德国奥莱斯OLES进口低温用截止阀
【进口低温用截止阀】详细说明:
不锈钢低温截止阀,特别是超低温阀门,其工作温度极低。在设计这类阀门时,除了应遵循一般阀门的设计原则外,还有一些特殊的要求。不锈钢低温截止阀的设计要求: 1、阀门在低温介质及周围环境温度下应具有长时间工作的能力。2、阀门不应成为低温系统的一个显着热源。这是因为热量的流入除降低热效率外,如流入过多,还会使内部流体急速蒸发,产生异常升压,造成危险。3、低温介质不应对手轮操作及填料密封性能产生有害的影响。4、直接与低温介质接触的阀门组合件应具有防爆和防火结构。
Stainless steel Cryogenic Globe valves, especially ultra-cryogenic valves, operate at extremely low temperatures. In the design of such valves, in addition to the general valve design principles, there are also some special requirements. Design requirements of stainless steel Cryogenic Globe valve: 1. Valves should be able to work for a long time in low temperature medium and ambient temperature. 2. Valves should not be a significant source of heat for cryogenic systems. This is because in addition to reducing the thermal efficiency of heat inflow, if the inflow is too much, it will also make the internal fluid evaporate rapidly, resulting in abnormal pressure rise, causing danger. 3. Low temperature medium should not have harmful effect on handwheel operation and packing sealing performance. 4. Valve assemblies in direct contact with cryogenic media shall have explosion-proof and fire-proof structures.
【进口低温用截止阀】结构说明:
低温及超低温截止阀安装在空分设备、LNG船、低温液体贮运设备上面,对液氧、液氮、液氩、液化天然气、液化石油气等低温和深冷介质进行控制。低温及超低温截止阀采用加长阀杆、加长阀盖的结构,加长高度可以按照客户要求加高,高压低温截止阀都带有自动泄压孔,以保证中腔压力不会过高而产生危险。低温截止阀有二种阀盖设计形式。
*种是螺栓式阀盖,其阀体与阀盖用螺栓螺母连接,缠绕式垫片(316夹柔性石墨制造)。客户有特殊要求时也可采用金属环连接。
第二种是焊接式阀盖,其阀体与阀盖用螺纹连接,全焊密封。客户有特殊要求时也可采用透焊连接。
【进口低温用截止阀】优点:
1.结构简单,制造和维修比较方便。
2.工作行程小,启闭时间短。
3.密封性好,密封面间磨擦力小,寿命较长。