EAB-120 台湾华仪EAB-120

EAB-120台湾华仪变频电源，台湾华仪EAB-120的技术特点：
EAB-120 Modular Programmable AC Power Source 0 - 300V / 40 - 1000Hz (2000VA)输出容量 : 1KVA - 6KVA
内建主动式输入功率因子改善线路 (PF ≥ 0.97)，且输入电压全范围 90 - 264V，符合CE认证
可多台电源并联或接成三相输出，满足客户容量扩充或三相输出的应用 (选配Linking Card)
全范围可调输出
电压及频率设定范围 (0 - 300V，40 -1000HZ)
大型的 240 X 64 Graphic LCD 显示器
在阻性负载下波形失真小于 1%
输出波峰因子比，于满电流的输出状态下可达 3 : 1
瞬时反应快，在瞬间加重载或除载时波形可于400ms内恢复
全范围输出电压的稳压率可达 0.5%
可程式 50 个记忆组；内含 9 测试步骤，记忆组及步骤可单独设定循环，记忆组间亦可连结测试以仿真各种负载的电源特性
可执行自动循环测试，Z高可执行 999900 次
针对被测物的寿命试验，可依需求设定以秒、分、时为测试执行时间单位
特殊的恒流装置，可轻易启动马达、压缩机等高启动电流之负载
高启动负载能力，浪涌电流可达额定电流的 4 倍，并可维持1000mS不切断保护
可设定当加载电流超过上限电流设定值时；维持设定值电流恒定输出 (反应时间 < 1400mSec)
选配远程遥控输入界面，可执行 Test / Reset 及 7 组记忆组 (M1 - M7) 快速输出
内建PLC遥控输出界面
输出过电流、短路、过电压、过功率、过温度及逆灌电流保护及警报
前面板输入软件校正
针对IEC61000 - 4 - 11标准的应用，可设定启始角，电压暂降 (Dips)，瞬断及电压变化
测试中可以透过飞梭旋纽 (Rotary Knob) 实时的调整显示中的电压 / 频率输出
可选购GPIB，及RS232 & USB界面
具有交流 (AC)、直流 (DC) 可程式输出模式，一台抵两台满足客户的测试应用
可量测电压、频率、电流 (RMS&Peak)、实功率、视在功率、虚功率、电流波峰及功率因子具有密码锁定，记忆组锁定，及键盘锁定功能 
EAB-120台湾华仪变频电源，台湾华仪EAB-120的附件选择：

Opt.612 PLC Remote I/P Interface
Opt.627 GPIB Interface Card
Opt.643 USB & RS232 PC Control Card
Opt.647 Ethernet Card
Opt.642 Parallel & Multiphase Linking Card

EAB-120台湾华仪变频电源，台湾华仪EAB-120的技术参数：EAB Modular Programmable AC Power Source

MODEL			EAB-110	EAB-120	EAB-140	EAB-160
INPUT
Phase			1Ø			1Ø or 3Ø
Voltage			100V - 240V±10%		200V - 240V±10%	1Ø / 3Ø3W： 200V - 240V±10% 3Ø4W： 346V - 416V±10%
Frequency			47 - 63Hz
Max. Current			15	30	30	1Ø：4 3Ø3W：26A 3Ø4W：1
Power Factor			0.97
AC OUTPUT
Max Power			1000VA	2000VA	4000VA	6000VA
Max Current 1Ø (r.m.s)*1	0-150V		9.2 A	18.4 A	36.8 A	55.2 A
	0-300V		4.6 A	9.2 A	18.4 A	27.6A
Inrush Current (peak)	0-150V		36.8A	73.6A	147.2A	220.8A
	0-300V		18.4A	36.8A	73.6A	110.4A
Phase			1Ø, (Linking Option 1Ø3W or 3Ø4W Poly-Phase)
Total Harmonic Distortion (THD)			<0.5% (Resistive Load) at 40.0 - 70.0Hz and output voltage within the 80 - 140Vac at  Low Range or the 160 - 280Vac at High Range <1% (Resistive Load) at 70.1 - 500Hz and output voltage within the 80 - 140Vac at  Low Range or the 160 - 280Vac at High Range <1% (Resistive Load) at 501 - 1000Hz and output voltage within the 100 - 140Vac  at Low Range or the 160 - 280Vac at High Range
Crest Factor			≧3
Line Regulation			± 0.1 V
Load Regulation			± (1% of output +1V) at Resistive Load
Response Time			< 400 µsec
SETTINGS
Voltage	Range		5 - 300V, 150 / 300V Auto Range
	Resolution		0.1V
	Accuracy		±(1% of setting + 2counts)	±(1% of setting + 5counts)
Frequency	Range		40 - 1000Hz Full Range Adjust
	Resolution		0.1Hz at 40.0 - 99.9Hz, 1Hz at 100 - 1000Hz
	Accuracy		±0.03% of setting
Starting & Ending Phase Angle	Range		0-359∘
	Resolution		1∘
	Accuracy		±1∘(45 - 65HZ)
DC OUTPUT
Max Power			1000W	2000W	4000W	6000W
Max Current	0-210V		4.8A	9.6A	19.2A	28.8A
	0-420V		2.4A	4.8A	9.6A	14.4A
Ripple & Noise (rms)	Range	L	< 500mV		< 700mV
		H	< 800mV		< 1100mV
Ripple & Noise (p-p)			< 3.0Vp-p		< 4.0Vp-p
SETTINGS
Voltage	Range		0 - 210V / 0 - 420V Selectable		0-210V / 0-420V Selectable >5V
	Resolution		0.1V
	Accuracy		± (1% of setting + 2 counts)		± (1% of setting + 5 counts)
Current Hi Limit (OC Fold=OFF) OC Fold Back (OC Fold = ON)	Range	L	0.01 - 4.80A	0.01 - 9.60A	0.10 - 19.20A	0.10 - 28.80A
		H	0.01 - 2.40A	0.01 - 4.80A	0.10 - 9.60A	0.10 - 14.40A
	Resolution		0.01 Amps
	Accuracy		± (2.0% of setting + 2counts)
MEASUREMENT
Voltage	Range		0 - 210V / 0 - 420V		0 - 210V / 0 - 420V Selectable >5V
	Resolution		0.1 V
	Accuracy		± (1% of reading + 2counts)		± (1% of reading + 5counts) > 5 V
Frequency	Range		0.0 - 1000 Hz
	Resolution		0.1 Hz
	Accuracy		±0.1Hz (501 - 1000Hz Accuracy ± 0.2Hz)
Current (AC & DC)	Range	L	0.005 A - 1.200 A	0.005 A - 2.400 A	-	-
		H	1.00 A - 13.00 A	2.00 A - 26.00 A	0.05 A - 52.00 A	0.05 A - 78.00 A
	Resolution	L	0.001A		-	-
		H	0.01A
	Accuracy	L	± (1% of reading + 5counts)
		H	± (1% of reading + 5 counts)
Current Peak	Range		0.0A - 38.0 A	0.0 A - 76.0 A	0.0 A - 152.0 A	0.0 A - 228.0A
	Resolution		0.1 A
	Accuracy		± (1% of reading + 5 counts)
Power (AC)	Range	L	0.0 W - 120 W	0.0 W - 240 W	-	-
		H	100 W - 1300 W	200 W - 2600 W	0 W - 5200 W	0 W - 7800 W
	Resolution	L	0.1W		-	-
		H	1W
	Accuracy	L	± (2% of reading + 15counts ) at PF > 0.2		-
		H	± (2% of reading + 5counts ) at PF > 0.2	± (2% of reading + 10counts ) at PF > 0.2
Power (DC)	Range	L	0.0 W - 120 W	0.0 W - 240 W	-	-
		H	100 W - 1300 W	200 W - 2600 W	0 W - 5200 W	0 W - 7800 W
	Resolution	L	0.1W		-	-
		H	1W
	Accuracy	L	± (2% of reading +5counts)
		H	± (2% of reading +5counts)
Power Apparent (VA)	Range	L	0.0VA - 120.0VA	0.0VA - 240.0VA	-	-
		H	100VA - 1300VA	200VA - 2600VA	0VA - 5200VA	0VA - 7800VA
	Resolution	L	0.1VA		-	-
		H	1VA
	Accuracy		V×A ,Calculated value
Power Resistive (Q)	Range	L	0.0VAR~120.0VAR	0.0VAR~240.0VAR	-	-
		H	0VAR~1300VAR	0VAR~2600VAR	0VAR~5200VAR	0VAR~7800VAR
	Resolution	L	0.1VAR		-	-
		H	1VAR
	Accuracy		,Calculated value
Power Factor	Range		0.000-1.000
	Resolution		0.001
	Accuracy		W/VA, Calculated and displayed to three significant digits
Crest Factor	Range		0 to 10.00
	Resolution		0.01
	Accuracy		Apeak / Arms, Calculated and displayed to two significant digits
GENERAL
Transient (only for 40 - 70Hz)			Trans-Volt：0.0 - 300.0V, Resolution： 0.1V Trans-Site：0.0 - 25.0mS, Resolution： 0.1mS Trans-Time：0.5 - 999.9mS, Resolution： 0.1mS Trans-Cycle：0 - 9999, 0-Constant
Inrush Current			4 times current rating
Enhanced Over Load Capacity			Over current 110% can hold for 1000 ms without protection
Operation Key Feature			Soft key, Numeric key, Rotary Knob
Remote Input Signal (Option)			Test, Reset, Recall program memory 1 through 7
Remote Output Signal			Pass, Fail, Test-in-Process
Calibration			Front Panel Calibration
Key Lock			Yes, Password Driven
Synch Output Signal			ON / Event / OFF, Output Signal 5V ,BNC type
Alarm Volume Setting			Range: 0 - 9; 0=OFF, 1 is softest volume, 9 is loudest volume
Graphic Display			240 x 64 dot resolution Monographic LCD / Contrast 9 Levels 1-9
Interface (Option)			Ethernet, USB / RS232, GPIB, Linking Card, PLC Remote Input Card
Protection Circuits			OCP, OVP, OPP, OTP, RCP (Over Current, Over Voltage, Over Power, Over Temp)
Fan			Temperature Control
Rear Output			Terminal Block (L,N, G, Ls, Ns)
Rack mount Handles			Yes
PFC			PF≥ 0.97 at Full load
Effieciency			≥75% (at Full load)		≥80% (at Full load)
Auto loop cycle			0=Continuous, OFF, 2~9999
Over Current Fold Back			On/Off , Setting On when output current over setting Hi-A value it will fold back output voltage to keep constant output current is setting Hi-A value
CE Mark			Yes
Parallel Output for 1Ø Output			Yes
Linking Output for 3Ø Output			Yes
Operation Environment			0 - 40ºC / 20 - 80% RH
Dimension, mm*2		W	430	430	430	430
		H	133.5 (148)	133.5 (148)	267 (281)	400.5 (473)
		D	530	530	530	530
Net Weight			20Kg	21Kg	40Kg	53Kg
*1 At working voltage 110V / 220V
*2 Figure in parentheses are maximum values				*product specifications are subject to change without notice.