT’s
APP002 - Testing Loop Stability with the PSM
APP001 - Testing communications transformers with the PSM
MEASUREMENT SPECIFICATIONS

FREQUENCY RESPONSE ANALYSER
Measurement
Magnitude, Gain (CH1/CH2 or CH2/CH1), Gain (dB), Offset Gain (dB), Phase (?)
Frequency Range
10μHz to 1MHz
20mHz to 500kHz with External Source
Gain Accuracy in dB
0.02dB < 1kHz
0.05dB < 10kHz
0.1dB + 0.003?/kHz < 1MHz
Phase Accuracy
0.02? < 10kHz
0.02? + 0.003?/kHz < 1MHz
Frequency Source
Generator or CH1 Input
Measurement
Real Time DFT, no missing data
Speed
Up to 100 readings per second
Filter
Selectable from 0.2 seconds
Resolution
5 or 6 digits
VECTOR VOLTMETER
Measurement
In-Phase, Quadrature, Tan Φ, Magnitude, Phase, In-Phase Ratio, rms, rms ratio,
LVDT Differential,
LVDT Ratiometric
Frequency Range
10μHz to 1MHz
20mHz to 500kHz with External Source
Basic Accuracy (ac)
0.05% range + 0.05% reading + 0.05mV < 1kHz
Basic + 0.02%/kHz < 10kHz
Basic + 0.2% + 0.002%/kHz < 1MHz
LCR METER
Functions
L, C, R (ac), Q, tan delta, impedance, phase - Series or Parallel circuit
Frequency Range
10μHz to 35MHz
Current Shunt
External or N4L active head or IAI (Impedance Analysis Interface)
LCR Measurement Functions
Resistance (R)
1mOhm to 500MOhm
Reactance (X)
1mOhm to 500MOhm
Impedance (Z)
1mOhm to 500MOhm
Capacitance Value (Cp & Cs)
1pF to 1mF
Phase Angle
0 to 360 deg with 0.001 degree resolution
Q. Factor
+/- 0.00001 ~ 9999.99
Tan Delta (Reciprocal of Q, also known as Dissipation Factor D)
+/- 0.00001 ~ 9999.99
Admittance (Y) reciprocal of impedance (Siemen)
+/- 2nS to 1KS
Conductance (G) resistive part of admittance (Siemen)
+/- 2nS to 1KS
Susceptance (B) reactive part of admittance (Siemen)
+/- 2nS to 1KS
Voltage Bias
+/- 10V
Ranges
(LCR Head or IAI)
Inductance - 100nH to 10kH
Capacitance - 10pF to 1000μF
Resistance - 10mΩ to 100MΩ
Basic Accuracy
0.1% + tolerance of selected current shunt
Sweep Capability
All ac functions
TRUE RMS VOLTMETER
Channels
2
Frequency Range
DC to 1MHz
Measurement
rms, ac, dc, peak, cf, surge, dBm
Basic Accuracy (ac)
As VVM + 0.2mV
Accuracy (dc)
0.1% range + 0.1% reading + 1mV
POWER METER
Measurements
W, VA, PF, V, A, total, fundamental and integrated, power harmonics
Frequency Range
20mHz to 1MHz
Current Shunt
External or use N4L power adaptor
Current Accuracy
As Voltage + external shunt tolerance
Watts Accuracy
0.15% VA range + 0.15% reading + external shunt tolerance
HARMONIC ANALYSER
Scan
Single or Series
Frequency Range
10μHz to 1MHz
Measurement
Harmonic, series THD or difference THD
Max Harmonic
50
SYSTEM SPECIFICATIONS
INPUT RANGES
Inputs
2 Differential
Connectors
Isolated BNC
Coupling
ac or ac+dc
Max Input
100Vpk from earth
Input Ranges
100V, 30V, 10V, 3V, 1V, 300mV, 100mV, 30mV, 10mVpk
Scaling
1 x 10^-9 to 1 x 10^9
Ranging
Full auto, Up only or manual
Input Impedance
1M // 50pF (exc leads)
SIGNAL GENERATOR
Type
Direct Digital Synthesis
Frequency
10μHz to 1MHz
Waveforms
Sine, Triangle, Square, Sawtooth
Accuracy
(with no trim)
Frequency ±0.05%
Amplitude ±5% < 100kHz
Amplitude ±10% < 1MHz
Accuracy (with trim)
Amplitude ±1% < 1MHz
Impedance
50Ω ±2%
Output Voltage
0V to ±10Vpk
Output Resolution
5mV
Offset
0V to ±10Vpk
Offset Resolution
±10VmV
Clock Rate
11.52MHz
Connector
Grounded BNC
DATALOG
Functions
Up to 4 measured functions user selectable
Datalog Window
From 10ms with no gap between each log
Memory
RAM or non - volatile up to 8,000 records
HIGH SPEED DATA STREAMING
Rate
1500 readings/s max
Window
660μs to 1s Synchronized to waveform
Buffer
8000 results
GENERAL
Display
320 x 240 dot LCD - white LED backlight
Alarm
Any displayed function Hi, Lo, Inside Window or Outside Window
Program Stores
100, prog 1 loaded on power up
Sweep Stores
30, all parameters in any sweep function
Remote Operation
Full capability, control and data
Size
170H x 350W x 250D mm approx
Temperature
5 to 35?C
Weight
4Kg approx
Power Supply
90-264V rms 47-63Hz 30VA max
Showing 1 to 91 of 91 entries

产品简介
　　一、主要功能
　　增益和相位的分析
　　绕零件的测试
　　插入式回转损失，全部谐波失真比率
　　复合式阻抗及L.C.R分析
　　宽频的电力分析
　　快速双频道宽频电压表（示波器）2MHz
　　可选择式的位准表
　　可量相位角度
　　电压和电流的波形显示
　　二、显示部分
　　振幅、相位、扫描响应或量测数据的列出
　　可将大型结果、显示幕放大
　　三、特性
　　可隔离及浮接输入直流2MHz（频率）有示波器的功能
　　可自动将杂讯和谐波排除掉
　　可做为信号发生器；正弦波10mHz～1MHz
　　方波、三角波、锯齿波10mHz～1MHz
　　输出电压±10mV　to　±10V
　　量测均可加上警铃的功能
　　具有RS-232介面可连接至PC
　　具有PRINTER　PORT列印介面，可直接列印：HP、EPSON、CANON

　　四、应用范围
　　可做为闭路回路回授系统的测试
　　绕式零件及变压器的测试
　　可测试ISDN、ADSL、HDSL等变压器
　　可做复合式的阻抗良测
　　可做为电力及信号失真的分析
　　可做为电力线负载信号的量测
　　可做为化学阻抗的规划分析
　　可做为非线性系统的特性分析

　　POWERTEK　GP102　GAIN　PHASE 　　
　　1、可做为示波器使用
　　CHANNELS：2CH（隔离及浮接式）
　　频率范围：DC～2MHZ
　　Z大输入电压：500VPEAK（地封峰值）
　　可做为阻抗量测
　　频率：100Hz　to　40MHz
　　阻抗范围：10Hz　to　100MO
　　2、相位表功能：
　　频率：10mHZ　to　2MHz
　　相位准确度：0.02°∠100Hz
　　0.05°∠1KHz
　　0.5°∠10KHz
　　可做为增盆相位量测
　　范围：10Hz　to　100MHz
　　-10”dBm　to　15　dBm
　　3、增盆相位分析：
　　频率范围：　10mHzto　2MHz
　　准确度：±0.02db
　　可做为L　C　R　M　E　T　E　R　JG　IMJ　量测
　　范围：10PF　to　0.1F
　　1nH　to100KH
　　10mO　to　100MO
　　4、可做为L.C.R.METER量测
　　频率范围：10mhz　to　2MHZ
　　功能：L.C.R.
　　范围：　10mHzto　2MHz
　　有HPIB（GPIB介面）
　　可程式化控制，显示图形及数据
　　5、可做变压器的分析
　　电感100mH　to　1000H
　　电压圈数比1：70000to　70000：1
　　电感圈数比1：2000to　2000：1
　　显示：7.5时彩色CRT显示
　　6、可做为信号产生器用
　　正弦波10mHZ　to　2.4MHz
　　方波｀三角波｀锯齿波10MHz　～1mHz 　　

　　7、任意波形产生器32KBYTESMAX 　　
　　8、通讯产生器，输出电压-10 　　
　　9、可做为电力计使用可量测W　VA　PF　V　A

更多电子测试测量仪器仪表，欢迎您：深圳市宏美瑞科技有限公司/ sales17@hongmeirui.com :
仪器仪表、示波器、探头、红外热像仪、罗氏线圈、电子负载、交直流电源、大功率电源、万用表、频谱仪、网络分析仪、音频分析仪、耐压测试仪、环路分析仪、信号发生器、安规测试仪等.

MEASUREMENT SPECIFICATIONS
FREQUENCY RESPONSE ANALYSER
Measurement	Magnitude, Gain (CH1/CH2 or CH2/CH1), Gain (dB), Offset Gain (dB), Phase (?)
Frequency Range	10μHz to 1MHz 20mHz to 500kHz with External Source
Gain Accuracy in dB	0.02dB < 1kHz 0.05dB < 10kHz 0.1dB + 0.003?/kHz < 1MHz
Phase Accuracy	0.02? < 10kHz 0.02? + 0.003?/kHz < 1MHz
Frequency Source	Generator or CH1 Input
Measurement	Real Time DFT, no missing data
Speed	Up to 100 readings per second
Filter	Selectable from 0.2 seconds
Resolution	5 or 6 digits
VECTOR VOLTMETER
Measurement	In-Phase, Quadrature, Tan Φ, Magnitude, Phase, In-Phase Ratio, rms, rms ratio, LVDT Differential, LVDT Ratiometric
Frequency Range	10μHz to 1MHz 20mHz to 500kHz with External Source
Basic Accuracy (ac)	0.05% range + 0.05% reading + 0.05mV < 1kHz Basic + 0.02%/kHz < 10kHz Basic + 0.2% + 0.002%/kHz < 1MHz
LCR METER
Functions	L, C, R (ac), Q, tan delta, impedance, phase - Series or Parallel circuit
Frequency Range	10μHz to 35MHz
Current Shunt	External or N4L active head or IAI (Impedance Analysis Interface)
LCR Measurement Functions
Resistance (R)	1mOhm to 500MOhm
Reactance (X)	1mOhm to 500MOhm
Impedance (Z)	1mOhm to 500MOhm
Capacitance Value (Cp & Cs)	1pF to 1mF
Phase Angle	0 to 360 deg with 0.001 degree resolution
Q. Factor	+/- 0.00001 ~ 9999.99
Tan Delta (Reciprocal of Q, also known as Dissipation Factor D)	+/- 0.00001 ~ 9999.99
Admittance (Y) reciprocal of impedance (Siemen)	+/- 2nS to 1KS
Conductance (G) resistive part of admittance (Siemen)	+/- 2nS to 1KS
Susceptance (B) reactive part of admittance (Siemen)	+/- 2nS to 1KS
Voltage Bias	+/- 10V
Ranges (LCR Head or IAI)	Inductance - 100nH to 10kH Capacitance - 10pF to 1000μF Resistance - 10mΩ to 100MΩ
Basic Accuracy	0.1% + tolerance of selected current shunt
Sweep Capability	All ac functions
TRUE RMS VOLTMETER
Channels	2
Frequency Range	DC to 1MHz
Measurement	rms, ac, dc, peak, cf, surge, dBm
Basic Accuracy (ac)	As VVM + 0.2mV
Accuracy (dc)	0.1% range + 0.1% reading + 1mV
POWER METER
Measurements	W, VA, PF, V, A, total, fundamental and integrated, power harmonics
Frequency Range	20mHz to 1MHz
Current Shunt	External or use N4L power adaptor
Current Accuracy	As Voltage + external shunt tolerance
Watts Accuracy	0.15% VA range + 0.15% reading + external shunt tolerance
HARMONIC ANALYSER
Scan	Single or Series
Frequency Range	10μHz to 1MHz
Measurement	Harmonic, series THD or difference THD
Max Harmonic	50
SYSTEM SPECIFICATIONS
INPUT RANGES
Inputs	2 Differential
Connectors	Isolated BNC
Coupling	ac or ac+dc
Max Input	100Vpk from earth
Input Ranges	100V, 30V, 10V, 3V, 1V, 300mV, 100mV, 30mV, 10mVpk
Scaling	1 x 10^-9 to 1 x 10^9
Ranging	Full auto, Up only or manual
Input Impedance	1M // 50pF (exc leads)
SIGNAL GENERATOR
Type	Direct Digital Synthesis
Frequency	10μHz to 1MHz
Waveforms	Sine, Triangle, Square, Sawtooth
Accuracy (with no trim)	Frequency ±0.05% Amplitude ±5% < 100kHz Amplitude ±10% < 1MHz
Accuracy (with trim)	Amplitude ±1% < 1MHz
Impedance	50Ω ±2%
Output Voltage	0V to ±10Vpk
Output Resolution	5mV
Offset	0V to ±10Vpk
Offset Resolution	±10VmV
Clock Rate	11.52MHz
Connector	Grounded BNC
DATALOG
Functions	Up to 4 measured functions user selectable
Datalog Window	From 10ms with no gap between each log
Memory	RAM or non - volatile up to 8,000 records
HIGH SPEED DATA STREAMING
Rate	1500 readings/s max
Window	660μs to 1s Synchronized to waveform
Buffer	8000 results
GENERAL
Display	320 x 240 dot LCD - white LED backlight
Alarm	Any displayed function Hi, Lo, Inside Window or Outside Window
Program Stores	100, prog 1 loaded on power up
Sweep Stores	30, all parameters in any sweep function
Remote Operation	Full capability, control and data
Size	170H x 350W x 250D mm approx
Temperature	5 to 35?C
Weight	4Kg approx
Power Supply	90-264V rms 47-63Hz 30VA max

您可能感兴趣的产品

PSM1700 英国牛顿PSM1700 PSM1700多功能相位增益分析仪频率响应分...

产品信息

联系我们

关注我们

Frequency range 10μHz to 1MHz	Floating differential inputs – 100 Vpk
Gain accuracy at < 1 kHz 0.02 dB	Phase accuracy at < 1 kHz 0.02°
Frequency response analyzer	Impedance analyzer
Vector Volt Meter / Phase Angle Volt Meter	RMS Volt Meter
Loop response analysis	Harmonic analyzer

PSM1700 英国牛顿PSM1700 PSM1700多功能相位增益分析仪 频率响应分...

产品信息

联系我们

关注我们

PSM1700 英国牛顿PSM1700 PSM1700多功能相位增益分析仪频率响应分...