卧式端吸离心泵 进口离心泵 德国进口离心泵Centrifugal pump
卧式端吸离心泵结构:
1、水泵采用为单级单吸离心泵,轴向进水,经向出水,泵壳地步与底座固定。
2、整体式泵轴,采用油脂润胡的导向深沟球轴承。
3、泵与电机之间采用半弹性联轴器相连。
4、标准型密封为长寿面、耐磨机械密封。
卧式端吸不锈钢离心泵特点:
1、采用后拉式结构,维修时无须拆除泵壳及管路。
2、所有泵型采用4种泵轴,极大地提高了零件的互换性,且轴采用火焰校直,消除轴内部应力,提高了轴封的寿命。
3、所有叶轮均经过二次切削,已满足客户的实际需要。
4、叶轮前后均有耐磨口环,方便水泵的维护,提高了泵壳和叶轮的寿命,对长时间维持水泵的GX率提供了保证。
5、可选配易拆卸联轴器,方便客户在不移动电机的情况下,对水泵进行维护。
水泵适用范围:
供水、供热、空调系统、增压供水、消防喷淋系统、喷洒、灌溉、游泳池、喷泉供水等、过滤净水系统
卧式端吸离心泵应用范围
工业系统
供水系统
冷却和空调系统
系统增压
消防、喷淋系统
卧式端吸离心泵技术参数
流量:3m3/h~800m3/h
扬程:4m~160m
功率:0.55kW~160kW
液体温度:-15℃~+110℃
频率:50Hz/60Hz
Horizontal end suction centrifugal pump structure:
1, the pump is a single-stage single suction centrifugal pump, axial water, through the water, the pump shell and the base fixed.
2, the whole type of pump shaft, the use of grease run Hu deep groove ball bearings.
3, the pump and the motor with semi elastic coupling.
4, standard seal for long life, wear-resistant mechanical seal.
Horizontal end suction stainless steel centrifugal pump:
1, the use of pull structure, maintenance without dismantling the pump casing and pipeline.
2, all types of pump with 4 pump shaft, greatly improve the interchangeability of parts, and the axis of the flame straightening, eliminating the shaft internal stress, improve the life of the shaft seal.
3, all impeller after two cutting, has to meet the actual needs of customers.
4, before and after the impeller wear ring, convenient maintenance of water pump, improve the pump casing and impeller life, for a long time to maintain the high efficiency of the pump provides a guarantee.
5, optional and easy to disassemble coupling, convenient for customers in the case of not moving the motor, the water pump maintenance.
Pump application:
Water supply, heating, air conditioning system, pressurized water supply, fire sprinkler system, spray, irrigation, swimming pool, fountain water supply, filtration water purification system
Horizontal end suction centrifugal pump
Industrial system
Water system
Cooling and air conditioning system
Pressurization system
Fire fighting and sprinkling system
Technical parameters of horizontal end suction centrifugal pump
Flow: 3m3/h ~ 800m3/h
Head: 4m ~ 160m
Power: 0.55kW ~ 160kW
Liquid temperature: -15 C ~ +110 C
Frequency: 50Hz/60Hz
Sales Hotline:
Service