触屏版流控仪/微流控精密压力进样泵Microfluidic Pressure/Flow Controller with Internal Pressure/Vacuum Pump_详细资料

产品信息

货号： PG-MFC 供应商：苏州锐讯生物科技有限公司现货状态： 2个月保修期： 1年

Our PreciGenome microfluidic pressure/flow control system PG-MFC controller provides pulse-free precise positive and negative pressure.
Stable constant flow rates can be set and controlled when used in conjunction with external liquid flow sensors. The microfluidic pressure controller operates in a wide range (-7psi to 30psi) with fast response time and accuracy.
The pressure controller software provides user-friendly interface with an integrated touch screen. No external computer is needed even for complicated process configuration.

System Benefits:

Compact and portable design

Precise and accurate pressure/flow output

Fast response time

Controllable flow rate output with flow sensors

Controlled sample volume injection with liquid flow rate sensor

Luer lock standard connection. Easy connect to our reservoirs kit

No external pressure source required (can be connected to an external pressure source for higher pressure)

No external computer required

OEM service and module integration available

Compatible with our PG high-speed imaging system

Integrated Software:

Simple and advanced work modes meet all your needs

Integrated touch screen with intuitive GUI

Plug & play

One-click to run the experiment

Easy setup for complex timing control with IO ports, digital trigger, external valves, cameras, liquid flow sensors

Compatible with our selector / rotary valves, high-speed imaging system, and other accessories

System Contents:

PG-MFC controller, 1 PC

Power supply 110/220V, 1 PC

Microfluidic Luer Lock Fittings Kit for Pressure Controller Connection, 2 sets

Liquid flow rate sensor (optional)

Microfluidic reservoir kit, 1.5/2ml,15ml, 50ml, 100/200ml (optional)

Microfluidic reservoir connectors, up to 230ul, 30/pack (optional)

System Specifications:

Pressure sensor accuracy of ±025 %FSS BFSL (Full-Scale Span Best Fit Straight Line), sensor resolution: 0.0061 %

Pressure stability: 0.05 %

Flow rate repeatability: below 1% of the measured value

Highest sensitivity down to <1 µl/min

Maximum flow rate for water-based liquids: 10 ml/min;

Maximum flow rate for hydrocarbons: 80 ml/min

Typical Setup Examples of PreciGenome Pressure Controller

1. Reagents are loaded in microfluidic reservoir tubes.
There are two ports available on the reservoir cap. One is the Luer lock connector which connects pressure source from the PreciGenome microfluidic controller. The other port is for reagent tubing, one side of which dips into the reagent and the other side of which connects to the inlet of a microfluidic chip.
The gas tubing connects the reagent reservoir and the pressure controller integrated pressure pumps inside. The reagent tubing connects the reagent reservoir and the microfluidic chip.
Users need to make sure the connection and fittings are airtight.
2. Set up the pressure controller properly for your experiment. Start running the controller by simply clicking the run button on the touch screen.

When the controller provides positive pressure, reagents in tubes are pushed to flow through reagent tubings into microfluidic channels and then flow out to the waste.

Complex Setup Example of 28 Reagents Selection and Delivery System

The system consists of one PG-MFC controller, three rotary/select valves, one flow sensor, one microfluidic chip stage with a temperature control unit, one unit (bubble trap), and several reagent reservoirs.
The entire system is controlled either directly the GUI on PG-MFC controller, or by python scripts through the serial port on the PG-MFC controller.
Up to 10 samples/reagents can be connected to one rotary valve. In the schematics below, three rotary valves are connected in series. Up to 28 reagents can be randomly selected to flow into a microfluidic chip.
A flow sensor is connected between the microfluidic chip and the third rotary valve. The flow rate is monitored by the flow sensor. Users can set flow rates and PG-MFC controller is capable of controlling the flow rate through the feedback loop.
Sample selection is controlled by rotary valve switching.
The microfluidic chip is fixed on a stage with the temperature control unit, which can be controlled by PG-MFC controller as well. Users can set the desired flow rate, injection volume of a specific sample, desired temperature through the GUI on the PreciGenome microfluidic controller.

Applications:

Droplets generation and applications (ddPCR, single cell encapsulation, NGS target sample enrichment, RNA Seq, etc.）

Organic /polymer syntheses

Drug transportation

Automatic reagent distribution

Cell culture and cell perfusion

Sequential injection of reagents with controlled volume

Organs on a chip

Instrumentation for point of care testing

Nanoparticle syntheses, such as liposome synthesis

Other microfluidics applications to manipulate fluids

您可能感兴趣的产品

触屏版流控仪/微流控精密压力进样泵Microfluidic Pressure/Flow Controller with Internal Pressure/Vacuum Pump

产品信息

联系我们

关注我们