Sensor |
Texas Instruments TC247SPD-B0 |
Sensor Type |
1/2” frame Interline Transfer (FIT) Impactron |
Active Pixel |
658 x 496 |
Pixel Size |
10μm x 10μm |
Active Area |
6.58mm x 4.96mm |
Dynamic Range |
55dB |
Spectral response |
350-1100nm |
Minimum Illumination |
< 200μlux |
Resolution |
450 TV lines |
Cooling |
Active, no fan |
Antiblooming protection |
Yes (>500:1) |
Analogue |
Digital |
Output Format |
1.0Vp-p, 75Ω, CCIR or EIA |
12 bit Cameralink (base configuration) |
Exposure time |
500μs to 1/50s (CCIR) or 1/60 (EIA) |
500μs to 1/frame rate |
frame rate |
25Hz (CCIR), 30Hz (EIA) |
25Hz, 29.97Hz or 30Hz |
Iris control |
Autosensing, Video or DC |
N/A |
Synchronisation |
N/A |
Trigger In and OUT - TTL compatible |
Functions controlled by serial communication |
N/A |
Exposure, EM GAin, Hot Pixel Correction, Gamma, Intelligent AGC) |
Total power consomption |
< 4.5W |
< 5W |
Video connector |
SMA type |
Cameralink |
Power connector |
MDM type |
Hirose part code HR10A-7R-4PB |
Readout Mode |
Progressive Scan |
Lens Mount |
C/CS mount, Back focus capability |
Power Supply |
12V DC ±10% |
Operating case temperature1 |
-20°C to +55°C |
Storage Temperature |
-30°C to +85°C |
Dimensions |
43mm x 43mm x 57mm (including CS-mount) |
Weight (no lens) |
< 150g |
| | | |