B-100AP高强度紫外灯的主要特点Main Features
·The B-100 Series lamps are available in a variety of styles: All "P" series lamps come with the special heat-resistant plastic Cool-TouchTM housing which allows users to handle the lamp head regardless of how long the lamp has been operating. These rugged lamps can be placed face down on a working surface without damage to the filter. The non "P" models are built with an aluminum lamp head.
·A 100 watt spot bulb is standard with all models (except the B-100SP); the bulb is rated at 5000 hours.
·Self-ballasted bulb included with the B-100SP has an average life of 450 to 2000 hours depending on use patterns
·The lamp head connects to the transformer base for hands free use (all models except B-100SP) allowing the lamp head to rotate a full 360°; remove the lamp from the base for additional mobility
B-100AP高强度紫外灯的应用Applications
Fluorescence Inspections
Non Destructive Testing
Leak Detection
Readmission
UV Applications Notes
UV Application List
B-100AP and B-100AP/R
B-100AP models feature 100 watt longwave UV, Cool-Touch housing and ballast base. At 18 in. (457 mm), the lamp produces a highly intense center of UV irradiance about 5 in. (127 mm) in diameter. Lamp head can rotate 360 degrees when attached to the base for hands-free operation or lamp can be removed from the base. 8 ft primary and secondary cords. For added mobility, select the B-100AP/R which includes 20 ft (6.1m) primary and secondary cords. Uses for these lamps include non-destructive testing and fluorescence inspection.
B-100A and A-100AR
The longwave B-100A is manufactured with a scratch-resistant aluminum housing which connects to ballast base with an 8 foot cord; 8 foot secondary cord is included. The 100 watt longwave UV bulb is excellent for inspection applications. For increased mobility, select the B-100AR which includes 20 ft (6.1m) primary and secondary cords. Uses for these lamps include non-destructive testing and fluorescence inspection.
B-100SP
This 140 watt longwave, self-ballasted lamp is a highly portable, high intensity lamp for automotive leak detection applications. The ballast is built directly into the bulb. The B-100SP features the Cool-Touch housing and an 8 ft. (2.44m) cord.
B-100Y and B-100YP
These models feature a yellow filter which blocks wavelengths shorter than 500nm and produces three strong mercury lines at 543, 574 and 576nm. The high contrast light is produced for fine surface particle detection. Particles down to 10 microns are routinely visible with this lamp. B-100Y is built with the aluminum housing; B-100YP with a plastic housing. These lamps are excellent for semiconductor wafer inspection as most photoresist absorption occurs below 450nm.
B-100系列高强度紫外灯的型号选择：
| 115V | 230V | Model | Description | Intensity
2"/10"(uW/cm2) |
| 95-0044-22 | 95-0044-02 | B-100A | Longwave UV Lamp, 230 Volts | 21,700/8,900 |
| 95-0044-03 | 95-0044-04 | B-100A/R | Longwave UV Lamp 20 ft. cords, 115 Volts | 21,700/8,900 |
| 95-0127-01 | 95-0127-02 | B-100AP | High Intensity 100 Watt Longwave UV Lamp, Cool-Touch Housing, 230 Volts | 21,700/8,900 |
| 95-0127-06 | 95-0127-07 | B-100AP/R | High Intensity 100 Watt Longwave UV Lamp
20 ft cords, Cool-Touch Housing, 230 Volts | 21,700/8,900 |
| 95-0128-01 | N/A | B-100SP | High Intensity 140 Watt Longwave UV Lamp, Cool-Touch Housing, 115 Volts | 11,600/5,000 |
| 95-0044-24 | 95-0044-18 | B-100Y | High Intensity Wafer Inspection Lamp,
Yellow Filter, 230 Volts | |
| 95-0127-03 | 95-0127-04 | B-100YP | High Intensity Wafer Inspection Lamp, Yellow Filter, 100 Watt, Cool-Touch Housing, 115 Volts | |
B-100AP高强度紫外线灯-100瓦365nm紫外灯，其独特的设计可以应用在汽车行业中，用来检测设计漏洞，B-100系列已被福特，Vauxhall和其他汽车公司使用，在线路搭乘制造，矿物学研究等也有应用。
B-100AP紫外线灯外壳由Cool-Touch阻热材料制造，可以长时间使用而不会产生高温，手持灯头可在支座上360度旋转。
