TYPE-81C 住友（SUMITOMO ELECTRIC） TYPE-81C光纤熔接机熔纤机_详细资料

产品信息

住友(SUMITOMO ELECTRIC) TYPE-81C光纤熔接机熔纤机
华盛电子仪器长期专业回收、销售、租赁、全新二手仪器仪表!!咨询
TYPE-81C 纤芯直视型光纤熔接机

小型、轻量、高速
重量仅2.1公斤(带电池)
电池可持续熔接加热230次
熔接时间仅6秒，加热补强时间仅14秒(Quick模式下)
触摸屏控制
全导航触摸屏界面，使操作更简单更便捷
4.1英寸彩色LCD显示
更完善的耐环境特性
IPx2 防水性
IP5x 防尘性
50°C温度下可熔接作业
海拔6000m高度可工作
76cm高度坠落（5面）抗冲击
带灵活夹具的双联加热器
独立
快速
GX
可编程序
用户可选择夹具操作
帮助视频
熔接机内置了帮助视频，用户能够便利地确认熔接操作顺序。
规格参数
TYPE-81C (更多信息请)

Applicable optical fiber Material Silica Glass
Profile type Single Mode Fiber (SMF)/ITU-T G652
Multi Mode Fiber (MMF)/ITU-T G651
Dispersion Shifted Fiber (DSF)/ITU-T G653
Non-Zero Dispersion Shifted Fiber (NZ-DSF)/ITU-T G655, G656
Bend Insensitive Fiber (BIF)/ITU-T G657
Erbium Doped Fiber (EDF)
Number of fiber Single
Cladding diameter φ80 to φ150 μm *1
Coating diameter φ100 to φ1,000 μm
Cleave length 5 to 16 mm (with coating clamp)
10mm (Drop cable / Indoor cable with fiber holder)
Applicable Cable*2*3 0.25 mm primary coated 1-fiber drop cable 3.1mm or 2.6mm×2.0mm (excluding messenger steel wire)
0.25 mm primary coated 1-fiber indoor cable 2.0mm×1.6mm
Splice Performance Splice loss (typical)*4 SMF : 0.01 dB
MMF: 0.01 dB
DSF : 0.03 dB
NZDSF : 0.03 dB
Return loss (typical) 60dB or greater
Screening load (typical) 1.96N - 2.09N (at stage)
Splice time (typical) Approx. 6 seconds (SM G652 Quick Mode)
Approx. 7 seconds (SM G652 Std. Mode)
Approx. 8 seconds (Auto Mode)
Automatic fiber identification SMF / MMF / DSF / NZDSF / BIF / Other
Splice & Heat cycles*5 Approx. 230 cycles
Fiber view & magnification 2 CMOS cameras observation,
320X (zoom : 700X) for X or Y single axis view, 88X for X & Y
dual axis view
Splice program Maximum 300 splice programs can be selected and customized.
Splice data storage 10,000 splices
Splice image capture 200 splices
Fiber Alignment method Core Aligns the left and right fibers by the center of their cores.
Adaptive The alignment method mainly for BIF. It is used in splicing
optical fiber with complicated core profiles.
Diameter Aligns the left and right fibers by their outer diameter.
AIAS The axis is moved beforehand. AIAS is effective to splicing of fiber with high eccentricity.
ATTN “Attenuation”. Fibers are spliced by shifting the centers of the left
and right fiber cores to achieve intentional high splice losses.
Heater Performance The number of heaters 2 built-in heaters are available
Sleeve length Up to 60mm
Protection sleeve *6 The protection sleeve for single fiber, up to 60mm
length, up to φ5mm diameter.
e.g.
FPS-1 (single, 60mm, Cleave length 5-16mm)
FPS-61-2.6 (thin, single, 60mm, Cleave length 5-16mm)
FPS-40 (single, 40mm, Cleave length 5-10mm)
FPS-40-2.6 (thin, single, 40mm, Cleave length 5-10mm)
Heating time(typical) *7 Approx. 14 seconds (Slim 60mm 0.25 Quick Mode)
Approx. 18 seconds (Slim 60mm 0.25 Std. Mode)
Program Max. 100 settings
Physical Characteristics Size (Main body) *8 120W×154D×130H(mm)
Weight Approx. 2.1 kg (With Battery pack BU-11)
Display size 4.1" touch screen color LCD display
V-groove illumination White LED
Power Conditions Power consumption Max. 110W
AC operation With AC adapter ADC-1430S
Input: AC 100-240V 50/60Hz 1.1A
DC operation Input: DC 10-15V, 7.5A
Battery operation (With BU-11) 11.1V (4600mAh)
DC output 12V For Sumitomo’s hot jacket remover
In - Out Terminal Serial port USB 2.0 mini-B type
Storage media SD / SDHC memory card
Environmental Conditions Operating temperature -10 to +50°C
Storage temperature -40 to +80°C
Humidity 0 to 95%RH with no dew present
Altitude Up to 6,000 m
Environmental Durability*9 Shock resistance Drop from 76cm on 5 faces (Excluding top face)
Water resistance Equivalent to IPx2 (Operates normally after being exposed to water dripping at 3mm/min. for at least 2.5 min on each of 4 surfaces tilted at 15 degree.)
Dust resistance Equivalent to IPx5 (Operates normally after 8 hours in a dust chamber containing dust of particle size 75 um or below)
*1 在室温环境下适合的包层直径(除φ125μm)。
*2 各种光纤夹具适用不同涂覆层和芯数的光纤。
*3 光纤夹具不能用于松套管光缆。
*4 在室温条件下，用住友同种光纤以ITU-T和IEC标准的切断法测得。
*5 熔接加热的操作次数很大程度上受电池状态和作业环境影响。
*6 长度为40mm的保护套管只能用于切断长小于10mm的光纤。并且40mm的保护套管不能用于超过涂覆层光纤直径φ250μm的光纤。
*7 涂覆层直径φ250μm的光纤在室温下并且使用AC电源供电不使用DC电源的情况下，可使用住友FPS-61-2.6保护套管。
*8 不包含有突起的部分。
*9 住友对电池性能进行了试验和确认，但不保证本产品受损情况下的状态。

Applicable optical fiber	Material	Silica Glass
Profile type	Single Mode Fiber (SMF)/ITU-T G652 Multi Mode Fiber (MMF)/ITU-T G651 Dispersion Shifted Fiber (DSF)/ITU-T G653 Non-Zero Dispersion Shifted Fiber (NZ-DSF)/ITU-T G655, G656 Bend Insensitive Fiber (BIF)/ITU-T G657 Erbium Doped Fiber (EDF)
Number of fiber	Single
Cladding diameter	φ80 to φ150 μm *1
Coating diameter	φ100 to φ1,000 μm
Cleave length	5 to 16 mm (with coating clamp) 10mm (Drop cable / Indoor cable with fiber holder)
Applicable Cable23	0.25 mm primary coated 1-fiber drop cable	3.1mm or 2.6mm×2.0mm (excluding messenger steel wire)
0.25 mm primary coated 1-fiber indoor cable	2.0mm×1.6mm
Splice Performance	Splice loss (typical)*4	SMF : 0.01 dB MMF: 0.01 dB DSF : 0.03 dB NZDSF : 0.03 dB
Return loss (typical)	60dB or greater
Screening load (typical)	1.96N - 2.09N (at stage)
Splice time (typical)	Approx. 6 seconds (SM G652 Quick Mode) Approx. 7 seconds (SM G652 Std. Mode) Approx. 8 seconds (Auto Mode)
Automatic fiber identification	SMF / MMF / DSF / NZDSF / BIF / Other
Splice & Heat cycles*5	Approx. 230 cycles
Fiber view & magnification	2 CMOS cameras observation, 320X (zoom : 700X) for X or Y single axis view, 88X for X & Y dual axis view
Splice program	Maximum 300 splice programs can be selected and customized.
Splice data storage	10,000 splices
Splice image capture	200 splices
Fiber Alignment method	Core	Aligns the left and right fibers by the center of their cores.
Adaptive	The alignment method mainly for BIF. It is used in splicing optical fiber with complicated core profiles.
Diameter	Aligns the left and right fibers by their outer diameter.
AIAS	The axis is moved beforehand. AIAS is effective to splicing of fiber with high eccentricity.
ATTN	“Attenuation”. Fibers are spliced by shifting the centers of the left and right fiber cores to achieve intentional high splice losses.
Heater Performance	The number of heaters	2 built-in heaters are available
Sleeve length	Up to 60mm
Protection sleeve *6	The protection sleeve for single fiber, up to 60mm length, up to φ5mm diameter. e.g. FPS-1 (single, 60mm, Cleave length 5-16mm) FPS-61-2.6 (thin, single, 60mm, Cleave length 5-16mm) FPS-40 (single, 40mm, Cleave length 5-10mm) FPS-40-2.6 (thin, single, 40mm, Cleave length 5-10mm)
Heating time(typical) *7	Approx. 14 seconds (Slim 60mm 0.25 Quick Mode) Approx. 18 seconds (Slim 60mm 0.25 Std. Mode)
Program	Max. 100 settings
Physical Characteristics	Size (Main body) *8	120W×154D×130H(mm)
Weight	Approx. 2.1 kg (With Battery pack BU-11)
Display size	4.1" touch screen color LCD display
V-groove illumination	White LED
Power Conditions	Power consumption	Max. 110W
AC operation	With AC adapter ADC-1430S Input: AC 100-240V 50/60Hz 1.1A
DC operation	Input: DC 10-15V, 7.5A
Battery operation	(With BU-11) 11.1V (4600mAh)
DC output	12V For Sumitomo’s hot jacket remover
In - Out Terminal	Serial port	USB 2.0 mini-B type
Storage media	SD / SDHC memory card
Environmental Conditions	Operating temperature	-10 to +50°C
Storage temperature	-40 to +80°C
Humidity	0 to 95%RH with no dew present
Altitude	Up to 6,000 m
Environmental Durability*9	Shock resistance	Drop from 76cm on 5 faces (Excluding top face)
Water resistance	Equivalent to IPx2 (Operates normally after being exposed to water dripping at 3mm/min. for at least 2.5 min on each of 4 surfaces tilted at 15 degree.)
Dust resistance	Equivalent to IPx5 (Operates normally after 8 hours in a dust chamber containing dust of particle size 75 um or below)

您可能感兴趣的产品

TYPE-81C 住友（SUMITOMO ELECTRIC） TYPE-81C光纤熔接机熔纤机

产品信息

联系我们

关注我们

TYPE-81C 住友（SUMITOMO ELECTRIC） TYPE-81C光纤熔接机 熔纤机

产品信息

联系我们

关注我们

TYPE-81C 住友（SUMITOMO ELECTRIC） TYPE-81C光纤熔接机熔纤机