KEYENCE光纤放大器/日本基恩士放大器
Supply power supply 12 to 24VDC ± 10%
Ambient Illumination Incandescent: Max 10,000lux Daylight: Max 20,000lux
Ambient temperature -10 ° C to 55 ° C (14 to 131 ° F) without condensation
Relative humidity of 35 to 85%, no condensation
1. FS-V10 has no output line, and FS-RO must be used for output.
2. The reaction time is changed according to the number of connections of the extension device.
3. FS-V1 has two output ports.
4. If several units are connected at the same time, allow the ambient temperature to change with the following conditions.
To connect several units, be sure to secure the unit to the DIN rail
(metal DIN rail). Make sure the output current is up to 20mA.
With 3 to 10 units: -10 to + 50 ° C14 to 122 ° F),
Connect 11 to 16 devices: -10 to + 45 ° C (14 to 113 ° F)
KEYENCE光纤放大器/日本基恩士放大器
反应时间 250μs (FINE模式)/500μs (TURBO模式)/1ms (SUPER TURBO模式) 410μs到1.7ms (2) 250μs
工作模式 入光开启/遮光开启(可选开关)
计时器功能 延迟关闭:40ms/10ms,定时器关闭(可选开关) 延迟开启:40ms,延迟关闭:40ms,定时器关闭(可选开关)
控制输出 NPN或PNP Z大100mA (40V),剩余电压:Z大1V(3)
供给电源 12到24VDC±10%
环境照度 白炽灯:Z大10,000lux 日光:Z大20,000lux
环境温度 -10°C到55°C (14到131°F),无冷凝
相对湿度 35到85%,无冷凝
1. FS-V10没有输出线,而FS-RO必须用於输出。
2. 反应时间根据扩展装置的连线数而变更。
3. FS-V1有两个输出口。
4. 如果同时连接若干个单元,允许环境温度随以下条件改变。
要连接若干个单元,务必把装置固定在DIN轨道
相关产品
·光纤放大器FS-V11,FS-V12,FS-V1,FS-V1P
·光纤放大器FS-V21R,FS-V21RP,FS-V21G,FS-V22R
·光纤放大器FS-V31,FS-V31P,FS-V31C,FS-V33
KEYENCE光纤放大器/日本基恩士放大器