ZY6242A 建筑材料或制品的单体燃烧试验机（SBI）
Building materials or products of single machine
一、适用范围：Scope of application:
用以确定建筑材料或制品（不包括铺地材料以及2000/147/EC号《EC决议》中指出的制品）在单体燃烧试验（SBI）中的对 火反应性能的方法。
Used to determine the construction materials or products (not including floor materials and 2000/147 / EC pointed out in the EC resolution products) in the monomer combustion test (SBI)
The performance of fire reaction.
二、符合标准：
GB/T 20284标准要求《建筑材料或制品的单体燃烧试验》以及EN13823《单体燃烧试验方法（SBI）》
Standard of GB/T 20284 "building materials or products of single combustion test" and EN13823 combustion test method of the monomer (SBI)"
三、主要性能参数：The main performance parameters:
试验设备包括燃烧试验室、控制室、小推车、排烟管、数据收集分析装置、燃气供应控制装置。
1、燃烧试验室：L3000*W3000*H2400(MM),房间顶部有连接取样管道的集气罩和排烟管道，小推车下方有空气自然进出的空间。试验过程中样品的燃烧释放热量和燃烧生成物都要从排烟管道中排出。用砖墙砌成。
2、点火源，置于小推车上垂直角落里的31KW的丙烷直角沙盒燃烧器（边长为250MM高为80MM）。
3、在排烟管道中设置有综合取样区用于放置传感器和取样管。
4、排烟速度：0.50立方米/S～0.65立方米/S。
5、试验室内环境温度测量：直径为1MM的K型铠装热电偶，环境压力测试：±200Pa。
6、排烟道温度测量：直径为0.5的进口K型铠装热电偶。
7、测温精度：0.5℃。
8、排烟道高精度压力传感器，精度±2Pa
9、时间记录系统精度：0.1S。
10、测试时间：1～30分钟可设。
11、烟密度测量系统，可测量试验过程中的烟密度。
12、气体分析仪以及关键部件均为原装进口。
13、带嵌入式电脑和8.4寸液晶显示，带TCP/IP和RS-232多种通讯接口选择
14、氧气测量：
Test equipment including combustion, control room, trolley, exhaust pipe, the data collection analysis device, gas control device.
1, combustion laboratory: W3000 L3000 * * H2400 (MM), the room at the top of the sampling pipe connection gas-collecting hood and exhaust pipes, trolley has natural air in and out of the space below. Test samples in the process of combustion heat and combustion products are out of the exhaust pipes. Built with brick wall.
2, ignition source, on a trolley vertical rectangular box in the corner of the 31 kw propane burner (high side length is 250 mm to 80 mm).
3, set in the exhaust pipe have comprehensive sampling area for placing sensors and sampling tube.
4, the exhaust speed: 0.50 m3 / S ~ 0.65 m3 / S.
5, test indoor environment temperature measurement: 1 mm diameter of K type sheathed thermocouples, environmental stress test: + 200 pa.
6, platoon flue temperature measurement: the diameter of 0.5 K type armoured thermocouple imports.
7, temperature measurement precision: 0.5 ℃.
8, high precision pressure sensor, smoke evacuation and precision of plus or minus 2 pa
9, the precision of time recording system: 0.1 S.
10, test time: 1 ~ 30 minutes.
11 and the smoke density measurement system, to test the smoke density in the process of measurement.
12, gas analyzer, and key components are imported.
13, with embedded computer and 8.4 -inch LCD display, with TCP/IP and a variety of communication interface RS - 232 option
14, oxygen measurement:
沪公网安备 31011502008050号
