进口滑片泵‖进口滑片管道泵‖进口油泵价格

滑片泵 进口滑片泵 德国进口滑片泵Sliding vane pump

滑片泵概述Product overview：
(1)、滑片泵是一种容积式泵。
(2)、滑片泵主要用于输送介质粘度10～200mm2s的润滑油，也适用于输送各种性质类似的化工产品，输送介质温度为0℃-120℃，该系列泵具备自吸能力。
(3)、用于输送介质粘度10～20000mm2s的润滑油，原油，化工、食品浆状液，也适用于输送各种性质类似介质。输送介质温度为0℃～200℃，该系列泵具备自吸能力。

滑片泵工作原理Working principle：
   德国巴赫滑片泵，其工作原理是滑片装在开槽的转子中，转子偏心的装在泵体内，转子转动时，滑片自转子内滑出，紧贴泵体表面滑动，转子、滑片、泵体所形成的腔体随转子的转动，其空间大小呈周期性的变化，腔体增大时，吸入介质，腔体变小时，排出介质，周而复始，完成介质的输送过程。

滑片泵性能特点Product features：
(1)、较强的自吸能力 用于抽吸地下罐时，提升高度可达7．5m。
(2)、GX率 泵内滑片受离心力、机械推力、液压力的联合作用，紧贴定子内曲线运动，从而使泵具有独特的GX率。
(3)、保持性能不变的自调滑片 滑片从转子槽中滑出，不断补充磨损，而不降低泵的性能。这与齿轮泵有本质的区别。
(4)、输送剪力敏感性液体的能力 液力滑片GX能的设计使泵在驱动时减少了滑片对流体的剪力及搅动，避免了因此而产生的流体性质的改变。
(5)、维修简单、方便 打开泵盖，提出旧滑片，插入新滑片。只需几分钟，您的泵就可以重新投入工作。日常检查同样容易。 

滑片泵优点Advantage：
 自吸滑片泵，采用带叶片的转子驱动液体。材质上采用球墨铸铁配合自润滑的叶片。因为其优良的性能，可以传输粘性的和挥发性的液体，相比同等的泵功率更低。 在低转速大流量的传输中更具优势。
快速、低噪音的长期使用；
叶片式结构使其性能稳定、无故障使用。
滑片泵具有以上优点，而且自吸能力强，寿命长，体积小，效率高。在输送汽油、柴油或者类似介质的情况下，滑片泵具有非常大的优势，是自吸式离心油泵和铜轮齿轮泵的替代品。
应用范围The scope of application：
油罐车
船舶加油
润滑油
航空燃油
石油化工、汽油、柴油、生物燃油、溶剂、农药等输送

滑片泵安装使用The installation and use of：
本泵广泛的用于流动或固定装置。在配合万向联轴器或液压马达时，该泵可以安装在任何油罐车上，也可以与电机或柴油发动机连接，按照在金属地板上，用在任何大流量加油机或者流动加油设备上。是铜轮齿轮泵的替代品。

Overview of sliding vane pump Product overview:
(1) sliding vane pump is a positive displacement pump.
(2), sliding vane pump is mainly used for conveying medium viscosity of 10 ~ 200mm2s of lubricating oil, also applies to the transmission of a variety of similar chemical products, the temperature of the transmission medium is -120 DEG C,, the pump has self-priming capacity.
(3), for the transmission medium viscosity of 10 ~ 20000mm2s of lubricating oil, crude oil, chemical, food slurry liquid, also applies to the transmission of various properties of similar media. The temperature of the conveying medium is 0 DEG C to 200 DEG C, and the pump has self-priming capability.
Sliding vane pump working principle Working principle:
The German Bach vane pump, the working principle of sliding piece in slotted rotor, the rotor is eccentrically arranged in the pump body, rotor, vane rotor from sliding out, close to the sliding surface, sliding vane pump, rotor cavity, the pump body is formed with the rotation of the rotor, the space is small is a periodic change, inhalation of medium cavity increases, the cavity becomes small, discharge medium, and complete the transfer process of medium.
Vane pump performance characteristics Product features:
(1), strong self-priming capacity for suction underground tank, lifting height up to 7.5m.
(2), the high efficiency pump sliding vane by centrifugal force, mechanical thrust, liquid pressure combined action, close to the stator curve movement, so that the pump has a unique high efficiency.
(3) the self regulating sliding vane sliding from the rotor slot keeps the performance unchanged, and it increases the wear and tear, and does not reduce the performance of the pump. This is essentially different from the gear pump.
(4) the ability to transfer the shear sensitive liquid to the design of the hydraulic vane is designed to reduce the shear force and agitation of the vane to the fluid while driving, thus avoiding the change of the fluid properties.
(5), the maintenance is simple and convenient to open the pump cover, put the old slide, insert a new slide. It takes only a few minutes to get your pump back to work. Daily check is equally easy.
Vane pump advantages Advantage:
Self suction sliding vane pump, driven by rotor with blades. The material is made of spheroidal graphite cast iron with self lubricating blades. Because of its excellent performance, it can transmit viscous and volatile liquids, which is lower than the same pump power. In the low speed and large flow of transmission more advantages.
Long term use of fast, low noise;
The blade type structure makes its performance stable and no trouble to use.
The sliding vane pump has the advantages of strong self-priming capacity, long service life, small volume and high efficiency. In the case of gasoline, diesel oil or similar media, vane pump has a very big advantage, is a self priming centrifugal pump and copper wheel gear pump alternatives.
Application range The scope of application:
Fuel tank car
Ship refueling
Lubricating oil
Aviation fuel
Petrochemical, gasoline, diesel, bio fuels, solvents, pesticides and other transportation
Sliding vane pump installation using The installation and use of:
This pump is widely used for flow or fixing device. In line with the universal coupling or hydraulic motor, the pump can be installed in any tank car, can also be connected with the electric motor or diesel engine, in accordance with the metal floor, used in any large flow or flow refueling refueling equipment. It is a substitute for copper wheel gear pump.

Sales Hotline:

Service