ZY6014B单根电线电缆垂直燃烧试验机测试仪装置
Single cable vertical combustion tester tester device
本机适用于各种电线电缆绝缘被 覆材料PE、PVC、SRPVC之耐燃性试验。试验时,根据试验标准制作。
The machine is suitable for all kinds of wire and cable insulation is cladding material, PVC, PE SRPVC flame
resistance of the test. According to the test, test standard.
一、用途与组成Usage and composition
1、本设备适用于在规定火源直接燃烧下测定电线的不延燃性能。
2、该设备由控制箱,垂直空气箱,通风柜、燃烧喷嘴、电磁阀、高压点火器、电线试样夹具、煤所管、气体源、内外火焰调
节装置、信号控制线组成。本机整个过程都采用全自动,如:电子点火,燃烧时间、燃烧次数都可自动完成。
3、控制箱
1.燃烧次数计数哭喊 是用于预置燃烧次数,红色按(REST)
2.燃烧时间,延燃时间是采用时间控制,可根据需要设定时间,也可手动控制时间
3.电源开关是控制箱整体电源开关。
4.转换开关在使用时,可根据实际需要选用手动或自动,当在手动状态时,须用秒表另外计时,到达试验时间后按下复位
开关停火。
1, this equipment is suitable for the prescribed fire burning directly to don't delay burning performance of
wire.
2, the device by the control box, vertical air box, fume hood, combustion nozzles, solenoid valve, high
voltage ignition, wire sample clamp, tube by coal, gas source, inside and outside the flame
Section of device, signal line. This machine is the whole process is fully automatic, such as: electronic
ignition, burning time, burning times can be done automatically.
3, control box,
1. The number of counts crying is used to preset combustion, red according to the (REST)
2. Burning time, delay time is the time control, can be set according to need time, also can be manual control
time
3. The power switch control box is the overall power switch.
4. When the switch is in use, can choose according to actual need manually or automatically, when in manual
state, must be demonstrated with a stopwatch and timing, press reset after reach the test of time
Switch the cease-fire.
二、设备的技术性能The technical performance of the equipment
1、技术指标全部达到标准规定。
2、燃烧所体采用高纯度液化石油气体。
3、喷管内径:12MM
4、金属罩宽300+-25MM,进深450+-25MM,高度1200+-25MM
5、垂直燃烧被试验电线电缆长充:600+-25MM
1, the technical indicators all meet requirements in the standard.
2, the burning body USES the high purity of liquefied petroleum gas.
3, nozzle inside diameter: 12 mm
4, metal cover 300 + 25 mm wide, depth 450 + - 25 mm, height 1200 + - 25 mm
5, vertical combustion was test wire and cable length: 600 + - 25 mm