品Pai | 邦亿 | 型号 | QG-1 | 切割能力 | 35mm(或50mm) |
空载转速 | 2800(rpm) | 额定功率 | 1.1K(W) | 额定转速 | 2800(rpm) |
空载冲数 | 10(spm) | 电源类型 | 交流电源 | 电源电压 | 380V |
功率 | 1.1K(W) | 锯片直径 | 250(mm) | Z大锯切深度 | 50(mm) |
适用范围 | 金相试样切割 | 加工定制 | 是 | 净重 | 60(Kg) |
规格 | 35*35mm切割机,50*50mm切割机 | | |
QG-1 金相试样切割机
metallographic Specimen Cutter
用途
QG-1型金相试样切割机(以下简称切割机)是利用高速旋转的薄片砂轮秋街区金相试样,它广泛的适用于金相实验室切割各种金属材料。由于本级可附有冷却装置,用来带走切割时所产生的热量,因而避免了试样遇热而改变金相组织。
本切割机除能切割各种金属材料以外,还能切割非金属材料如塑料、胶管等。
结构特征概述
Model QG-1 metallographic Specimen Cutter, which cuts off metallographic specimens by means of thin abrasive wheel revolving at high speed is widely applicable for cutting metallc materials in melallography laboratory, Since a cooler is attacted to the machine to carry away the heat produced during cutting metallogapic structure of the specimen will not undergo any change due to overheating.
Beside cutting various metallic materials, the machine can also be used to cutnonmentallic mae-terials such as plastics rubber tubed, etc.
QG-1 50mm技术参数
1.Z大切割截面
Maximum cut-off cross-section |
5050mm |
2.砂轮机规格
Abrasive wheel |
3002x32mm |
3.转速
Revolving speed |
2800r/min |
4.电动
Motor |
1.1kw, Y90L-2,3相
PH380V, 50Hz |
5.外形尺寸
Overall dimensions |
650450400mm |
6.净重
Net Weight |
60kg |
QG-1 35mm 技术参数
1.Z大切割截面
Maximum cut-off cross-section |
35x35mm |
2.砂轮机规格
Abrasive wheel |
2502x32mm |
3.转速
Revolving speed |
2840r/min |
4.电动
Motor |
1.1kw, 3相PH380V, 50Hz |
5.外形尺寸
Overall dimensions |
650450400mm |
6.净重
Net Weight |
60kg |