ZY6014A VW-1大型燃烧试验机
Large combustion testing machine
一、符合标准Conform to the standard
此大型燃烧柜是严格按照UL1581 sect 1080.1~1080.14标准生产,并得到广州美华UL公司的认可,完全符合VW-1 (V-ertical-specimen)Flame Test燃烧试验标准。
The large combustion ark is strictly according to UL1581 sect 1080.1 ~ 1080.14 standard production, and get the
guangzhou meihua UL approval, completely accord with VW - 1 (V - ertical - specimen) Flame Test fire Test
standards.
二、适用范围:Scope of application
适用于UL1581.UL13.UL444.UL1655之VW-1以及CSA之FT-1、FT-2。经济适用并大量被电线电缆行业广为使用。
Apply to UL1581. UL13. UL444. UL1655 VW - 1 and CSA, FT - 2 FT - 1. Economy is applicable and has been widely used
wire and cable industry.
二、详细参数For detailed parameters
整个试验在一个体积为4.32立方米密封的试验室进行。
试验方法:调节好火焰高度,将火焰顶端置于试件下,燃烧15秒,熄灭15秒,重复5次后检查试件被焚情形,可设定燃烧,熄灭时间及重复
次数,并可自动操作。
整个试验在一个体积为4.32立方米密封的试验室进行。
试验方法:调节好火焰高度,将火焰顶端置于试件下,燃烧15秒,熄灭15秒,重复5次后检查试件被焚情形,可设定燃烧,熄灭时间及重复
次数,并可自动操作。
The whole test in a volume of 4.32 cubic meters sealed laboratory.
Test method: adjust good flame height, flame at the top in the specimen 15 seconds, burning out 15 seconds, repeat
5 times after examining the specimen was burning, burning can be set, and extinguished repetitions, and automatic
operation.
燃烧室 The combustion chamber
1.有效空间:2.4m(长)*1m(宽)*1.8m(高)
2.外形尺寸:2.4m(长)*1m(宽)*2.5m(高)
3.材质:A外部:方钢框架结构,加厚1.5mm钢板静电烤深绿色漆;B内部:静电烤黑色漆。
4.观察窗:A.左右推拉式窗二个; B.观察视窗为钢化玻璃; C.周围用SUS304不锈钢包边; D.尺寸:730mm(高)*420mm(宽)。
5.操作窗口:4个A.内空尺寸:ф150mm; B.外围:为3.0mm不锈钢包边;C.密封为长臂皮手套,长度为:600mm; D.总外围尺寸:
ф220mm。
6.排风系统:A.螺旋式排风扇二个; B.密封推拉板为2.0mm为不锈钢; C.两边设有滑动槽;D.遥控操作装置一组:a. 采用钢拉绳
式两条 b. 滑轮两组
7.进风口:4个 A.尺寸:ф160mm; B.密封推拉板为2.0mm不锈钢板;C两边设有滑动槽。
8.底部固定架: A.尺寸:2.4m(长)*1m(宽)*0.7m(高);B采用60mm*60mm*4mm角铁,静电烤深绿色漆;C.脚滑轮:六个其中带
锁滑轮4个。
9.照明设备:采用防雾防烟圆形灯一个
1. Effective space: 2.4 m (length) * 1 m * 1.8 m (width) (high)
2. The overall size: 2.4 m (length) * 1 m * 2.5 m (width) (high)
3. Material: A external: square steel frame structure, with thick 1.5 mm steel plate electrostatic roast dark green
paint, B: internal static baked black paint.
4. The observation window: a. push-pull type window around two; B. observation Windows for toughened glass; C. use
SUS304 stainless steel package around the edge; D. size: 730 mm * 420 mm (high) (wide).
5. Operating window: four a. inside empty size: ф 150 mm; B. the periphery: 3.0 mm stainless steel package edge;
C. seal for long arm leather gloves, length: 600 mm; D. the total peripheral size: ф 220 mm.
6. Exhaust system: a. two spiral fan; B. seal push-pull plate is 2.0 mm stainless steel; C. both sides has a
sliding groove; D. a set of remote control device: a. the steel cable pull two b. pulley in the two groups
7. Air inlet: 4 a. size: ф 160 mm; B. seal push-pull plate is 2.0 mm stainless steel plate; C has a sliding groove
on both sides.
8. At the bottom of the fixed frame: a. size: 2.4 m (length) * 1 m * 0.7 m (width) (high); B by 60 mm * 60 mm * 4
mm Angle, electrostatic roast dark green paint, C. feet pulley: six of belt pulley four lock.
9. Lighting: the anti-fog smoke a circular lamp
控制部分 The control part
1.燃烧指示1个
2.燃烧设定:0-99.99秒任意设定
3.停燃指示1个
4.停燃设定:0-99.99秒任意设定
5.燃烧计数:0-999999次任意设定
6.具有全自动、燃烧、停燃、计数功能
7.具有垂直 / 水平转换功能
8.具有自动点火功能
9.具有手动 / 自动转换功能
10.点火为高压打火方式
11.试验部分与控制连接,采用航空插头,接触非常紧密
1 1. Burning instructions
2. Set to burn: 0-99.99 seconds set arbitrary
3. Stop burning show one
4. Stop burning set: 0-99.99 seconds set arbitrary
5. Burning count: 0-999999 set arbitrary
6. With a fully automatic, burning, burning, counting function
7. With vertical/horizontal transformation function
8. With functions of automatic ignition
9. With manual/automatic conversion function
10. For high voltage spark ignition way
11. Test part and the control connection, use the aviation plug, very close contact
试验部分 Test part
1.喷嘴:角度为20度
2.内焰调节阀1个
3.外焰调节阀1个
4.内焰接触点标示尺1个
5.低旗标示尺1个
6.试验长度尺1把
7.火焰量测器1个
8.试验固定架:a.材质:钢板经细加工后烤漆 b.颜色:纯黑色
9.试验盒为SUS304不锈钢经细加工而成
10.试验架底部: a.2.0mm钢板两块 b.尺寸:700mm(长)×450mm(宽) c.颜色:为静电烤黑色漆
11.垂直和水平试验独立设计
12.试验盒另加长臂推杆
13.水平燃烧标志为3个
1. The nozzle: Angle of 20 degrees
2. One inner flame regulator
3. One outer flame regulator
4. Labeling feet 1 inner flame contact
5. Low flag labeled '1 a
6. The test length scale 1
7. The flame measurement one
8. The fixed frame: a. material: steel plate after the lacquer that bake b. after fine processing color: black
9. Test box of SUS304 stainless steel by the fine processing and into
10. At the bottom of the test frame: a. 2.0 mm steel plate two pieces of b. size: 700 mm (length) x 450 mm (wide)
c. Color: black paint for electrostatic roast
11. The vertical and horizontal test design independently
12. Test box of the extended arm putter
13. Horizontal burning flag is 3
气源控制:Source control:
1.燃气:自备,建议用甲烷
2.流量计:1个(美国Dwyer VA20430型)
3.U型管压力计:1个(美国Dwyer公司 1230-36型)
4.气体三通接头一个
5.气管:为高压气管
Gas: 1. Bring your own, it is recommended that the use of methane
2 meter: 1 (American Dwyer VA20430 type)
3. The U tube manometer: 1 (1230-36 Dwyer companies in the United States)
4. A gas tee joint
5. The trachea: for high pressure air passages