闪蒸仪Vaporizer
此独立设备用于气化液化石油气样品。设计带有用户可调式加热器。一个单独的加热器用于对30”(约76.2厘米)长,内径为1/16”的样品管线进行保温,防止样品气化后重新凝结。This stand-alone unit vaporizes liquefied petroleum gas (LPG) samples. Designed with a user selectable heater. A separate heater maintains this temperature along a 30 in, 1/16” gas sample transfer line to prevent condensation after vaporization. 注:溶解了杂质的样品,若该杂质无法气化,那么可能会导致管路的阻塞。产品质保不包含此种情况下的管路维修工作。Note: Samples that contain dissolved components, which do not vaporize, may cause an obstruction in the vaporizer tube. The warranty does not cover the tube assembly under these circumstances.
系统需求System Requirements:
色谱仪需安装气体进样阀Gas sample valve on the gas chromatograph
可用的色谱仪外部连接端口Available external events port on the gas chromatograph
色谱仪上具备可用的阀组位置Available valve position on the gas chromatograph
Z低进样压力:300 psig(约20.7 barg)Minimum sample pressure: 300 psig
特点Specifications:
Z高气化温度:150℃ Max vaporizer temperature: 150°C
Z高液体进样压力:400 psig(约27.5 barg)*Max liquid sample input pressure: 400 psig*
Z高气体进样压力:100 psig (约6.9 barg)Max gas sample input pressure: 100 psig
Z高驱动气进气压力:65 psig (约4.5 barg)Max actuation gas input pressure: 65 psig
标气选择阀组能够很简易的安装到气象色谱分析仪上Selection valve for a gas calibration blend to be easily ported to the gas chromatograph
熔融石英内衬管线,用于硫类物质分析Fused silica lined tubing for sulfur analysis
Phone: (970) 221-9179 www.Wasson-ECE.com eric_kong@wasson-ece.com
*闪蒸仪可根据特殊要求进行定制,用于承受Z高1000 psig(约69.0 barg)的液体进样压力。Vaporizer can be special ordered to handle up to 1000 psig liquid sample input pressures.
尺寸:宽x深x高=10”x20”x8”(约20.3 x 50.8 x25.4厘米)Dimensions: 10”W x 8”H x 20”D
重量:约25磅(约11.3公斤)Weight: Approximay 25 lbs
Electrical: Instrument will be built to comply with individual country power requirements. 供电:设备在制造时会按照用户所在国家的电力要求设计符合标准的电源系统。