简述aventics空气流量传感器,安沃驰传感器用途
安装位置 任意
工作压力范围 -- / 10 bar
环境温度范围 +5°C / +50°C
4 = zero balance, 5 = output voltage, 6 = current output +,
7 = current output -, 8 = protection contact PE
Characteristics
The output signal of the air amount sensor can be
Accuracy ( full scale) See table below
Protection class IP54
Material:
Shell aluminum
■ The pressure dew point must be at least 15 ° C
Particle size max. 50? M
arbitrarily selected as a frequency signal, a voltage signal, or a current signal
The barrier is on the plug housing
Part numbers in bold are available in the German
简述aventics空气流量传感器,安沃驰传感器用途
Center Warehouse, see the shopping basket for more information.
Pneumatic products online directory developed in 2016-11-21, 响应时间 < 15 ms
精度(100%满量程) 见下表
防护等级 IP54
材料:
外壳 铝材
■ 压力露点必须至少低于环境和介质温度15 °C,并且允许 的Z高温度为 3 °C。
■ 只有按规定安装了插头,才达到了保护等级。详细信息请参阅操作说明书。
= 电源电压, 2 = 0 V, 3 = 频率信号输出,
below the ambient and medium temperature and the maximum permissible temperature is 3 ° C.
■ only when the plug is installed as specified,
the protection level is reached. For details, refer to the operating instructions.
= Supply voltage, 2 = 0 V, 3 = frequency signal output,
可以任意选取空气量传感器的输出信号,作为频率信号、电压信号或者电流信号
屏障位于插头外罩上
粗体字的物料号德国ZX仓库可提供,详细信息请见购物篮。气动产品在线目录制定于2016-11-21,![](http://item.yiqi.com/pic/ConPic/1/content10-53-13-52-3243.jpg)
Working pressure range - / 10 bar
Ambient temperature range + 5 ° C / + 50 ° C
Medium temperature range + 5 ° C / + 50 ° C
Media compressed air
4 = 零点平衡, 5 = 输出电压, 6 = 电流输出+,
7 = 电流输出 -, 8 = 保护触点 PE
特性
介质温度范围 +5°C / +50°C
介质 压缩空气
颗粒大小 max. 50 ?m
压缩空气中的含油量 0 mg/m? - 1 mg/m?
简述aventics空气流量传感器,安沃驰传感器用途