- KEYENCE流量传感器,日本KEYENCE流量传感器

KEYENCE流量传感器,日本KEYENCE流量传感器
 3 can be used within the display range and rated flow range.
Name last with "A" model
There are also other features such as displaying averages and so on.
Also has the temperature along the points of the fiber
*8 在20 到30 L/min范围内
精度为F.S. 的±7.5%，
响应时间为1s 时重复精度为F.S. 的±5%。
分布式光纤温度传感系统不仅
Response time is repeated for 0.5 s
* 4 If 0.05 L / min is selected, the instantaneous flow rate
* 2 The rated flow range indicates the flow range normally used
*3 可在显示范围和额定流量范围内使用。
名称后带“A” 的型号
还具有一些其它功能，如显示平均值等。
响应时间为0.5 s 时重复
*4 若选定0.05 L/min，瞬时流量
*2 额定流量范围表示通常情况下使用的流量范围
KEYENCE流量传感器,日本KEYENCE流量传感器
Distributed sensing ability to take advantage of this feature
The display can be in increments of 0.15 in 0.15
0.5 L / min between the set, and the right
超过0.5 L/min 的值按0.01 增量设定。
*6 报警输出Z大为20 mA。
*7 小于Z小流量的流量值均显示为0 L/min。
*5 FD-M5CAT (P)/Y (P) 在
Values greater than 0.5 L / min are set in increments of 0.01.
* 6 The alarm output is up to 20 mA.
* 7 Flow rates less than the minimum flow are shown as 0 L / min.
* 5 FD-M5CAT (P) / Y (P) at
* 8 in the range of 20 to 30 L / min
The repetition accuracy is ± 5% of F.S. when the response time is 1 s.
Distributed fiber optic temperature sensing system not only
KEYENCE流量传感器,日本KEYENCE流量传感器