德国托普TOP 进口二通黄铜电磁阀|进口黄铜二通电磁阀

进口二通黄铜电磁阀

德国托普进口二通黄铜电磁阀工作原理：

进口黄铜电磁阀是用来控制流体的自动化基础元件，属于执行器；并不限于液压，气动。电磁阀用于控制液压流动方向，工厂的机械装置一般都由液压钢控制，所以就会用到电磁阀。电磁阀里有密闭的腔，在的不同位置开有通孔，每个孔都通向不同的油管，腔中间是阀，两面是两块电磁铁，哪面的磁铁线圈通电阀体就会被吸引到哪边，通过控制阀体的移动来档住或漏出不同的排油的孔，而进油孔是常开的，液压油就会进入不同的排油管，然后通过油的压力来推动油刚的活塞，活塞又带动活塞杆，活塞竿带动机械装置动。这样通过控制电磁铁的电流就控制了机械运动。

Brass solenoid valve is used to control the flow of the basic components of automation, is the actuator; not limited to hydraulic, pneumatic. Solenoid valve used to control the direction of hydraulic flow, the factory's mechanical devices are generally controlled by hydraulic steel, so the solenoid valve will be used. Solenoid valve in a closed chamber, at different locations to open a hole, each hole leads to different pipeline, the middle valve chamber, both sides are two electromagnets, which face the magnet coils body will be attracted to which side, different discharge of oil through the control valve moves to block or leakage the hole, and the oil inlet hole Shichang opened, hydraulic oil will enter the drain pipes of different, then the oil pressure to push the piston oil just, piston and piston rod, the piston rod drive mechanism moving. By controlling the current of the electromagnet, the mechanical motion is controlled.

进口二通黄铜电磁阀概述：

进口二通黄铜电磁阀为分步动作直接先导式电磁阀，可根据断电时所处开、关状态的不同，可分为常闭式电磁阀和常开式电磁阀。  常闭电磁阀，线圈通电后，衔铁在电磁力作用下先带动副阀阀塞提起，主阀阀杯上的流体经副阀流走，减少了作用在主阀阀杯上的压力，当主阀阀杯上的压力减少到一定值时，衔铁带动主阀阀杯，并利用压差而使主阀阀杯开启，介质流通。 线圈断电后，电磁力消失，衔铁因自重下落复位。同时依靠介质压力，主副阀得以紧密关闭。电磁阀定制方案提供商-电子（流体控制阀）  常开电磁阀，线圈通电后由于吸力作用，动铁芯下移，把副阀阀塞压下，副阀关闭，主阀阀杯内压力上升，当压力升到一定值时，主阀阀杯的上下压差一样，由于电磁力作用，动铁芯推动主阀阀杯下，压紧主阀阀座，阀门关闭。电磁阀定制方案提供商-电子（流体控制阀） 线圈断电时，电磁吸力为零，副阀阀塞和动铁芯由于弹簧作用向上提起，副阀打开，主阀阀杯上的流体经副阀流走，减少了作用在主阀阀杯上的压力，当主阀阀杯上的压力减少到一定值时，利用压差把主阀阀杯推起，电磁阀打开，介质流通。电磁阀定制方案提供商-电子（电磁阀定制）

Imported two way brass solenoid valve for the direct action of the pilot solenoid valve, according to the opening and closing of the state of the different, can be divided into normally closed solenoid valve and normally open solenoid valve. Normally closed solenoid valve coil is energized, the armature of the electromagnetic force of the first drive side valve SETI, the main valve cup of the fluid flow out by the vice valve, reducing the pressure in the main valve valve cup, when the main valve to reduce pressure on the cup to a certain value, the armature driving the main valve valve cup, and use pressure to open the main valve cup, medium circulation. Coil power, the electromagnetic force disappears, the armature weight whereabouts reset. At the same time rely on medium pressure, the main valve to close tightly. Customized solutions provider - Electronic solenoid valve (flow control valve) normally open solenoid valve, the suction after the coil is energized, moving core down, the vice valve pressure, the Deputy valve closed, the main valve valve cup pressure rise, when the pressure rose to a certain value, the main valve valve cup. Differential pressure, due to electromagnetic force, the moving core to promote the main valve cup, pressing the main valve seat, the valve closed. Customized solutions provider - Electronic solenoid valve (flow control valve) coil power, the electromagnetic force is zero, the Deputy valve plug and the moving core as spring lift, vice valve is opened, the main valve cup of the fluid flow out by the vice valve, reducing the pressure in the main valve cup. When the main valve to reduce pressure on the cup to a certain value, the use of pressure to push the main valve cup, electromagnetic valve open, medium flow. Solenoid valve customized solutions provider - Electronic (solenoid valve custom)

进口二通黄铜电磁阀技术参数：

压力：0～10kg/cm2 zui大耐压力：16kg/cm2

工作温度：-5～80℃ 电压波动范围：±10%  动作方式：直动式
型式、常闭式（即通电后阀开启，或常开式（通电阀关闭）。
工作寿命＞15万次  绝缘等级：B级  经圈温升＜75℃
功率＜15W  口径范围：DN10-50(3/8”-2) 阀体材质：黄铜 连接方式：螺纹