标准砝码闵行 F1/F2/M1不锈钢砝码-砝码磁化率对质量测量过程的影...

标准砝码闵行 F1/F2/M1不锈钢砝码-砝码磁化率对质量测量过程的影响

成功之难如升天，覆坠之易如燎毛

中文名： 不锈钢
外文名： Stainless Steel
合金元素： 镍、钼、钛、铌、铜、氮等
主要分类： 马氏体钢、铁素体钢、奥氏体钢等
砝码材料磁化率：≤0.0006 磁化率≤0.01 磁化率≤0.05
砝码材料密度：8.00g/cm3 密度=7.94g/cm3 密度=7.85g/cm3
砝码极化强度: E1≤2.5μT E2≤8μT F1≤25μT
实润为您提供1mg-5t各类规格-各种等级-各种形状的砝码

摘要：

根据砝码磁性参数的测量原理,针对磁性测量中示值稳定性的影响量进行分析,提出影响砝码磁性参数测量中示值稳定性的关键影响量.采用Z大称量5.1 g、分辨率0.1μg的磁化率计进行砝码磁性测量,测量过程中分别同步测试振动的变化和环境磁场的变化,通过实验数据分析,验证了环境磁场的波动是影响砝码磁性测量的关键影响量.
Abstract：
According to the measurement principle of weight magnetic parameter, the influence of reading stability for measuring magnetism is analyzed, and the key influence of reading stability is presented in the measurement process. The magnetism of weight is measured by the magnetic susceptometer with capacity of 5.1 g and resolution of O. 1 μg. At the same time the change of environmental vibration in the laboratory and the fluctuating of ambient magnetic field are measured respectively. The experimental results show the fluctuating of ambient magnetic field that is the key influence of weight magnetism measurement.

标准砝码闵行 F1/F2/M1不锈钢砝码-砝码磁化率对质量测量过程的影响