KP235 INFINEON压力芯片KP235

品Pai	infineon	型号	KP235
种类	压力	制作工艺	集成
输出信号	数字型

产品描述kp235一个小型化模拟气压空气压力传感集成电路以一个为依据电容的原则。它是表面微机械同一个单片整合信号调理线路执行在功率因子前置稳压器技术。传感器兑换一个压力到一个类似物输出信号。校准传递函数兑换一个压力的40饱和蒸气压115饱和蒸气压到一个0。5的电压范围各变量4。5各变量。芯片被包在一个“绿色”说明档收容。传感器已经是主要地开发为测量气压空气压力，然而能也被使用在其他应用领域。高精度，设备的高灵敏度走完路程一个完成式适合提前汽车应用以及在产业，消费者应用。特征特征以下的特征被支持kp235:l精度高压力传感(±1。2饱和蒸气压)l比例模拟输出l大温度范围(-40°c-125°c)l断丝发现l“绿色”8根针说明档收容l汽车修饰目标应用kp235被确定使用在遵循目标应用:l汽车应用(气的空气压力测量)l工业控制l消费者应用lYL应用l气象站l高度表功能描述压力被检测由大量的电容的表面微机械传感器细胞。传感器细胞产量被放大，温度补偿，线性化获得一个输出电压那与成比例的外加电压。传递函数为线性化被计算在指部分传感器使用一个第三个人多项式计算。传递函数被创建从下面参数:lZ大Z小额定压力l电压水平Z大Z小额定压力产出是类似物，比例关于电源电压。一切参数需为完整校准算法—例如抵销，获得，温度偏移与增益的系数，线性化参数—被确定以后的的集会，参数被保存在一个整合E²PROM The E²PROM内容被保护同前向纠错(一个一误码被检测，纠正，不止一个的错误咬被检测，输出信号被切换到大地电位)。开押信号发现当芯片不是激励妥善，结型场效应管晶体管的断丝发现阶段selfconducting。例如，如果接地连接被打断，产出被吸引非常vdd。同样地，如果vdd连接被打破，产出被吸引接地。1 Product DescriptionThe KP235 is a miniaturized Analog Barometric Air Pressure Sensor ICbased on a capacitive principle. It is surface micromachined with amonolithic integrated signal conditioning circuit implemented in BiCMOStechnology.The sensor converts a pressure into an analog output signal. Thecalibrated transfer function converts a pressure of 40 kPa to 115 kPa intoa voltage range of 0.5 V to 4.5 V.The chip is packaged in a “green” SMD housing. The sensor has beenprimarily developed for measuring barometric air pressure, but can alsobe used in other application fields. The high accuracy and the highsensitivity of the device makes it a perfect fit for advanced automotiveapplications as well as in industrial and consumer applications.1.1 FeaturesFollowing features are supported by the KP235:• High precision pressure sensing (±1.2 kPa)• Ratiometric analog output• Large temperature range (-40 °C to 125 °C)• Broken wire detection• “Green” 8 pin SMD housing• Automotive qualified1.2 Target ApplicationsThe KP235 is defined for use in following target applications:• Automotive applications (barometric air pressure measurement)• Industrial control• Consumer applications• Medical applications• Weather stations• Altimeters2 Functional DescriptionThe pressure is detected by an array of capacitive surface micromachined sensor cells. The sensor cell output isamplified, temperature compensated and linearized to obtain an output voltage that is proportional to the appliedpressure.The transfer function for linearization is computed in the digital part of the sensor using a third order polynomialcalculation. The transfer function is created from the following parameters:• Minimum and maximum rated pressure• Voltage level at minimum and maximum rated pressureThe output is analog and ratiometric with respect to the supply voltage.All parameters needed for the complete calibration algorithm — such as offset, gain, temperature coefficients ofoffset and gain, and linearization parameters — are determined after assembly. The parameters are stored in anintegrated E²PROM. The E²PROM content is protected with forward error correction (a one bit error is detectedand corrected, errors of more than one bit are detected and the output signal is switched to ground potential).Open Bond DetectionWhen the chip is not powered properly, the JFET transistors of the broken wire detection stage are selfconducting.For example, if the GND connection is interrupted, the output is drawn strongly to VDD. Similarly, ifthe VDD connection is broken, the output is drawn to GND.