- 伊顿威格士压力控制阀/供应VICKERS压力控制阀

伊顿威格士压力控制阀/供应VICKERS压力控制阀

所需的电气输入仅仅是电源 (24V)和电压

为 ±10V 的指令信号。放大器安装在牢固

的金属罩内，并密封起来以防止进水或其

他油液。电气连接通过标准的 7 针插头实现。

阀芯位置检测器引脚使得能够从电气上检

测阀的状态。如果需要的话，斜坡函数可以在外部生成。

The required electrical input is only the power supply (24V) and the voltage

A command signal of ± 10V. The amplifier is mounted firmly

Of the metal hood, and sealed to prevent water or its

His oil. The electrical connection is achieved via a standard 7-pin plug.

The spool position detector pin makes it possible to check from the electrical

The state of the valve. If necessary, the ramp function can be generated externally.

Features and advantages



伊顿威格士压力控制阀/供应VICKERS压力控制阀

特征和优点

工厂调整后加封以提高阀与阀之间的重复性。

减少和简化了安装接线。

标准的 7 针接头。

标准的直流 24V 电源有很宽的允差带。

标准的直流 ±10V 指令信号。

阀和内装放大器作为一个性能经过测试

的组件来选择、订货和交货。

阀芯位置检测器引脚有助于故障诊断。

The factory is adjusted to seal to improve the repeatability between the valve and the valve.

Reduced and simplified installation wiring.

Standard 7-pin connector.

The standard DC 24V power supply has a wide tolerance zone.

Standard DC ± 10V command signal.

The valve and built-in amplifier are tested as a performance

Of the components to choose, order and delivery.

The spool position detector pin assists in fault diagnosis.

Maintenance of the valve when the demolition and replacement (plug and play).

伊顿威格士压力控制阀/供应VICKERS压力控制阀