LA30RPDC
TechnicalProductData
Features
· Covers GPS L1, L2, L5, GLONASS andGalileofrequency bands
· Advanced PHEMT technology
· High gain
· Very LowNoise Figure
· Excellent 1dB compression, 3rdorder intercept
Description
The LA30RPDC is a one input, one output device with a nominal 30dBgain block. The frequency responsecovers Galileo, GLONASS and the L1, L2, L5GPS bands with excellent flatness. In the default configuration, the RF output (J1) passes DCfrom theconnected GPS receiver through the amplifier to the active antenna, allowing the GPS receiver to power both the antenna and theLA30RPDC amplifier.
ElectricalSpecifications,TA=25oC
Parameter | Conditions | Min | Typ | Max | Units |
Freq. Range | Antenna - J1 | 1.176 | | 1.575 | GHz |
In/Out Impedance | Ant, J1 | | 50 | | Ω |
Gain | Ant – J1 | 30 | 31 | 33 | dB |
Input VSWR | J1 - 50 Ω | | | 1.8:1 | |
Output VSWR | Ant –50Ω | | | 1.8:1 | |
Noise Figure | Ant – J1 | | 1.5 | | dB |
Gain Flatness | |L5 – L1|, Ant – J1 | | 1.8 | | dB |
Reverse Isolation | J1 – Ant | 50 | | | dB |
1dB Compression | Ant –J1 | 13 | | | dBm |
3rdOrder Intercept | Ant – J1, Referred to Output | 22 | | | dBm |
DC Input Voltage | DC Input on J1 | 2.8 | | 15 | Vdc |
DC Current(2) | Amplifier current draw, All ports 50Ω | | 48 | | mA |
AvailableOptions
Network Power Supply |
Source Voltage Options | VOLTAGE INPUT | STYLE |
110VAC | Transformer (Wall Mount) |
220VAC | Transformer (Wall Mount) |
240VAC (United Kingdom) | Transformer (Wall Mount) |
Customer Supplied DC 8 –32 VDC | Military Style Connector |
Output Voltage Options(1) | 2.8 to 15 VDC | 500mA Max. Current |
Pass/Block DC Options | |
Pass DC(1) | All Ports Pass DC |
DC Blocked(1) | Ant is DC blocked, Pass DC J1 |
RF Connector Options | CONNECTOR STYLE | COMMENTS |
Type N | No Charge |
Type SMA | No Charge |
Type TNC | No Charge |
Type BNC | No Charge |
(1) With Network Option, any RF port (input or output can be DC blocked or can
pass the network DC voltage.
PartNumber
NLA30RPDC-N/5/110
NetworkOption:
N=NetworkOption;Blank=NoNetwork
DCOptions:
DCB=Ant.DCBlocked;PDC=PassDC
ConnectorOptions:
N=Ntype;S=SMA;T=TNC;B=BNC
DCOutputVoltage:
3.3, 5,7.5,9,12,15,CXX(Custom:“XX”denotesthedesiredV) SourceVoltage:
110-Transformer,220–Transformer,240–Transformer,MC–MilitaryConn.(UsersuppliesDC Voltage)