7401-0076 美国盖茨GATES笔式皮带张力计7401-0076

 宁波瑞德检测仪器有限公司
地 址：宁波庄桥新都路189号
邮 编：315200
：袁建华
电 话：
传 真：
手 机：

：
地址：www.ruide17.com   www.rd-17.com

宁波瑞德检测仪器有限公司专业美国盖茨GATES笔式皮带张力计7401-0076：
美国盖茨GATES笔式皮带张力计7401-0076
我公司长期供应美国GATES皮带张力计7401-0076,性能好,价格合理,配有中英文使用说明书，!

简单介绍
笔式皮带张力计美国GATES笔式皮带张力计 您知道正确的皮带张力计可延长皮带寿命20%-50%吗? Z快速,简便,精确的皮带张一3检测工具-笔式皮带张力计 适用于各种V型皮带,正时皮带的张力检测! 现货供应!
 

 笔式皮带张力计（美国GATES笔式皮带张力计）的详细介绍

美国GATES笔式皮带张力计

您知道正确的皮带张力计可延长皮带寿命20%-50%吗?

Z快速,简便,精确的皮带张一3检测工具-笔式皮带张力计

适用于各种V型皮带,正时皮带的张力检测!

HOW TO USE？

1. CAUTION:Before doing maintenance or tensioning on belt drives,turn equipment off and lock outthepowersource.Use guards on machinery when running.

Place amatchedsetof belts over the sheave grooves.Take up the slack untilthebeltsappear fairly taut.

2. With the drive stopped,measure the belt span lenth of yourdrive（seesketch）.Set the rubber O-ring on the body of the tensiongaugeat thedimension equal to 1/64 inch ×32,1/2 inch.

3. Set the O-ring on the plunger at 0 against the body ofthetensiongauge.

4. With the tension gauge perpendicular to the span,apply a forcetoabelt in the center of the span.Deflect the belt until bottomofthelarge O-ring is even with the top of the next belt,or thebottomofa straight edge laid across the top of

other belt（s）onthedrive.Release pressure and read pounds of force used atO-ringonplunger.

Note:When new belts are installed on a drive,the tension willdroprapidlyduring the first few hours.Thus,for new belts,tightentothe initialinstallation defection force shown in thetablesbelow.Check tensionfrequently during the first 24 hoursofoperation.Subsequentretensioning should fall between theminimumand maximum forces shownin the tables.

5. Compare the force required in step 4 with the ranges inthetablesbelow.

Tightenorloosenbelts to bring them into the recommened range.

Note:The proper tension for V-belt drive is the lowest tensionatwhichthe belts won’t slip under peak load condition ，深圳 ， 宁波  上海