Steam Cleaning System ADA-1Cleaning your vessels with acid or purified waterContaminated vessels, beakers, glass flasks, etc. are disposed to hot steam from, distilled water or nitricacid. This way of cleaning is much better than just to wash the vessels:1.) highly effective rinsing with hot steam2.) saturation of the vessel wall with ions of the cleaning solvent.This reduces adsorption effects from analytical solvents at the wall from the cleaned vessels.Benefits and features:Cleaning and preconditioning for all kind of vessels, made of glass, quartz and Teflon PTFE/PFA,ceramics and borosilicate glass.. leaches metallic ions from the surface of vessels using water or acid vapor - eliminates measurementerrors caused by vessel contamination.. vessels are continually flushed with fresh vapor - contamination is not recycled to the water/acidcontainer.. top access to cleaning chamber - easy to handle.. no cooling required - saves water consumption.. large capacity - simultaneous cleaning of up to 3 x 1 liter flasks.Description of ADA-1:The heating element is a modified Ceran heating unit. On top of that a PFA coated container with thewater / acid bowl fits. The evaporated steam is piped into the vessels. Condensed steam is guided into acollecting container. This could be sub boiled and used again. The whole unit should be placed under afume cupboard.The water / acid container can take up to 2.5 litres and with the included timer it can run several hours.A variety of vapor tubes is available. The user can easily change theconfiguration from max. 3 x 1 litre flask to 10 x 100 mm flasks orother combinations. Unused steam ports are closed with glassstoppers.Steam pipes:Besides the three standard steam tubes, we now offer modified tubesincluding movable ring made of PEEK, for beakers up to 88 mm dia.