型号 Model |
大双轨机 D630 |
测量原理 Measurement Principle |
3D 白光 PSLM PMP (可编程结构光栅相位调制轮廓测量技术,俗称摩尔条纹技术)
3D white light PSLM PMP(Programmable Spatial Light Modulation,commonly known
as moire fringe technology) |
测量项目 Measurements |
体积,面积,高度,XY偏移,形状 (volume,acreage,height, XY offset, shape ) |
检测不良类型
Detection of Non - Performing Types |
漏印、少锡、多锡、连锡、偏位、形状不良、板面污染
(missing print,insufficient tin, excessive tin, bridging, offset, mal-shapes, surface
contamination) |
相机像素 Camera Pixel |
5M,可选4M/8M/12M (4M/8M/12M as option) |
镜头类型 Lens Types |
远心镜头telecentric lens |
镜头解析度 Lens Resolution |
15um,可选8/10/13/18/20um (8/10/13/18/20um as option) |
视野尺寸 FOV Size |
38.4*30.6mm(20.5*16.3/25.6*24.5/33.3*26.5/46.1*36.7/51.2*40.8mm) |
精度 Accuracy |
XY解析度(XY Resolution):1um;高度(height):0.37um |
重复精度 Repeatability |
高度:小于1um (4 Sigma);体积/面积:小于1%(4 Sigma)
height:<1um (4 Sigma);volume/acreage:<1%(4 Sigma) |
检测重复性 Gage R&R |
远远小于10% (far less than10%) |
FOV速度 FOV Speed |
0.3s/FOV |
检测头数量
Quantity of Inspection Head |
Twin-Heads(Single Head 、Tri-Heads as option) |
红绿蓝/RGB 三色光源Red Green Blue/RGB Three
Colas Option Light Source |
标配standard configuration |
基准点检测时间 Mark-point Detection T |
0.5秒/个 (0.5sec/piece) |
Z轴实时升降补偿板弯Compensation Plate Bending
of Real-time Lift in Z-axis |
标配standard configuration |
检测高度
Maximun Meauring Height |
±550um ( ±1200um as option) |
镜头类型 Lens Types |
长焦镜头,可选远心镜头telephoto lens, telecentric lens as option |
弯曲PCB测量高度
Maximun Measuring Height of PCB Warp |
±3.5mm (±5mm as option) |
Z小焊盘间距 Minimum Pad Spacing |
100um (焊盘高度为150um的焊盘为基准pad height of 150um as the reference) |
Z小测量大小 Smallest Measuring Size |
长方形(rectangle):150um;圆形(round):200um |
PCB载板尺寸
Maximum Loading PCB Size |
双轨模式(dual-track model):50*50~510 x 300 mm
单轨模式(single track model):50*50~510 x 590 mm |
PCB板厚度 Thickness of the PCB |
0.4-7mm |
零件高度限制
Height Limitations of the Parts |
上40mm,下40mm (up:40mm down:40mm) |
板边距
Board Edge Distance |
3mm ,可选万能夹边 multifunctional clip edge as option |
定动轨设置 Flixble or Fixed Orbit Setting |
*标配1、4导轨固定,2、3轨活动;1、4轨导间距离为686mm;1、2与3、4轨导间
距离分别是300mm。*可选配1轨固定,2、3、4轨活动;
*standard configuration:track 1 and track 4 are fixed, track 2 and track 3 are flexible ,
the distance between track 1 and track 4 is 686mm, and the maximum distance
between track 1 and track, track3 and track 4 are 300mm.
*track 1 fixed, track 2,3,4 flexible as option |
PCB传送方向 PCB Transfer Direction |
左到右或右到左,出厂前设定left to right or right to left, set before delivery |
轨道宽度调整 Orbit Width Adjustment |
有两根轨道可自动调宽,出厂前设定( two tracks can automatically adjust the width,
set before delivery) |
SPC统计数据 SPC Statistics |
Histogram;Xbar-R Chart;Xbar-S Chart;CP&CPK;%Gage Repartability Data;
SPI Daily/Weekly/Monthly Reports |
Gerber和CAD导入
Gerber & CAD Data Imput |
支持Gerber格式 (274x,274d)(support Gerber format);人工Teach模式
(manual Teach model) ;CAD X/Y,Part No.,Package Type等导入 (CAD X/Y,
Part No.,Package Type imput) |
电脑类型 Computer Types |
DELL图像工作站 DELL Image Workstation |
电脑配置 ZY处理器 CPU |
Intel 双CPU 12核 (Intel double CPU 12-core as option) |
电脑配置 内存 RAM |
24G,可选32G、64G (32G、64G as option) |
电脑配置 图像处理器 GPU |
2G独立显卡 2G discrete graphics(4G DP as option) |
电脑配置 硬盘 Hard Disk |
1T |
电脑配置 DVD刻录光驱 DVD+RW |
标配 standard configuration |
电脑配置 操作系统 Operating System |
Windows 7 Professional (64位 64 bit) |
设备规格
Equipment Diemension and Weight |
W1000*D1330*H1530mm;1200KG |
电源 Power |
220V、10A |
气压 Air Pressure |
4~6Bar |
功率(启动/正常)Power (Start / nornmal) |
启动start:2.5kw / 正常运转 normal operation:2kw |
地面承重要求Loading Requirements of the Floor |
500kg/m² |
选配件 Options |
万能夹边、1D/2D Barcode扫描枪、Badmark功能、印刷机闭环控制、离线编程软件、
维修工作站、动态读拼板Mark点功能、同轴Mark点相机、UPS不间断电源
multifunctional clip edge, 1D / 2D Barcode scanner, Badmark function, print
closed-loop control, out-line programming software, maintenance was
optionkstations, dynamic Mark point read function, coaxial Mark point
camera , UPS continuous power supply |