402-889.590 402-889.590耶拿TOC有机碳注射器

402-889.590耶拿TOC有机碳注射器

analytikjena
Consumables multi EA 5000
effective from 01.01.2010
  Priority Order number Description
Consumables general
   402-889.527 Auto-Protection valve assembly, complete
no picture available
  B 402-889.091 Lids for sample vials, 2 ml, set of 500 pieces
   402-889.652 Flow test kit
no picture available
A 402-889.182 Wires for cleaning syringe needles, set of 10 pieces
   402-007.513 FAST connector, 1 piece
(adaptor angeled for gas tubings, black)
   402-801.317 Fuse for furnace unit
T 10 A H, 20 mm
  402-820.044 Air filter for membrane dryer pump (at rear side of multi EA 5000), 1 piece
   402-889.510 Multi purpose combustion tube
 402-889.590耶拿TOC有机碳注射器
B 402-825.045 Tweezers, straight, truncated
 B 402-889.092 Sample vials, 2 ml, set of 100 pieces
(for sample rack with 112 positions)
   402-889.558 PTFE filter plate, d = 25 mm  (Auto protection replacement
filter)
Set of 5 pieces
   402-820.129 Oxygen and argon gas supply tubing
FEP, OD 6 mm (sold by meter), 1 m
 A 402-889.306 Screw cap with hole, GL 18
 
 
 402-889.557 Sealing disk, 17 mm, for plastic cap GL 18, Set of 5 pieces
   402-889.583 Special sealing 12 mm
(FAST connector at outlet of multi purpose combustion tube)
   402-822.118 Heat resistent gloves, 1 pair
Sampling modules
MMS 5000
   402-812.374 Replacement screw
(mounting of autosampler on the basic unit/ ABD)
A 402-823.079 Removable needles for 50 and 100 μl syringes, set of 3 pieces
   402-886.248 Waste hose
 A 402-889.206 Septum for rinsing vessel
   402-889.533 Syringe 50 μl, with removable needle, without markings
  402-889.534 Syringe 100 μl, with removable needle, without markings   402-889.547 Gripper for sample boats
Autoinjector
   402-889.589 Syringe 10 μl, for Autoinjector, with removable needle
recommended for higher element concentrations and systems with carbon module
   402-889.592 Syringe 100 μl, for Autoinjector, with removable needle
   402-889.590 Syringe 20 μl, for Autoinjector, with removable needle
recommeded for higher element concentrations, for systems with carbon module and for systems with only one detector module (N or S)
   402-889.591 Syringe 40 μl, for Autoinjector, with removable needle
recommended as standard syringe for N/S systems
 A 402-889.186 Removable special needles, set of 3 pieces
Manual Boat Drive - MBD
no picture
available
 402-815.839 Sealing for sample port MBD
   402-889.671 Feed  tube for MBD
   402-889.672 Hook for MBD
   402-889.670 MBD coupling tube, glass
   402-889.674 Quartz boat, 40 mm x 9 mm, set of 10 pieces
  402-889.560 Set of sealing elements horizontal 402-889.673 Sample boat, special, with downholder for special applications
(e. g. AOX by batch method, EC/OC determination), 10 pieces
Automatic boat drive - ABD
   402-889.551 ABD coupling tube, glass
   402-886.236 Sealing for sample port ABD
 A 402-881.028 Finger-Tight-Set, 1/8" for tubing, 5 ferrules and 5 screwing
 A 402-889.073 Feed tube, for MVS shunt/ABD
 A 402-889.066 Hook, for MVS shunt/ABD
suitable from MVS serial number  509 046 and higher
 402-815.838 O-ring 14 mm x 4 mm for ABD
   402-889.674 Quartz boat, 40 mm x 9 mm, set of 10 pieces
   402-889.560 Set of sealing elements horizontal
 A 402-889.050 Septum; 12.5 mm; set of 5 pieces
  402-889.673 Sample boat, special, with downholder for special applications
(e. g. AOX by batch method, EC/OC determination), 10 pieces
 A 402-889.039 Adsorption material, set of 3 pieces

Gas Sampling System - GSS
 B 402-889.148 Replacement septum for gas sampling bag 10 l, 1 piece
   402-820.057 Ferrule 1/16", 1 piece
multi EA 5000: Ferrule for special needle (PEEK), horizontal operation, 1 piece
   402-820.123 Ferrule for injection needle, vertical operation, 1 piece
 B 402-889.147 Gas sampling bag 10 l for GSS and GSS type C, 1 piece
A 402-889.180 Injection head for GSS, LPG and GSS/LPG, vertical operation, complete
A 402-823.056 Needle; 0.63 mm x 0.35 mm; for all types of syringes; set of 3 pieces
multi EA 5000: removeable injection needle for vertical operation
mode
no picture
available
  402-889.423 Septum perforated for special needle PEEK in horizontal operation mode
A 402-890.018 Special needle for GSS,LPG and GSS/LPG, horizontal operation mode, PEEK
LPG Module and GSS/LPG combi module
   402-889.439 Bubble vessel
   402-820.057 Ferrule 1/16", 1 piece
multi EA 5000: Ferrule for special needle (PEEK), horizontal operation, 1 piece
   402-820.123 Ferrule for injection needle, vertical operation, 1 piece
A 402-889.180 Injection head for GSS, LPG and GSS/LPG, vertical operation, complete
A 402-823.056 Needle; 0.63 mm x 0.35 mm; for all types of syringes; set of 3 pieces
multi EA 5000: removeable injection needle for vertical operation mode
 A 402-815.058 Lab-type screw joint D 3.2 - GL 14, complete (red)
multi EA 5000: for bubble vessel
 A 402-881.116 O-ring, i.d. = 6 mm x 3 mm
multi EA 5000: for screw cap GL 14 bubble vessel
no picture
available
  402-889.423 Septum perforated for special needle PEEK in horizontal operation mode
A 402-890.018 Special needle for GSS,LPG and GSS/LPG, horizontal operation mode, PEEK
Detection
Sulfur / nitrogen / carbon detection
no picture
available
   402-889.061 Extended Sulfur Calibration Kit; 0,05 - 10 mg/l
no picture
available
  402-889.060 Extended Nitrogen Calibration Kit; 0,05 - 10 mg/l   B 402-889.070 Sulfur Calibration Kit (0.1 - 10 mg/l) incl. blank
  B 402-889.167 Sulfur Calibration Kit (10 - 100 mg/l) incl. blank
no picture
available
 B 402-889.164 Sulfur Calibration Kit (100 - 500 mg/l)
 B 402-889.069 Nitrogen Calibration Kit ( 0.1 - 10 mg/l) incl. blank
 B 402-889.165 Nitrogen Calibration Kit (10 - 100 mg/l) incl. blank
 B 402-889.162 Nitrogen Calibration Kit (100 - 500 mg/l)
A 402-823.048 Membrane dryer
B 402-815.030 O-ring 3.0 mm x 1.5 mm (3 mm x 6 mm) set of 10 pieces
multi EA 5000: sealing for inner part of membrane dryer
Sulfur Coulometer
 A 402-889.313 Absorber tube for  Sulfur coulometer, glass
   402-820.110 Connecting hose 1/8", (sold by meter), 1m
 A 402-889.302 Diaphragma for titration cell of Sulfur coulometer
 A 402-889.308 Sealing for screw cap with hole, GL 32, Sulfur coulometer
 A 402-889.309 Sealing for screw cap with hole, GL 14, Sulfur coulometer
 
 402-889.307 Sealing for screw cap with hole, GL 18, Sulfur coulometer
A 402-889.311 Gas introduction tube for titration cell of Sulfur coulometer, glass
 A 402-520.137 Glass screw joint (gray)
multi EA 5000: (Screw joint for tube 8 mm)
 A 402-889.301 Indicator electrode for titration cell of Sulfur coulometer
 A 402-889.303 Cathode  for titration cell of Sulfur coulometer
 A 402-889.310 Stirrer bar, titration cell, Sulfur coulometer
  402-884.015 Packet with one charge of silver wool
A 402-889.305 Screw cap with hole, GL 14 for gas introduction tube and electrodes,  Sulfur coulometer
 A 402-889.306 Screw cap with hole, GL 18
 
A 402-889.304 Screw cap with hole, GL 32 Diaphragma,  Sulfur coulometer
A 402-889.314 Septa for titration cell for Sulfur Coulometer, set a 50 pieces
 402-889.300 Titration cell for Sulfur coulometer, glass
 A 402-889.312 Fitting GL zz, for absorber tube, sulfur coulometer
TC/TOC-Module
B 402-886.311 Syringe graduated 500 μl with removable needle for manual injection
 B 402-885.019 Halogen absorber, complete with U-tube
  402-810.050 Halogen absorber filling (copper- and brass wool)
  A 402-885.017 High-temperature mat, set of 3 pieces
A 402-823.056 Needle; 0.63 mm x 0.35 mm; for all types of syringes; set of 3 pieces
multi EA 5000: removeable injection needle for vertical operation
mode
 
   402-889.657 Condensation coil
no picture available
  B 402-810.059 Special catalyst platinum, sufficient for 5 refills
A 402-810.048 Special catalyst platinum, one refill
B 402-886.318 Sample vials, 8 ml
50 mm x 18 mm, 125 pieces
 A 402-884.005 Pump hose for peristaltic pump, waste
 A 402-881.006 Quartz glass cullet, coarse grains, packet of 80 g
 A 402-825.044 Quartz wool, 1 packet
   402-889.659 Septum TIC vessel
no picture available
   402-889.658 Septum combustion tube
no picture available
   402-881.245 Set of TC prefilter and water trap
   402-889.594 Syringe 250 μl with vent and removable needle
(for autosampler)
   402-889.593 Syringe 500 μl with vent and removable needle
(for autosampler)
no picture
available
   402-889.656 TIC vessel
 A 402-825.150 U-tube, o.d. = 11 mm, without filling for halogenabsorber
(without connections)
no picture
available
   402-889.655 Combustion tube
Chlorine Detection
   402-815.831 Hose to connect suction extractor at workplace or vent
lengh 70 cm
   402-889.549 Connecting part (metal) for  gas transfer line
with outside thread
   402-825.123 Beaker for sulfuric acid vessel
   402-889.561 Replacement hose for heated gas transfer line
   402-820.053 Ferrule for connecting part (metal)
for gas transfer line with outside thread
   402-820.055 Ferrule for screw joint
gas transfer line with inside thread
   402-889.559 Gas transfer hose
no picture
available
no picture
available
B 402-889.071 Chlorine Calibration Kit ( 0.1 - 10 mg/l) incl. blank B 402-889.166 Chlorine Calibration Kit (10 - 100 mg/l) incl. blank
no picture
available
 B 402-889.163 Chlorine Calibration Kit (100 - 500 mg/l)
 A 402-520.177 ferrule set,  1/4" TFE
   402-30003 Ferrule set,  1/8" PTFE
   402-825.124 Petri dish for sulfuric acid vessel
   402-889.569 Tubing inside sulfuric acid vessel with ferrule
   402-889.508 sulfuric acid vessel with outlet
   402-889.507 Safety cowl for the sulfuric acid tank
   402-825.108 Funnel for sulfuric acid vessel
   402-889.573 Connector sulfuric acid vessel
 A 402-30031 Swagelok screw fitting, 1/4" onto 1/8", PTFE
Chlorine detection with chlorine module high sensitive
  B 402-890.007 Storage vessel for sensor electrode
 A 402-889.085 Mounting to connect suction extractor at workplace, NS
14.5 brown glass
   402-99998 preamplifier for sensor electrode
 A 402-889.123 Gas introduction tube
 A 402-889.124 Set of rubber plugs; 1 x NS14, 1 x NS7
 A 402-889.112 Internal electrolyte sensor electrode, 50 ml
 A 402-815.023 Magnetic stirring bar, PTFE, 30 mm x 6 mm, 1 piece
 A 402-889.006 Platinum electrode
A 402-889.184 Electrolyte bridge
B 402-889.110 Salt solution to make up 100 ml electrolyte
  A 402-889.002 Sensor electrode     402-889.536 Silver electrode
Chlorine detection with titration cells sensitive and high concentration
   402-889.538 Storage vessel for combination electrode
 B 402-880.605 Disposable tube 18 mm x 6 mm, filled
packet of 10 pieces, for AOX determination (column method)
  402-890.610 Disposable quartz tubes 18 x 6, filled; set á 100 pieces for AOX determination (column method)
 A 402-880.211 Combination electrode (ceramic)
 A 402-815.022 Magnetic stirring bar, PTFE, 15 mm x 6 mm, 1 piece
  402-889.673 Sample boat, special, with downholder for special applications
(e. g. AOX by batch method, EC/OC determination), 10 pieces
Warranty claims and claims related to the fulfillment of manufacture's technical specification can only be accepted by using original Analytik Jena components, spares and consumables.
Specifications and order numbers are subject to changes due to further technical development.
Prices are quoted exclusive of value added tax.
Purchase is subject to the General Terms and Conditions of Analytik Jena AG.