5YCF 超小型滑动开关PC安装式三段滑动开关

超小型滑动开关PC安装式三段滑动开关特色:可靠的跳板设计能确保長机械寿命,电压可到 3 Amps,端子点胶防水–底部可共合-可洗净.
应用范围：测试和测量设备,电脑及其周边电信和网通设备. 

超小型滑动开关PC安装式三段滑动开关功率：取决于触点材料
机械寿命：30,000次操作以上
接触电阻：在2-4VAC，100mA时，
镀银和镀金触点的Z大电阻为20毫欧
绝缘电阻：Z小1，000兆欧
绝缘强度：触点间Z低1,000VAC至少一分钟，
在触点与外壳之间Z低1,000VAC至少一分钟
工作温度范围：-30度85度
材质
外壳：苯二酸二烯丙酯树脂（UL94V-0）
框架：黄铜 镀锡
滑柄：尼龙，黑色
弹片：镀银或镀金
端子油封：铜合金，镀金或镀银

焊锡条件
手工焊：用烙铁30瓦，控制在350度，约5秒，同时应用焊料。
波峰焊：推荐焊接温度：260度正负5度
锡浸泡时间：Z多5秒。（PCB板的厚度为1.6mm）
焊接：波峰炉

CONTACT RATING: Dependent upon contact material.
MECHANICAL LIFE: 30,000 make-and-break cycles.
CONTACT RESISTANCE: 20 m??max. initial @ 2-4VDC
                    100mA for both silver and gold plated contacts.
INSULATION RESISTANCE: 1,000 M??min.
DIELECTRIC STRENGTH: 1,000 Vrms min.@sea level.
OPERATING TEMPERATURE: -30°C to 85°C.
MATERIALS
CASE: Diallyl phthalate (DAP) (UL94v-0).
HOUSING: Brass,tin plated.
ACTUATOR: Nylon,black std.
CONTACT: Brass,with silver or gold plated.
TERMINAL SEAL: Copper alloy,with silver and gold plated .

SOLDERING PROCESSES
MANUAL SOLDERING: Use soldering iron of 30 watts, controlled at 350°C
approximay 5 seconds while applying solder.
WAVE SOLDERING: Recommended Soldering Temperature: 260 ± 5°C
Duration of Solder Immersion: Max 5 sec. (PCB is 1.6mm in thickness)

http://www.yeswitch。。ｃｏｍ