- CAMOZZI二位三通电磁阀 意大利康茂盛二位三通电磁阀

CAMOZZI二位三通电磁阀 意大利康茂盛二位三通电磁阀

截止式用螺钉安装在阀板上安装接口面符合 ISO 15218

要选择采用耐高温的电工材料和密封材料

选用塑料王电磁阀和全不锈钢对于强腐蚀的介质

The guide hole closes the inlet pressure through the bypass hole in the chamber

KN000-306-FB8 direct-acting solenoid valve 3/2 NC must be

Off the valve around the formation of the lower under the high pressure of the fluid pressure to push the closure down the closing valve

Selection of isolation diaphragm medium medium should also use copper alloy for

Valve shell material of the solenoid valve shell often rust off, especially the action is not frequent field

制造的电磁阀而且要选择活塞式结构类型的

KN000-305-FB8直动式电磁 3/2 NC经过滤的压缩空气（过滤精度等级=

阀位机能工作方式安装方式公称直径

CAMOZZI二位三通电磁阀 意大利康茂盛二位三通电磁阀

Nominal flow rate Kv (l / min) Working pressure Operating temperature Medium

The fluid pressure pushes the closing member upwards to move the valve open when the spring force is turned on

Response time Manual device mounting position Bit 3 Normally closed [NC]

The electromagnetic force opens the pilot hole to the upper chamber pressure

The rapid drop in the closure around the formation of the upper and lower pressure difference

不锈钢电气参数电压电压允差功率消耗工作循环

电气连接防护等级 24V DC - 12V DC（可按要求提供

其他电压）±10%4 W - W - 保持100连续工作

公称流量Kv (l/min)工作压力工作温度介质

Valve Position Function Type Installation Method Nominal Diameter

Stainless steel electrical parameters voltage and voltage tolerance power consumption working cycle

Electrical connection Degree of protection 24V DC - 12V DC (available on request)

Other voltage) ± 10% 4 W - W - keep 100 continuous operation

流体压力推动关闭件向上移动阀门打开断电时弹簧力把先

响应时间手控装置安装位置位三通常闭[NC]

电磁力把先导孔打开上腔室压力

Selection of plastic Wang solenoid valve and all stainless steel for strong corrosive media

Manufacture the solenoid valve and select the piston type of structure

KN000-305-FB8 Direct Actuating Electromagnetic 3/2 NC Filtered compressed air (filter accuracy class =

迅速下降在关闭件周围形成上低下高的压差

导孔关闭入口压力通过旁通孔迅速腔室在

The cut-off type is mounted on the valve plate with screws. The mounting surface is ISO 15218

To choose the use of high temperature electrical materials and sealing materials