ZY6017F 建筑材料可燃性试验机

ZY6017F建筑材料可燃性试验机
 Building materials flammability testing machine
1. 适用范围：Scope of application:
适用于在规定条件下判断建筑材料是否具有可燃性试验方法。
Apply to under prescribed conditions to determine whether a building material with flammability test method.
2. 符合标准：Conform to the standard:
 GB/T8626《建筑材料可燃性试验方法》。
 GB/T8626 building materials flammability test method.
3. 主要参数：The main parameters:
整套配置：本试验机由控制箱、燃烧箱本体、燃烧器、电磁阀、高压点火器、信号控制线及试样支架 组成；
电源电压：AC220V±10%，50Hz；
气体纯度：>95%   丙烷气；（客户自备）
放焰时间： 0 ~ 99 分 99 秒可设定；
持燃时间： 0 ~ 99 分 99 秒可设定；
燃烧器尺寸为： 燃烧器由孔径为￠0.17mm 的喷嘴和调节阀组成， 并设有四个￠4mm 的空气吸入孔；
火焰高度：20±2mm；
燃烧器倾角：45°；
点火系统：高压电子点火，自动点火、复位；
A complete set of configuration: this machine is composed of control box, box body, burning burner, 
electromagnetic valve, high pressure ignition, signal line and sample holder;
The power supply voltage: AC220V plus or minus 10%, 50 hz;
: gas purity > 95% propane gas; () by advertisers
Time to put a flame: 0 ~ 99 99 seconds can be set;
The burning time: 0 ~ 99 99 seconds can be set;
Burner size for: burner by the aperture of ￠0.17 mm of nozzle and regulating valve, and is equipped with four 
￠air inlet hole of 4 mm;
Flame height: 20 plus or minus 2 mm;
Burner Angle: 45 °;
The ignition system: high pressure electronic ignition, automatic ignition and reset; 
4. 设备结构：Equipment structure:
本机器结构由燃烧箱、控制箱，两部份组成。
燃烧箱尺寸：L700*W400*H810（mm）
机箱材质：燃烧箱体采用优质(t=1.2mm)304不钢板，数控机床加工成型，圆弧造型美观大方。
控制箱采用优质(t=1.2mm)静电钢板，表面进行喷塑处理，更显光洁、美观。
喷灯：由我公司自制，黄铜材料，完全符合GB/T8626标准要求。
其它机械零件材质采用304不锈钢或A3料加厚电镀，防腐防锈。
采用板卡+微机控制，具有结构合理、性能稳定、操作简便等优点。
WINDOWS XP操作界面、LabVIEW风格、完善的安全机制。测试期间实时显示测量结果并动态地绘出曲线，数据可以保
存、调阅和打印输出,可直接打印报表。
This machine structure is controlled by burning box, box, composed of two parts.
Combustion box size: W400 L700 * * H810 (mm)
Case material: combustion box body is made of high quality (t = 1.2 mm) 304 steel plate, the numerical control 
machine tool processing molding, arc the beauty is generous.
Control box is made of high quality (t = 1.2 mm) electrostatic steel plate, surface coating processing, more 
bright and clean and beautiful.
Blowtorch: made by my company, brass material, completely conform to the requirements of the standard 
GB/T8626.
Materials using 304 stainless steel or other mechanical parts A3 material thickening plating, anticorrosion.
Board + microcomputer control, has the advantages of reasonable structure, stable performance, easy to 
operate.
WINDOWS XP operating interface, LabVIEW style, perfect security mechanism. During testing real-time display 
measurement results and dynamically draw perfect curve, the data can be stored permanently and read and print 
output, can be directly printed statements.