4YCM系列超小型翘板开关 超小型翘板开关双边复位回弹型翘板开关
特色:小尺寸,單腳數和雙腳數,可選擇裝在PC或是面板上.
應用範圍:電信,儀器.測試設備,醫療設備.
超小型翘板开关双边复位回弹型翘板开关规格
功率:取决于触点材料【3 A @ 120VAC 和 28VDC 1 A@ 250VAC/Z大0.4 VA @ Z高20V AC/DC】
机械寿命:30000次操作以上
接触电阻:在2-4VDC,100mA时,镀银于镀金触点
的Z大电阻为20毫欧。
绝缘电阻:Z小1000兆欧
绝缘强度:触点间Z低1000VAC至少一分钟,在触点与
外壳之间Z低1000VAC至少一分钟
工作温度范围:-30度到85度
材质
外壳&铜头:苯二酸二烯丙酯树脂(UL94V-0)
翘板:尼龙,黑色(标准)
铜头:黄铜镀镍
框架:不锈钢
支撑支架:铜镀锡
弹片/端子:镀银或镀金
焊锡条件
手工焊:用烙铁30瓦,控制在350℃,约5秒,同时应用焊料.
波峰焊:推荐焊接温度:260±5℃
锡侵泡时间:Z多5秒.(PCB板的厚度为1.6mm)
焊接:波峰炉
http://www.yeswitch。。com
SPECIFICATIONS
CONTACT RATING: Dependent upon contact material.
MECHANICAL LIFE: 30,000 make-and-break cycles.
CONTACT RESISTANCE: 20 m??max. initial @ 2-4VDC
100mA for both silver and gold plated contacts.
INSULATION RESISTANCE: 1,000 M??min.
DIELECTRIC STRENGTH: 1,000 Vrms min.@sea level.
OPERATING TEMPERATURE: -30°C to 85°C.
MATERIALS
CASE: Diallyl phthalate (DAP) (UL94v-0).
ACTUATOR: Nylon,black std.
BUSHING: Brass or Zinc,nickel plated.
HOUSING: Stainless Steel.
SWITCH SUPPORT: Brass,tin plated.
TERMINAL/CONTACT: Brass,with silver or gold .
SOLDERING PROCESSES
MANUAL SOLDERING: Use soldering iron of 30 watts, controlled at 350°C
approximay 5 seconds while applying solder.
WAVE SOLDERING: Recommended Soldering Temperature: 260 ± 5°C
Duration of Solder Immersion: Max 5 sec. (PCB is 1.6mm in thickness) http://www.yeswitch。。com