如有任何问题请与我司业务专员:
:豪
:fuhao@17Lp.com
英国易高Elcometer1542十字切割附着力测量仪是一种简单有效的附着力测量方式,用于多种不同种类涂层,适用于平面上薄涂层的测试。根据待测涂层厚度不同,有三种不同间距的刀齿以供选择。
- 1mm间距--用于小于60μm涂层厚度
- 2mm间距--用于小于120μm涂层厚度
- 3mm间距--用于大于120μm涂层厚度
三种仪器可单独提供,也可与标准刷和放大器并置于工具箱内供货。
- 强大的十字切割功能,8个切削面。
- 阳极氧化处理的铝制把手,带一个轮子,稳定操作,适用于测试面板和薄涂层。
- 提供调节器,以便精确固定切削面。
Cross Hatch Method - Elcometer 107 & Elcometer 1542
The cross hatch test is a method to determine a coating adhesion.
Having selected the appropriate cutter spacing - dependant on coating thickness (see technical specifications), make a cut of approximay 20 - 30mm (1 - 1.5") long ensuring that enough force is used to cut all the way down to the substrate.
Make a similar length cut at a 90 degree angle with the first cut - again, ensure that the cut is all the way down to the substrate.
Brush the coating slightly with a soft brush or tissue to remove any detached flakes or ribbons of coating, then check the resulting cross-hatch pattern according to the Classification of Adhesion Test Results - as described in ISO or ASTM standards.
An adhesive tape, in accordance with ISO 2409 or ASTM D3359 can also be used prior to checking the result. Please refer to the appropriate standard. This tape is available from Elcometer.
Elcometer1542十字切割附着力测量仪
型号 | 型号 | 切割齿数 | 刀齿/槽间距 | 零件号 | 切割器 | 配置套装 | Elcometer 1542/1 | Elcometer 1542 十字切割测量仪 | 6 | 1mm | | K0001542M201 | Elcometer 1542/2 | Elcometer 1542 十字切割测量仪 | 6 | 2mm | | | Elcometer 1542/3 | Elcometer 1542 十字切割测量仪 | 6 | 3mm | | | Elcometer 1542/M204 | Elcometer 1542 完整配置套装 (附以上切割刀片各一片) | 6 | 1, 2 & 3mm | | 附件 | Elcometer 1542 十字切割刀片 | 6 | 1mm | | Elcometer 1542 十字切割刀片 | 6 | 2mm | KT001542P002 | Elcometer 1542 十字切割刀片 | 6 | 3mm | | Elcometer 1542 调节器 | | ASTM D3359 胶带, 2卷 | T1078894- | ASTM D3359 胶带, 1卷 | K0001542M001 | ISO 2409 胶带, 2卷 | T9999358- | ISO 2409 胶带, 1卷 | K0001542M002 | 十字切割 DIN 刷子 | KT001546N001 | 十字切割放大镜 | KT001546N002 | 装箱单 | Elcometer 1542: Elcometer 1542 十字切割器, 调节器(用于定位刀片), 六角扳手和说明书 | Elcometer 1542 配置套装 M201, M202, M203: Elcometer 1542 十字切割器, 调节器(用于定位刀片), 六角扳手, 刷子, 放大镜, 提箱和说明书 | Elcometer 1542 配置套装 M204: Elcometer 1542 十字切割器 6 x 1mm, 6 x 2mm 和 6 x 3mm, 调节器(用于定位刀片), 六角扳手, 刷子, 放大镜, 提箱和说明书 | |
Elcometer1542十字切割附着力测量仪
符合下列标准 |
ASTM D3359 | BS 3900 E6 |
DIN EN ISO NF 2409 | ECCA T-6 |
如何选择恰当的附着力测量仪:
十字切割方法: | 优点: | 快速,成本低,对比方法--见下表。 |
可能受到的限制: | 适用于一定厚度范围、平面涂层测量 |
适用范围: | 厚度至125μm(5mils)的油漆及粉末涂层测量。 |
| | |
拉拔附着方法 | 优点: | 使用简单,定量测量--给出确定的附着力值。 |
可能受到的限制: | 需要时间等待黏合剂干燥。 |
适用范围: | 实验室或户外用--平整或弯曲表面。 |
| | |
推进附着方法 | 优点: | 黏合剂干燥速度快,是测量弯曲表面的理想工具。 |
可能受到的限制: | 仪器推出圆形锻膜的力过大,会损坏较薄的基体表面。 |
适用范围: | 管道和金属喷射涂层。 |