主要参数
１、交流电压输出
0～250V连续可调，zui大输出容量600VA,过量程保护260V，误差为±1％。
２、交流电流输出
0～50A，0～100A连续可调，误差为±1％。
0～50A时，开路电压5V。
0～100Ａ时，开路电压10Ｖ。过载保护动作电流120A。
３、直流电压输出
0～250V连续可调，zui大电流2A，过量程保护260V,过载保护动作电流2.1A±5%。误差为±1％
４、直流电流输出
0～200mA 0～5 A连续可调，误差为±1％。
0～200mA时，开路电压48V，过载保护动作电流230mA。
0～5A时，开路电压24V,过载保护动作电流5.2A。
５、直流电压固定输出
单独输出110V或220V时,电流可达2.5A，但和交流电压电流，直流电压同时输出时。其总容量不能超过600VA。
６、数字毫秒表
zui大量程：999秒
分辨率：0.1毫秒
精 度：0.1％±1个字
７、仪表准确度采用四位半A／D转换,精度0.1％读数±1个字
８、整机测量精度：≤1%
９、体积：480mm×320mm×160mm
１０、重量：18Kg
The main characteristics of testers
1.As the single-phase relay tester adopting microcomputer control, therefore there are only 16 touch switches on the panel, that can complete varies of testing functions, change the old-fashioned relay protect tester which must turn off the power switch and toggle switch to convert power supply type, easy to operate. The single-phase relay tester set self-checking and error function, which convenient for inspection and maintenance.
2.The single-phase relay tester set comprehensive self-checking and self-protection function, which can make immediay self-checking after booting, in the process of overload and over-range measuring, the protection circuit will quickly cut off output, and will give a sounding and light alarm to reduce the unnecessary losses due to misuse greatly.
3.The single phase relay tester with high inligence, just press a button, that you can measure all the general electric relay parameters, automatically printing, and allowing you free from the tedious testing operation.
4.The device display screen unit, clearly reflect of operating status will show on the display screen.
5.The printed data will all be displayed in English characters, such as "pull-in voltage", "disconnect voltage", "normally open pull-in time" and so on.
The parameters of the products
1. AC voltage output
0 ~ 250V continuously adjustable , the maximum output capacity is 600VA, over- range protection is 260V, error of ± 1%.
2.AC current output
0 ~ 50A, 0 ~ 100A continuously adjustable error of ±1%.
0 ~ 50A , the open circuit voltage is 5V.
0 ~ 100A , the open circuit voltage is 10V. Overload operating current is 120A.
3.DC voltage output
0 ~ 250V continuously adjustable , the maximum current is 2A, over- range protection is 260V, overload trip current is 2.1A ± 5%. Error of ± 1%
4.DC current output
0 ~ 200mA 0 ~ 5 A continuously adjustable error of ± 1%.
0 ~ 200mA , the open circuit voltage is 48V, overload operating current is 230mA.
0 ~ 5A , the open circuit voltage is 24V, overload protective current is 5.2A
5.DC voltage fixed output
The current will up to 2.5A, when the separate output is 110V or 220V. However when AC voltage current and DC voltage current output simultaneously, the total capacity can not exceed 600VA.
6.Digital millisecond meter
Maximum Range: 999 seconds
Resolution: 0.1 millisecond
Accuracy : 0.1% ± 1 word
7.The device adopts four and half- meter A / D conversion , the accuracy is 0.1 % and reading ± 1 word.
8.Accuracy of whole measurement: ≤1%
9.Volume : 480mm×320mm×160mm
10.Weight : 18Kg
