SUNX微型光电传感器,日本神视光电传感器
使用环境湿度 35~85%RH,存储时:5~95%RH(注5)
使用环境照明度 荧光灯光
无指定时的测量条件为使用环境温度=+23℃。
(注2):是指将检测物体沿着H型的
水平方向进行移动时的数值。
(注3):是指将检测物体沿着H型的
双振幅1.5mm X,Y和Z方向各2小时
耐冲击 加速度 15,000m/s2
(约1,500G) X,Y和Z方向各3次
投光元件 红外线LED
(Cast light peak wavelength: 940nm, non-modulation type)
Withstand voltage AC1,000V 1 minute
All power connections between terminals and housing
Insulation resistance All power connections
Between the terminal and the shell, 50MΩ or more, based on DC250V high impedance table
Vibration resistance frequency of 10 ~ 2,000Hz>
(Reaction frequency 1 kHz or more) (Note 4)
Working status indicator orange LED (lights up)
Material Housing: PBT, slit through mask: polycarbonate
Can use the ambient temperature -25 ~ +55 ℃
(Note that no condensation, icing), storage: -30 ~ +80 ℃
Smooth surface illumination of 1,000lx or less
Cable extension 0.3mm2 above the length of the cable can be wired to 100m (Note
SUNX微型光电传感器,日本神视光电传感器
(投光波峰波长:940nm、非调制式)
耐电压 AC1,000V 1分钟
所有电源连接端子与外壳之间
绝缘电阻 所有电源连接
端子与外壳之间,50MΩ以上,基于DC250V的高阻表
耐振动 频率10~2,000Hz>
(反应频率1kHz以上)(注4)
工作状态指示灯 橙色LED(入光时亮起)
材质 外壳:PBT、狭缝透光罩:聚碳酸酯
能 使用环境温度 -25~+55℃
(注意不可结露、结冰),存储时:-30~+80℃
受光面照明度1,000lx以下
电缆延长 0.3mm2以上的电缆全长可配线至100m(注
SUNX微型光电传感器,日本神视光电传感器