TP9 TP9防爆安全温度计（THERMO）油库炼厂船舶温度测量数字式温度计

TP9防爆安全温度计(THERMO)油库炼厂船舶温度测量数字式温度计

TP9采用RTD设计，密封覆盖的工业质量给用 户提供了一个容易用手套操作的界面。不锈钢外 壳保护电路板和液晶屏，防止遭受水等液体渗透 的影响。

TP9电路板是从高度精确、可靠及 成功的TL1实验室温度计一步步演变而来。电源 按钮的主要功能是提供仪器上次按触后约20分钟 的电量， 为了忍受环境以及内在的安全，制造TP9的 材料都是既能防止石化产品的腐蚀，又能够防 爆。外壳由不锈钢制成。探头的构造使用不粘电 缆和不锈钢传感器组件。

规格：

zui大尺寸：10“长×4.25”高x 6.4“宽
探针：304不锈钢，密封胶，聚芳酯纤维增强体全氟乙烯丙烯共聚物或全氟烷氧基树脂 电缆护套，同轴电缆
壳体材料：不锈钢，聚甲醛（聚甲醛）探头支架，聚氯乙烯面板，不锈钢紧固件

电池：2节AA碱性电池寿命约200小时，电池制造商的电池工作 温度范围-4 至130℉, -20 至 54℃

注：如果环境温度极低或极高电池可能无法提供充足的电力

温度：分辩率：0.01

范围：-40 至+400℉

             -40 至+204℃

精确度：

±0.2℉ 从 32 至 200℉

±0.5℉从 200 至 400℉

±0.1℃ 从 0 至 100℃

±0.3℃ 从 100 至 200℃

 4点NIST可追踪测试报告

长期漂移不超过0.05％/年 符合API要求

操作属性

易于更换的AA电池，提供的估计200小时运行。

逻辑电路会自动显示电池电量不足时，自动关机二十分钟后，显示温度趋势和稳定，故障确定显示的错误代码。

低功耗背光，方便夜间操作是为了方便和节约电池的光电传感器控制。

在夜间条件下的背光照明显示。

摄氏或华氏单位C/F的指示可以很容易地从功能按钮选择。

典型应用

密闭输送，库存，储罐，管道，驳船，船舶，铁路槽， 油罐车（推荐操作：API7，油轮和油码头安全指南）

其他应用：检验系统API4

物质材料：所有石化产品，腐蚀性，耐酸、碱，粉末。糖蜜，糖浆，蒸馏酒。

 PETROLEUM GAUGING THERMOMETER

The TP9 employs the proven RTD design that has been used in the TP7 and TP8 for many years. A sealed industrial quality overlay provides a user interface that is easy to use with gloves. A stainless steel enclosure protects the circuit board and large LCD from penetration by impact, water and reactive liquids.

The new TP9 circuit board is an evolutionary step up from our highly accurate, reliable and successful TL1 laboratory thermometer. The Power Button’s primary function powers the instrument for intervals of about 20 minutes since the last button was accessed. The Power Button can also be used to conserve power and clear the memory, or to make adjustment while in calibration mode. A simple menu operation is displayed by holding the Function Button, and alternay functions to allow adjustments in the calibration mode. Arrows on the left side of the display show the direction of the temperature reading and whether stability has been reached. At the user’s discretion stabilized temperatures can be logged at numerous liquid levels for a running average and later displayed for the user’s documenting purposes. But this feature never interferes with simply getting an accurate temperature reading.

To endure the environment and be intrinsically safe, the TP 9 is manufactured of materials, which are both immune to petrochemicals and are non-sparking. The enclosure is made of stainless steel. The probe assembly is constructed using non-stick cable and stainless steel sensor components.

 SPECIFICATIONS

 Maximum Dimensions: 10”L x 4.25”H x 6.4” W

 Probe: 304 Stainless Steel, Sealant, Aramid Fiber Reinforced, FEP or PFA Cable Jacket, Coaxial Construction

Enclosure Material: Stainless Steel  Acetal (Delrin) Probe Holder Polyvinylchloride Faceplate

 Batteries: 2 AA Alkaline; Battery Life of approximay 200 hours Battery manufacturer’s battery operating temperatature range -4 to 130°F, -20 to 54°C

Note: Battery may not provide adequate power if ambient temperature is extremely low or high.

Temperature: Resolution 0.01

Range: -40 to +400°F

-40 to +204°C

Calibrated Accuracy:

±0.2°F from 32 to 200°F ±0.5°F from 200 to 400°F

±0.1°C from 0 to 100°C ±0.3°C from 100 to 200°C 4 Point NIST Traceable Report of Test

Long-term drift not to exceed 0.05%/year

Meets API requirements

 OPERATIONAL ATTRIBUTES

 Easily replaceable AA Batteries, provides an estimated *200 hours

operation.

Circuit logic automatically indicates low battery condition, automatically shuts off after twenty minutes, shows temperature trend and stabilization, displays error codes for failure determination.

The low power backlight for night operation is photo sensor controlled for convenience and battery conservation.

In nighttime conditions the backlight illuminates the display.

Celsius or Fahrenheit units with C/F indication can be easily selected from the Function Button.

User Manual explains intuitive calibration procedure that can be done through the external faceplate buttons.

 TYPICAL APPLICATIONS

Custody Transfers, Inventory, Tank, Pipeline, Barge, Ship, Railcar, Tank Truck. (Recommended Operation: API 7, Intl. Safety Guide For Oil Tankers and Terminals.)

Other Applications: Proving Systems (API 4)

Materials: All petrochemicals, caustic, acid, alkalies, powders. Molasses, syrups, distilled spirits.

Thermoprobe电子温度计探头

Replacement 75 foot/23 meter sensor & cable assembly for TP5/TP5C/TP-7/TP7C/ TP-8/TP9, with extra weight sensor and standard markers on cable.

75 foot/23m cable & sensor assembly for ThermoProbe models TP5/TP5C/TP-7/TP7C/ TP-8/TP9,  Cable is marked at 5 foot intervals with brass ferrules